멀티 버너 중유 연소로에서의 합성 가스 혼합 연소 특성 연구
A Study on Syngas Co-combustion Characteristics in a Heavy Oil Combustion System with Multi Burners
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Co-combustion of syngas in an existing boiler can be one of the options for replacing conventional fossil fuel with alternative fuels such as waste and biomass. This study is aimed to investigate effects of syngas cocombustion on combustion characteristics and boiler efficiency. An experimental study was performed for a pilot-scale furnace with 4 oil burners. Tests were conducted with mixture-gas as a co-combustion fuel and heavy oil as a main fuel. The mixture-gas was composed of 15% CO, 7% H2, 3% CH4 and 75% N2 for simulating syngas from air-blown gasification. And LHV of the mixture-gas was 890 kcal/Nm3. Temperature distribution in the furnace and flue gas composition were measured for various heat replacement ratio by the mixture gas. Heat loss through the wall was also carried out through heat & mass balance calculation, in order to obtain informations related to boiler efficiency. Experimental results show that similar temperature distribution and flue gas composition can be obtained for the range of 0～20% heat replacement by syngas. NOx concentration is slightly decreased for higher heat replacement by the syngas because fuel NOx is decreased in the case. Meanwhile, heat loss is a bit decreased for higher heat replacement by the syngas, which implies that boiler efficiency can be a bit decreased when syngas co-combustion is applied to a boiler.
Abstract
Co-combustion of syngas in an existing boiler can be one of the options for replacing conventional fossil fuel with alternative fuels such as waste and biomass. This study is aimed to investigate effects of syngas cocombustion on combustion characteristics and boiler efficiency. An experimental study was performed for a pilot-scale furnace with 4 oil burners. Tests were conducted with mixture-gas as a co-combustion fuel and heavy oil as a main fuel. The mixture-gas was composed of 15% CO, 7% H2, 3% CH4 and 75% N2 for simulating syngas from air-blown gasification. And LHV of the mixture-gas was 890 kcal/Nm3. Temperature distribution in the furnace and flue gas composition were measured for various heat replacement ratio by the mixture gas. Heat loss through the wall was also carried out through heat & mass balance calculation, in order to obtain informations related to boiler efficiency. Experimental results show that similar temperature distribution and flue gas composition can be obtained for the range of 0～20% heat replacement by syngas. NOx concentration is slightly decreased for higher heat replacement by the syngas because fuel NOx is decreased in the case. Meanwhile, heat loss is a bit decreased for higher heat replacement by the syngas, which implies that boiler efficiency can be a bit decreased when syngas co-combustion is applied to a boiler.
참고문헌 (10)
- Sheng Su, "Application of gaseous fuel reburning for controlling nitric oxide emissions in boilers", Fuel Processing Technology, 90(3), pp.396~402 (2009)
- Sen Li, "Optimization of coal reburning in a 1 MW tangentially fired furnace", Fuel,, 86, pp.1169~1175 (2007)
- K. -T. Wu, "Study of syngas co-firing and reburning in a coal fired boiler", Fuel,, 83, pp.1991~2000 (2004)
- 이현동, "시험연소로를 이용한 석탄-바이오매스 혼소 특성 평가", 한국폐기물학회,춘계학술연구회발표논문집, pp.404~407 (2005)
- 김우현, "유동층 연소로에서 하수슬러지와 RDF의 혼합연소특성", 한국폐기물학회지,추계학술연구회발표논문집, pp.573~576 (2004)
- 엄태인, "개질 가스연료와 LPG 혼합 연소 특성의 실험적 연구", 한국폐기물자원순환학회지, 24(5), pp.454~459 (2007), 한국폐기물자원순환학회
- K.Ichikawa, "R&D of Carbonizing Gasification for Biomass", Waste, 2007, ~
- 양동진, "1MW급 중유 멀티 버너 시스템에서의 합성 가스 혼합 연소에 따른 연소 특성 파악", 제 39회 KOSCO SYMPOSIUM 논문집, pp.51~56 (2009)
- 최신영, "1 ton steam", hr 수관식 보일러에서의 합성가스 혼합 연소 특성 연구, 2009, 57~61
- 최신영, "저급 연료 합성가스의 보일러 혼합 연소를 위한 기초연구", 제 37회 KOSCO SYMPOSIUM 논문집, pp.57~61 (2008)