스월-예혼합 버너의 출구 형상 변화에 따른 연소 특성 분석
Investigation on the Effect of the Burner Outlet Configuration on the Combustion Characteristics of a Swirl-premixed Burner
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
This study investigated the effect of the outer recirculation zone(ORZ) on the combustion characteristics and NOX emissions. Numerical simulation and experimental test were conducted for the combustors with two types of the burner outlet. The ORZ is formed conspicuously for a flat type with sudden expansion outlet while it is formed in a negligible size for a curved type with gradual expansion outlet. In a higher adiabatic flame temperature(AFT) condition of 2020 K, the NOX emission of the flat type is increased by 19% compared with the curved type as the ORZ has long residence time and high temperature enough to produce the thermal NOX. On the other hand, the NOX emission of the flat type is decreased slightly in a lower AFT of 1850 K as the temperature of the ORZ is not high enough to significantly produce the thermal NOX. The tendency of the calculated NOX emission is consistent with the experiment results.
Abstract
This study investigated the effect of the outer recirculation zone(ORZ) on the combustion characteristics and NOX emissions. Numerical simulation and experimental test were conducted for the combustors with two types of the burner outlet. The ORZ is formed conspicuously for a flat type with sudden expansion outlet while it is formed in a negligible size for a curved type with gradual expansion outlet. In a higher adiabatic flame temperature(AFT) condition of 2020 K, the NOX emission of the flat type is increased by 19% compared with the curved type as the ORZ has long residence time and high temperature enough to produce the thermal NOX. On the other hand, the NOX emission of the flat type is decreased slightly in a lower AFT of 1850 K as the temperature of the ORZ is not high enough to significantly produce the thermal NOX. The tendency of the calculated NOX emission is consistent with the experiment results.
참고문헌 (29)
- The 8th basic plane of long-term electricity supply and demand, , Ministry of Trade Industry and Energy, ~ (2017)
- The technical level and global market trend analysis of gas turbines for power generation, R&D report, "J.R. Son", Korea Institute of Energy Technology Evaluation and Planning, ~ (2018)
- 조주현, "LNG발전소 건설 및 운영에 따른 유발효과분석", 에너지경제연구, 17(1), pp.265~286 (2018), 재단법인 에너지경제연구원[DOI]
- "Enforcement rule of the clean air conservation act"[URL]
- S.R. Turns, "An Introduction to Combustion: Concepts and Applications" (2012), McGraw-Hill Education
- A.H. Lefebvre, "Gas Turbine Combustion" (2010), CRC Press
- "Dry low NOX 2.6+ combustion system 9FA", 9FB gas turbines, 2016
- A. Kundu, "Combustion characteristics of a swirl dry low emission burner concept for gas turbine application", Ph. D, pp.2016
- S. Fukuba, "Experimental and numerical investigation of DLN combustion for a heavy duty gas turbine", GPPF, 165 (2017)
- W. Hubschmid, "Thermoacoustically driven flame motion and heat release variation in a swirl-stabilized gas turbine burner investigated by LIF and chemiluminescence", Exp. Fluids, 45, pp.167~182 (2008)
- R. K. Bompelly, "Lean blowout and its robust sensing in swirl combustors", Ph. D, pp.2013
- T. Gassoumi, "Numerical study of the swirl effect on a coaxial jet combustor flame including radiative heat transfer", Numer. Heat Transfer. Part A, 56, pp.897~913 (2009)
- Y.A. Cengel, "Fluid Mechanics :Fundamentals and applications" (2013), McGraw-Hill Higher Education
- J.P. Miranda, "Local loss coefficient in sudden expansion laminar flows of inelastic shear thinning fluids", COBEM (2003)
- F. Biagioli, "Effect of pressure and fuel-air unmixedness on NOX emissions from industrial gas turbine burners", Combust. Flame, 151, pp.274~288 (2007)
- R.K. Mongia, "Use of an optical probe for time-resolved in situ measurement of local air-to-fuel ration and extent of fuel mixing with applications to low NOX emissions in premixed gas turbines", Symposium on Combustion, 26, pp.2749~2755 (1996)
- C. H. Cho, "A numerical approach to reduction of NOX emission from swirl premix burner in a gas turbine combustor", Appl. Therm. Eng, 59, pp.454~463 (2013)
- S. Li, "LES of swirl angle on combustion dynamic and NOx formation in a hybrid industrial combustor", IJHT, 34, pp.197~206 (2016)
- D.C. Kim, "Characteristics of NOx emission with various furnace diameter of premixed swirl burner", Symposium on Korean Soc. Combus., 38 (2009)
- 주해지, "마이크로 가스터빈용 연소기 설계를 위한 GUI 프로그램 개발", 대한기계학회논문집 B, 42(12), pp.833~841 (2018), 대한기계학회
- J. M. Beer, "Combustion Aerodynamics" (1972), Applied Science Publishers
- "ANSYS Fluent User’s Guide, v17.2", ~ (2017)
- "GRI 1.2" (1994)[URL]
- 차천륜, "Cross flow Micro-mix 방식을 이용한 수소 가스터빈 연소기 연소특성에 대한 수치해석적 연구", 한국연소학회지, 24(3), pp.17~25 (2019), 한국연소학회[DOI]
- H. Jia, "Ignition of CH4 intensely diluted with N2 and CO2versus hot air in a counterflow jets", Energy, 165, pp.315~325 (2018)
- J. P. Bouchez, "Impingement cooling from a circular jet in a cross flow", Int. J. Heat Mass Transfer, 18, pp.719~730 (1975)
- T. Cai, "Flame dynamics and stability of premixed methane", air in micro-planar quartz combustor, 2020, pp.193, 116767~
- D. G. Nortom, "Combustion characteristics and flame stability at the microscale : a CFD study of premixed methane", air mixtures, 2003, pp.58, 4871~4882
- S. Mohammadnejad, "Internal structure of hydrogen-enriched methane-air turbulent premixed flames : flamelet and non-flamelet behavior", Combust. Flame, 208, pp.139~157 (2019)