포화상태에 놓인 C-Type 액체수소 탱크의 슬로싱이 열 유속과 BOG에 미치는 변화의 수치적 분석
Numerical Study of Heat Flux and BOG in C-Type Liquefied Hydrogen Tank under Sloshing Excitation at the Saturated State
0
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
본 논문은 슬로싱 상태에 놓인 포화 상태 액체수소탱크에서 열 유속 및 BOG(Boil-off gas)의 경향을 다루고 있다. 특히, 액체-기체 간의 침투 및 혼합에 의한 열 교환에 관심을 두었다. 먼저, VOF(Volume of fluid)와 Eulerian 기반의 다상 유동모델로 모형 슬로싱 실험을 모사하여 압력을 예측하고 계측된 값과 비교하였다. 자유 수면 및 충격 압력 실험 결과와 해석 결과를 비교하였으며, 유체의 속도 예측에서 정확할 수 있음을 간접적으로 증명하였다. 그리고 2차원의 Type-C 원통형 수소탱크를 대상으로 다상열유동해석을 수행하였다. 이때 포화상태에 놓인 액체 및 기체수소를 가정하고, 해석을 통해 각 상간의 혼합에 의한 열 교환의 수준을 확인하고자 하였다. 단, 상간의 열 교환만을 관심으로 두고 있었으므로 질량전달 및 기화모델은 해석에서 제외하였다. 최종적으로 상의 혼합으로 인해 액체수소로 유입되는 열 유속의 기여도에 대하여 정리하였다. 또한 액체수소로 유입되는 열 유속과 집중 질량 기반의 간이식을 통해 BOG 발생량 및 경향을 예측하고 분석하였다.
Abstract
This study was conducted to predict the tendency for heat exchange and boil-off gas (BOG) in a liquefied hydrogen tank under sloshing excitation. First, athe fluid domain excited by sloshing was modeled using a multiphase-thermal flow domain in which liquid hydrogen and hydrogen gas are in the saturated state. Both the the volume of fluid (VOF) and Eulerian-based multi-phase flow methods were applied to validate the accuracy of the pressure prediction. Second, it was indirectly shown that the fluid velocity prediction could be accurate by comparing the free surface and impact pressure from the computational fluid dynamics with those from the experimental results. Thereafter, the heat ingress from the external convective heat flux was reflected on the outer surfaces of the hydrogen tank. Eulerian-based multiphase-heat flow analysis was performed for a two-dimensional Type-C cylindrical hydrogen tank under rotational sloshing motion, and an inflation technique was applied to transform the fluid domain into a computational grid model. The heat exchange and heat flux in the hydrogen liquid-gas mixture were calculated throughout the analysis,, whereas the mass transfer and vaporization models were excluded to account for the pure heat exchange between the liquid and gas in the saturated state. In addition, forced convective heat transfer by sloshing on the inner wall of the tank was not reflected so that the heat exchange in the multiphase flow of liquid and gas could only be considered. Finally, the effect of sloshing on the amount of heat exchange between liquid and gas hydrogen was discussed. Considering the heat ingress into liquid hydrogen according to the presence/absence of a sloshing excitation, the amount of heat flux and BOG were discussed for each filling ratio.
참고문헌 (26)
- Adom, E, "Modelling of Boil-offGas in LNG Tanks: A Case Study", Int. J. Eng. & Technol, 2, pp.292~296 (2010)
- Alkhaledi, A.N, "A Hydrogen Fuelled LH2 Tanker Ship Design", Ships & Offshore Struct, pp.1~10 (2021)
- Ansys Inc, "Fluent Theory Guide Release 2020" (2020), Ansys. Inc
- Two Phase Flow Models and Numerical Methods of the Commercial CFD Codes, "Bae, S.W", Korea Atomic Energy Research Institute, 16~36 (2007)
- Baker, C.R, "A Study of the Efficiency of Hydrogen Liquefaction", Int. J. Hydrog. Energy, 3(3), pp.321334~ (1978)
- Chandran, P, "Laminar Forced Convection from a Rotating Horizontal Cylinder in Cross Flow", J. Therm. Sci, 26(2), pp.153~159 (2017)
- Ferrin, J.L, "Numerical Simulation of Natural Convection and Boil-offin a Small Size Pressurized LNG Storage Tank", Comput. & Chem. Eng, 138, pp.106840~ (2020)
- 한원희, "수소에너지 기술 개발 현황과 선박적용 동향", 해양환경안전학회지, 16(3), pp.313~320 (2010), 해양환경안전학회
- 황세윤, "열전달 해석을 이용한 멤브레인형 LNG 화물창의 단열구조 성능비교", 한국전산구조공학회논문집, 29(1), pp.53~60 (2016), 한국전산구조공학회[DOI]
- Hwang, S. Y, "The Numerical Investigation of Structural Strength Assessment of LNG CCS by Sloshing Impacts Based on Multiphase Fluid Model", Appl. Sci, 11(16), pp.7414~ (2021)
- Jeon, G. M, "Multiphase-Thermal Simulation on BOG", BOR Estimation due to Phase Change in Cryogenic Liquid Storage Tanks, 2021, pp.184, 116264~
- Summary Report of Sloshing Model Test for Rectangular Model No.001, "Kang, D. H", Daewoo Shipbuilding and Marine Engineering Company, 2~7 (2005)
- Li, F, "A Study on a Numerical Simulation of the Leakage and Diffusion of Hydrogen in a Fuel Cell Ship", Renew. & Sustain. Energy Rev, 97, pp.177~185 (2018)
- Lin, Y, "An Approach to Estimating the Boil-offRate of LNG in Type C Independent Tank for Floating Storage and Regasification Unit under Different Filling Ratio", Appl. Therm. Eng, 135, pp.463~471 (2018)
- Liu, Z, "Dynamic Variation of Interface Shape in a Liquid Oxygen Tank under a Sinusoidal Sloshing Excitation", Ocean Eng, 213, pp.107637~ (2020)
- Mao, X, "Simulation and Analysis of Hydrogen Leakage and Explosion behaviors in Various Compartments on a Hydrogen Fuel Cell Ship", Int. J. Hydrog. Energy, 46, pp.6857~6872 (2021)
- 박수현, "슬로싱 유동에 대한 2유체 방법과 VOF 방법의 비교 연구", 대한기계학회논문집 B, 44(12), pp.711~716 (2020), 대한기계학회
- Saleem, A, "A CFD Simulation Study of Boiling Mechanism and BOG Generation in a Full-Scale LNG Storage Tank", Comput. & Chem. Eng, 115, pp.112~120 (2018)
- Scheufler, H, "Heat and Mass Transfer in a Cryogenic Tank in Case of Active-Pressurization", Cryog, 121, pp.103391~ (2022)
- Smith, J.R, "Modelling of Boil-offand Sloshing Relevant to Future Liquid Hydrogen Carriers", Energies, 15(6), pp.2046~ (2022)
- Syed, M. T, "An Economic Analysis of three Hydrogen Liquefaction Systems", Int. J. Hydrog. Energy, 23(7), pp.565~576 (1998)
- Tani, K, "CFD Simulation of Pressure Reduction inside Large-Scale Liquefied Hydrogen Tank", Int. Conf. Hydrogen Safety (2021)
- Vishnu, S.B, "Mathematical Modeling of Thermal Stratification in a Double Wall Cryogenic Propellant Tank With Different Insulations using One-Dimensional Flow over Vertical Plate Approximation", Cryogenics, 121, pp.103393~ (2022)
- Wu, S, "Numerical Study of the Boil-offGas(BOG)Generation Characteristics in a Type C Independent Liquefied Natural Gas (LNG) Tank under Sloshing Excitation", Energy, 223, pp.120001~ (2021)
- Yu, K, "CFD Predictions of FLNG BOG Including the Influence of Filling, Offloading, and Vessel Motion", Offshore Technology Conference (2016)
- Zakaria, M. S, "Computational Simulation of Boil-offGas Formation inside Liquefied Natural Gas Tank using Evaporation Model in Ansys Fluent", Appl. Mech. &Mater, 393, pp.839~844 (2013)