세라믹 열교환기의 성능평가를 위한 실험적 연구
An experimental study for performance evaluation of a ceramic heat exchanger
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Exhaust gas of an industrial furnace used at such as metallurgy or ceramic manufacturing usually contains thermal energy with high temperature which can be recycled by heat exchanger. However, when the temperature of the exhaust gas is high such as more than 1000℃, ordinary metallic heat exchanger cannot fully recover the heat due to the limitation of operating temperature depending on the material property. In the present study, a compact ceramic heat exchanger of cross flow type is introduced and evaluated by heat exchange rate and operating temperature. The ceramic heat exchanger can endure the gas temperature more than 1300℃, and its volumetric heat exchanging rate exceeds 1MW/m3. The experimental data is also compared with the previous numerical result which shows reasonable agreement. Meanwhile, the gas leakage rate is measured to be about 3~4%, and heat loss to environmental air is about 23~26% of the fuel energy.
Abstract
Exhaust gas of an industrial furnace used at such as metallurgy or ceramic manufacturing usually contains thermal energy with high temperature which can be recycled by heat exchanger. However, when the temperature of the exhaust gas is high such as more than 1000℃, ordinary metallic heat exchanger cannot fully recover the heat due to the limitation of operating temperature depending on the material property. In the present study, a compact ceramic heat exchanger of cross flow type is introduced and evaluated by heat exchange rate and operating temperature. The ceramic heat exchanger can endure the gas temperature more than 1300℃, and its volumetric heat exchanging rate exceeds 1MW/m3. The experimental data is also compared with the previous numerical result which shows reasonable agreement. Meanwhile, the gas leakage rate is measured to be about 3~4%, and heat loss to environmental air is about 23~26% of the fuel energy.
참고문헌 (10)
- 박용환, "BOX형 세라믹 열교환기 코아의 열전달 및 열응력해석", 대한기계학회지, 2(1), pp.271~276 (1994)
- Alm, B., "Testing and simulation of ceramic micro heat exchanger", Chemical Engineering Journal, 135, pp.179~184 (2008)
- Smyth, R, "The use of high temperature heat exchangers to increase power plant thermal efficiency", Article No. 97089. Energy Conversion Engineering Conference, pp.1690~1695 (1997)
- Sommers, A., "Ceramics and ceramic matrix composites for heat exchangers in advanced thermal systems-A review", Applied Thermal Engineering, 30, pp.1277~1291 (2010)
- 박경서, "고온용 세라믹 열교환기 설계를 위한 수치 연구", 한국연소학회지, 14(3), pp.24~28 (2009), 한국연소학회
- 고신뢰성 고온용 판형 탄화규소 열교환기 기술개발, 원천소재 기술개발사업 최종보고서, "KIST", 지식경제부, ~ (2010)
- Cengel, Y. A., "Introduction to Thermo dynamics & Heat Transfer", pp.224~ (1997), McGraw Hill Higher Education
- White, F. M., "Heat Trasfer", pp.347~ (1989), Addison Wesley
- Cengel, Y. A., "Introduction to Thermo dynamics & Heat Transfer", pp.230~ (1997), McGraw Hill Higher Education
- Cengel, Y. A., "Introduction to Thermo dynamics & Heat Transfer", pp.221~ (1997), McGraw Hill Higher Education