평판 예혼합 세라믹 버너의 분포판 변화에 따른 연소화염특성과 안정성 분석
Combustion Characteristic and Stability of Flat Premixed Ceramic Burner with Different Porous Baffle Plates
1
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
Porous metal plates (Metal fiber, muti-hole metal plate) using mainly in surface burner are known to have a corrosion and durability problem under high temperature condition. In this study, premixed flat flame with perforated ceramic tile of more durable cordierite material was examined with respect to combustion stability and emission. The flat premixed ceramic burner consists of perforated ceramic tile and various type of baffle plates to form stable surface flame. The results show that most stable flat flame is generated using baffle plate with open ratio of 0.193. In downward flat flame mode which is widely used in condensing boiler, CO is measured below 50ppm from equivalence ratio 0.755 to 0.765 and NOX is measured below 12ppm from equivalence ratio 0.75 to 0.79. It is also found that the range of blue flame in flame stability curve becomes wider with increasing heat capacity.
Abstract
Porous metal plates (Metal fiber, muti-hole metal plate) using mainly in surface burner are known to have a corrosion and durability problem under high temperature condition. In this study, premixed flat flame with perforated ceramic tile of more durable cordierite material was examined with respect to combustion stability and emission. The flat premixed ceramic burner consists of perforated ceramic tile and various type of baffle plates to form stable surface flame. The results show that most stable flat flame is generated using baffle plate with open ratio of 0.193. In downward flat flame mode which is widely used in condensing boiler, CO is measured below 50ppm from equivalence ratio 0.755 to 0.765 and NOX is measured below 12ppm from equivalence ratio 0.75 to 0.79. It is also found that the range of blue flame in flame stability curve becomes wider with increasing heat capacity.
참고문헌 (9)
- "에너지 절약형 친환경 주택 건설기준 마련", 국토해양부 보도자료, ~ (2009)
- 조은성, "고효율 저공해 보일러 개발을 위한 평판형 예혼합 버너 특성 연구", 한국에너지공학회 추계 학술발표회, pp.216~221 (2007)
- J.R. Howell, "COMBUSTION OF HYDROCARBON FUELS WITHIN POROUS INERT MEDIA", Prog. Energy Combust. Sci, 22, pp.121~145 (1996)
- 이창언, "저 Nox 응축형 가스보일러 개발에 관한 연구 (I)", 대한기계학회논문집 B, 25(2), pp.235~243 (2001), 대한기계학회
- 박주원, "메탈 화이버 버너에서의 연소 특성 및 복사 효율에 관한 실험적 연구", 한국연소학회지, 11(1), pp.27~33 (2006), 한국연소학회
- 임인권, "다공 세라믹 연소기 속에서의 예혼합연소에 대한 민감도 해석의 적용", 대한기계학회논문집 B권, 22(2), pp.162~172 (1998)
- Pil Hyong Lee, "원통형 다공철판버너의 염공변화에 따른 평면 예혼합 연소특성", 대한기계학회 춘계학술대회 논문집, pp.332~335 (2009)
- 양시원, "Perforated Cordierite 재질 버너의 화염 형태 및 안정성 특성", 한국연소학회지, 10(1), pp.7~12 (2005), 한국연소학회
- Stephen R. Turns., "An Introduction to Combustion concepts and Applications"