NOx저감을 위한 연료희박 재연소 기법의 실험 및 수치적 연구
Experimental and Numerical Investigation for NOx Reduction with Fuel Lean Reburning System
2
조회
0
다운로드
5
인용
0
참고문헌
키워드
초록
Fuel lean reburning method is very attractive way in comparison with conventional reburning method for reducing NOX. Meanwhile, the knowledge of the how flue gas re-circulated, temperature distribution and species concentration is crucial for the design and operation of an effective fuel lean reburning system. For this reason, numerical analysis of fuel lean reburning system is a very important and challenge task. In this work, the effect of fuel lean reburn system on NOX reduction has been experimentally and numerically conducted. Experimental study has been conducted with a 15kW lab scale furnace. Liquefied Petroleum Gas is used as main fuel and reburn fuel. To carry out numerical study, the finite-volume based commercial computational fluid dynamics (CFD) code FLUENT6.3 was used to simulate the reacting flow in a given laboratory furnace. Steady state, three dimensional analysis performed for turbulent reactive flow and radiative heat transfer in the furnace.
Abstract
Fuel lean reburning method is very attractive way in comparison with conventional reburning method for reducing NOX. Meanwhile, the knowledge of the how flue gas re-circulated, temperature distribution and species concentration is crucial for the design and operation of an effective fuel lean reburning system. For this reason, numerical analysis of fuel lean reburning system is a very important and challenge task. In this work, the effect of fuel lean reburn system on NOX reduction has been experimentally and numerically conducted. Experimental study has been conducted with a 15kW lab scale furnace. Liquefied Petroleum Gas is used as main fuel and reburn fuel. To carry out numerical study, the finite-volume based commercial computational fluid dynamics (CFD) code FLUENT6.3 was used to simulate the reacting flow in a given laboratory furnace. Steady state, three dimensional analysis performed for turbulent reactive flow and radiative heat transfer in the furnace.
참고문헌 (9)
- Zeldovich, Y. B., "The oxidation of nitrogen in combustion and explosions", Acta Physicochim. URSS, 21(4), pp.577~628 (1946)
- Folsom, B. A., "Demonstration of combined NOx and SO2 emission control technologies involving gas reburning", International Conference on Environmental Control of Combustion Process (1991)
- Frederiksen, R., "Fuel Lean Gas Reburn (FLGRTM) Technology for Achieving NOx Emissions Compliance: Application to a Tangentially-Fired Boiler", Joint-American, 1998, ~
- Lei-Yong Jiang, "A critical evaluation of NOx modeling in a model combustor", Journal of Engineering for Gas Turbines and Power, 127, pp.483~491 (2005)
- Mustafa Ilbas, "The effect of thermal radiation and radiation models on hydrogen-hydrocarbon combustion modeling", International Journal of Hydrogen Energy, 30, pp.1113~1126 (2005)
- Fassoldati, A.a, "Determination of NOx emission from strong swirling confined flames with an integration CFD-based procedure", Chemical Engineering Science, 60(11), pp.2851~2869 (2005)
- Gupta, A. K., "Swirl Flows", Abacus, Inc (1984)
- "Fluent mannual 6.3", ~, pp.지침서
- Hayhurst, A. N., "Does solid carbon burn in oxygen to give the gaseous intermediate CO or produce CO2 directly? Some experiments in a hot bed of sand fluidized by air", Chemical Engineering Science, 53(3), pp.427~438 (1998)