동축류 마일드 연소기를 적용한 마일드 연소 형성 연구
Formation of MILD Combustion using Co-flow MILD Combustor
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
MILD combustion was first developed to suppress thermal NOx formation in combustor for heating industrial furnaces. In this paper, the effect of co-flow MILD combustor geometry and operating conditions on the formation of MILD combustion was analyzed using 3 dimensional numerical simulation. The numerical simulations were carried out using ANSYS Fluent. The combustion and turbulence flow was modeled using the Eddy Dissipation Concept(EDC) model and realizable k-ε model respectively. The results show that the high temperature region and average temperature decreased due to an increase in the air velocity and decrease the wall thickness of fuel nozzle. In particular, the MILD combustion flame was found to be stable with a combustion flame region at fuel velocity 10 m/s, air velocity 20 m/s, fuel nozzle thickness 1.0 mm, equivalence ratio 0.9, and outlet area ratio 40%.
Abstract
MILD combustion was first developed to suppress thermal NOx formation in combustor for heating industrial furnaces. In this paper, the effect of co-flow MILD combustor geometry and operating conditions on the formation of MILD combustion was analyzed using 3 dimensional numerical simulation. The numerical simulations were carried out using ANSYS Fluent. The combustion and turbulence flow was modeled using the Eddy Dissipation Concept(EDC) model and realizable k-ε model respectively. The results show that the high temperature region and average temperature decreased due to an increase in the air velocity and decrease the wall thickness of fuel nozzle. In particular, the MILD combustion flame was found to be stable with a combustion flame region at fuel velocity 10 m/s, air velocity 20 m/s, fuel nozzle thickness 1.0 mm, equivalence ratio 0.9, and outlet area ratio 40%.
참고문헌 (16)
- Turns, S. R., "An Introduction to Combustion" (2000), McGraw Hill
- C. K. Law, "Combustion Physics" (2006), Cambridge University Press
- P. H. Lee, "Formation of Lean Premixed Surface Flame Using Porous Baffle Plate and Flame Holder", J. Therm. Sci. Tech, 8, pp.178~189 (2013)
- P. H. Lee, "Combustion 2016", ~ (2016)
- 최윤기, "시험용 연소로에서의 다단 저 NOx 버너의 실험 및 수치적 연구", 대한기계학회논문집 B, 28(11), pp.1339~1347 (2004), 대한기계학회
- M. W. Kang, "The effect of flue-gas recirculation on combustion characteristics of regenerative low NOx burner", The 25th KOSCO Symposium, pp.97~104 (2002)
- G. M. Choi, "Advanced Low Nox Combustion Using Highly Preheating Air", Energy Convers Manage, 42, pp.639~652 (2001)
- P. Li, "MILD oxy combustion of gaseous fuels in a laboratory scale furnace", Combust. Flame, 160, pp.93~946 (2013)
- J. Leicher, "Flameless Oxidation as a means to Reduce NOx Emissions in Glass Melting Furnaces", Int. J. of Thermodynamics, 16(2), pp.55~61 (2013)
- 이필형, "가동조건 변화에 따른 순산소 마일드 연소 형성 연구", 대한기계학회논문집 B, 40(9), pp.577~587 (2016), 대한기계학회
- A. Cavaliere, "Mild Combustion", Prog Energy Combust Sci, 30, pp.329~366 (2004)
- K. Arghode, "Effect of flow field for colorless distributed combustion(CDC)for gas turbine combustion", Appl Energy, 87, pp.1631~1640 (2010)
- Fluent, "Fluent 6.0", ~ (2002)
- S. E. Hosseini, "Investigation of bluff-body micro-flameless combustion", Energy Convers Manage, 88, pp.120~128 (2014)
- A. Parente, "Effect of the combustion model and kinetic mechanism on the MILD combustion in an industrial burner fed with hydrogen enriched fuels", Int. J. Hydrogen Energy, 33, pp.7553~7564 (2008)
- GRI-Mech–An Optimized Detailed Chemical Reaction Mechanism for Methane Combustion, "M. Frenklach", Gas Research Institute Topic, ~, pp.Report GRI-95 (1995), 0058