로터리킬른 화염 및 열전달 모형 - 연료에 따른 열 성능 분석 사례
Rotary Kiln Flame and Heat Transfer Model - Analysis of Thermal Performance according to Fuel
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
This paper is to suggest a simple flame model for the analysis of an internal flame of rotary kilns and to present the application cases. Reaction rates in the multi combustion stages of the selected solid fuel were calculated considering the reaction rates with the Arrhenius type equations. In addition, primary and secondary air flow arrangement were considered. As a simple application case, the combustion trends according to the different solid fuels were described. Improved operating conditions as related with the fuel characteristics were shown to be important for the stable combustion characteristics and the performance of the reactors as defined by the exit temperature of the solid materials.
Abstract
This paper is to suggest a simple flame model for the analysis of an internal flame of rotary kilns and to present the application cases. Reaction rates in the multi combustion stages of the selected solid fuel were calculated considering the reaction rates with the Arrhenius type equations. In addition, primary and secondary air flow arrangement were considered. As a simple application case, the combustion trends according to the different solid fuels were described. Improved operating conditions as related with the fuel characteristics were shown to be important for the stable combustion characteristics and the performance of the reactors as defined by the exit temperature of the solid materials.
참고문헌 (17)
- A. S. Mujumdar, "Handbook of Industrial Drying" (2006), Taylor & Francis
- 하대승, "고체 고온공정에서 효율적 에너지 관리 - (1) 공정 열정산 및 평가 방법", 한국연소학회지, 21(1), pp.18~30 (2016), 한국연소학회[DOI]
- K.S. Mujumdar, "Simulation of Rotary Cement Kilns Using a One-dimensional Model", Chem. Eng. Research and Design., 84(A3), pp.165~177 (2006)
- J.P. Gorog, "Regenerative Heat Transfer in Rotary Kilns", Metallurgical Transactions., 13B, pp.153~163 (1982)
- 엄태규, "석탄의 고품위화를 위한 기류건조기와 로터리킬른 건조기의 성능 비교평가", 한국연소학회지, 20(2), pp.1~13 (2015), 한국연소학회[DOI]
- 엄민제, "로터리킬른 반응기 설계를 위한 성능해석 모형", 한국연소학회지, 18(3), pp.9~23 (2013), 한국연소학회
- H.K. Lee, "The Performance Evaluation of The Rotary Kiln: Stepwise Dimensional Model and Case Analysis", The 47th KOSCO symposium, pp.33~34 (2013)
- D.S. Ha, "The Performance Evaluation of The Rotary Kiln: One-dimensional Model Considering The Heat Transfer Through The Inner Wall", The 47th KOSCO symposium, pp.89~90 (2013)
- T.G. Eom, "The Performance Evaluation of Staged Cyclones and Rotary Kiln Calciner", The 50th KOSCO symposium, pp.249~252 (2015)
- J.I. Yang, "A Dynamic Performance Prediction Model for a Circulating Fluidized Bed Boiler", Master, pp.2013
- W.P. Jones, "Global Reaction Schemes for Hydrocarbon Combustion", Combust. Flame., 73, pp.233~249 (1988)
- D.R. Vandervaart, "The Chemistry of Premixed Hydrocarbon", Air Combustion in a Fluidized Bed, 1988, pp.71, 35~39
- I.W. Smith, "The Combustion Rates of Coal Chars:A Review", The 19th International Symposium on Combustion, pp.1045~1065 (1975), The Combust. Insti.
- A.A. Boateng, "Rotary Kilns: Transpoert Phenomena and Transport Processes" (2008), Butterworth-Heinemann
- S.H. Tscheng, "Convective Heat Transfer in a Rotary Kiln", Can. J. Chem. Eng., 57, pp.433~443 (1979)
- H.H. Smith, "FURNACE-TYPE LUMBER DRY KILN Operation of an Experimental Unit", US Dept. of Agriculture, Forest Service, Forest Products Laboratory, ~ (1945)
- G. K. Gaurav, "Analysis of Temperature Profile and% Metallization in Rotary Kiln of Sponge Iron Process through CFD", J. Taiwan Inst. Chem. Eng., 63, pp.473~481 (2016)