고리 원전 밀림관 노즐의 동종용접과 예방용접 Overlay가 보수용접 잔류응력에 미치는 영향
Effect of Similar Metal Weld & Preemptive Weld Overlay On Residual Stress of Repair Weldment In Surge Nozzle
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
용접과정 중 발생되는 인장잔류응력은 원전 배관 이종용접부의 PWSCC가 발생되는 원인 중 하나라고 알려져 있다. 일반적으로 보수용접은 용접과정 중 흔히 일어나는 현상이다. 보수용접은 강한 인장잔류응력을 유도하기 때문에 이종용접부의 PWSCC를 유도하기 쉽다. 본 논문에서는 강한 인장잔류응력이 발생되는 보수용접부에 대해 보수용접 깊이에 따라 동종용접과 예방용접 overlay로 인하여 인장잔류응력의 크기가 변화하는 것을 정량적으로 확인하였다.
Abstract
Welding residual stress is occurred after welding process. Tensile residual stress is one factor of PWSCC. Repair welding usually happened during the manufacturing welding process. Repair welds cause strong tensile residual stress. In PWR, Repair weldments made by Alloy 82/182 is susceptible to PWSCC caused by tensile stress, material and environment. Therefore, mitigation of welding residual stress in weldments is important for reliable operating. PWOL is one of the methods for mitigation and verified for over twenty years. In this paper, residual stress distribution of repaired weldments and the effect of PWOL on mitigation is examined for surge nozzle.
참고문헌 (21)
- ASME, "Materials, ASME Boiler and Pressure Vesse l Code, Sec.II, PartD-Properties", ~ (2004)
- ASME Code Case N-740, "Dissimilar Metal Weld Overlay for Repair of Class 1, 2, and 3 Items, ASME Boiler and Pressure Vessel Code, Sec.XI, Division I", ~
- Brickstad, B., "A Parametric Study of Residual Stresses in Multi-Pass Butt- Welded Stainless Steel Pipes", International Journal of Pressure Vessels and Piping, 75, pp.11~25 (1998)
- British Energy Generation Ltd., "Assessment of the Integrity of Structures Containing Defects, R6, Revision 4", ~ (2006)
- Brust, F.W., "Weld Residual Stresses and Primary Water Stress Corrosion Cracking in Bimetal Nuclear Pipe Welds", Trans. of ASME PVP Conference (2007)
- Courtin, S., "Detailed Simulation of an Overlay Repair on a 14 Dissimilar Material Weld", Trans. of ASMEPVP Conference (2006)
- Dennis, R.J., "Optimisation of Weld Modeling Techniques-Bead on Plate Analysis", Trans. of ASME PVP (2006)
- Dong, P., "Residual Stress Analyses of a Multi-Pass Girth Weld: 3-D Special Shell Versus Axisymmetric models", ASME Journal of Pressure Vessel Technology, 123, pp.207~213 (2001)
- Elocate, C.D., "Three Dimensional Multi-Pass Repair Weld Simulation", Journal of Pressure Vessels and Piping, 82, pp.244~257 (2005)
- Material Reliability Program : Welding residual and operating stresses in PWR alloy 182 butt welds, "EPRI", ~, pp.MRP-106 (2004)
- Fox, M., "An Overview of Intergranular Corrosion Cracking in BWRs", Journal of Materials in Energy System, 1, pp.3~ (1979)
- 김종성, "용접 구조물의 사용중 적합성 평가를 위한 잔류응력 해석절차 개발", 대한기계학회논문집 A, 27(5), pp.713~723 (2003), 대한기계학회
- Limpus, C.R., "Effect of Size of Butt Weld Repaires on Weld Overlay Residual Stresses", Trans. of ASMEPVP Conference (2007)
- Okimura, K., "Reliability of Water Jet Peening as Residual Stress Improvement Method for Alloy 600 PWSCC mitigation", Proceedings of the 16th International Conference on Nuclear Engineering (2008)
- 송태광, "동종금속용접이 이종금속용접부 잔류응력에 미치는 영향 평가 시 안전단 길이에 따른 효과", 대한기계학회논문집 A, 33(7), pp.664~672 (2009), 대한기계학회
- 김윤재, "고리 원전 가압기 노즐 용접부 잔류응력 예측 시 안전단 고려가 이종 금속 용접부 잔류응력 분포에 미치는 영향", 대한기계학회논문집 A, 32(8), pp.668~677 (2008), 대한기계학회
- 김윤재, "원전 이종 금속 다층 용접부 잔류응력 예측을 위한 유한요소 변수 민감도 해석", 대한기계학회논문집 A, 32(9), pp.770~781 (2008), 대한기계학회
- Timoshenko, S., "Strength of Materials : Part II-Advanced Theory and Problems" (1956), D. Van Nostrand
- Tsuruta, T., "PWSCC of Nickel Base Alloys in Vapor Phase Environment of Pressurizer", Proceedings of the 16th International Conference on Nuclear Engineering (2008)
- Yaghi, A., "Residual Stress Simulation in Thin and Thick-Walled Stainless Steel Pipe Welds Including Pipe Diameter Effects", International Journal of Pressure Vessels and Piping, 83, pp.864~874 (2006)