발전용 가스터빈 대상 유연운전 실증사례 연구 (가스터빈과 스팀터빈 부하연계 부분)
Case Study on Flexible Operation of Combined Cycle Power Plant
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
Based on global environmental awareness and international agreements (Paris, and Tokyo), individual countries have set CO2 reduction plans and are pursuing policies to increase the proportion of renewable energy. Ultimately, there is a technical need for a flexible operation in the field of power generation aiming at the carbon free energy consumption stage. In particular, gas turbines among existing power generation facilities have been attracting much attention for flexible operation due to load fluctuation rate and quick starting characteristics. In terms of flexible operation, the issue of limiting the power output in response to a sudden changed load in a gas turbine has been examined. In case of gas turbine, it is necessary to operate in conjunction with steam turbines having different dynamic characteristics in order to improve the efficiency. In the case of IP steam, some are used for cooling the gas turbine combustor, so there are many aspects to be considered in terms of control for system protection. To solve this problem, IP(Intermediate Pressure) steam control valve malfunction was prevented by parameter change for IP steam pressure control, and demonstration with this parameter was completed. In addition, a TIT(Turbine Inlet Temperature) prediction scheme was also considered to control the cooling flow to the combustor for IP steam pressure control in case of greater load fluctuations due to system requirements.
Abstract
Based on global environmental awareness and international agreements (Paris, and Tokyo), individual countries have set CO2 reduction plans and are pursuing policies to increase the proportion of renewable energy. Ultimately, there is a technical need for a flexible operation in the field of power generation aiming at the carbon free energy consumption stage. In particular, gas turbines among existing power generation facilities have been attracting much attention for flexible operation due to load fluctuation rate and quick starting characteristics. In terms of flexible operation, the issue of limiting the power output in response to a sudden changed load in a gas turbine has been examined. In case of gas turbine, it is necessary to operate in conjunction with steam turbines having different dynamic characteristics in order to improve the efficiency. In the case of IP steam, some are used for cooling the gas turbine combustor, so there are many aspects to be considered in terms of control for system protection. To solve this problem, IP(Intermediate Pressure) steam control valve malfunction was prevented by parameter change for IP steam pressure control, and demonstration with this parameter was completed. In addition, a TIT(Turbine Inlet Temperature) prediction scheme was also considered to control the cooling flow to the combustor for IP steam pressure control in case of greater load fluctuations due to system requirements.
참고문헌 (12)
- "Paris Agreement (French: Accord de Paris) is an agreement within the United Nations Framework Convention on Climate Change (UNFCCC)", ~ (2016)
- An innovation agenda for deep decarbonization: bridging gaps in the federal energy RD&D portfolio, "Colin Cunliff", ~ (2018)
- Overgeneration from solar energy in california: a field guide to the duck chart, "NREL", ~, pp.NREL (2015), TP-6A20-65023
- "Wind and solar energy curtailment: A review of international experience", renewable and sustainable energy reviews, 65, pp.577~586 (2016)
- "General electric to scrap california power plant 20years early" (2019)[URL]
- Flexible operations and heat rate, , EPRI, ~, pp.technical report 3002013992 (2018)
- Seik Park, "Demonstration of a gas turbine combustion-tuning method and sensitivity analysis of the combustiontuning parameters with regard to NOx emissions", Fuel, 239, pp.1134~1142 (2019)
- Novel method to predict non-measured parameters of industial gas turbines using kalman filter technique, "Jae Hong Lee", ~, pp.GT2019-90558 (2019)
- A review of exhaust gas temperature sensing techniques for modern turbine engine controls, "Alexander Von Moll", AIAA, ~ (2014)
- C.C. Pilgrim, "Surface temperature measurements in an industrial gas turbine using thermal history paints", ETC12 (2017)
- Seik Park, "Validation of measured data on F", A ratio and turbine inlet temperature with optimal estimation to enhance the reliability on a full-scale gas turbine combustion test for IGCC, 2019, pp.44, 13999~14011
- Kim Chan-Soo, "Temperature measurement with radiation correction for very high temperature gas", IHTC14, pp.23074~ (2010)