혼합 액체 연료인 항공유의 점화지연시간 측정에 관한 연구
Measurement of Ignition Delay Time of Jet Aviation Fuel
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Jet aviation fuel is one of liquid fuel which are used in aircraft engines. Korean domestic jet fuel, called Jet A-1, is tested for measurement of ignition delay time by using a shock tube manufactured recently. The temperature varies from 680 to 1250 K and the pressure and equivalence ratio of Jet A-1/air are fixed 20 atm and 1.0, respectively, for this experiment. The ignition delay time data of Jet A-1 are compared with those of Jet A, which has similar properties to Jet A-1. The behavior of negative-temperature-coefficient (NTC) is observed in the temperature range 750-900 K. In addition, ignition delay time of iso-octane is measured, which is one of the surrogate components for jet aviation fuel. The experimental data are compared and validated with the previous results from the literatures. A surrogate fuel for the present Jet A-1 consists of 45.2% n-dodecane, 32.1% iso-octane, and 22.7% 1,3,5-trimethylbenzene. The predicted ignition delay time for the surrogate agrees well with the measured one for Jet A-1.
Abstract
Jet aviation fuel is one of liquid fuel which are used in aircraft engines. Korean domestic jet fuel, called Jet A-1, is tested for measurement of ignition delay time by using a shock tube manufactured recently. The temperature varies from 680 to 1250 K and the pressure and equivalence ratio of Jet A-1/air are fixed 20 atm and 1.0, respectively, for this experiment. The ignition delay time data of Jet A-1 are compared with those of Jet A, which has similar properties to Jet A-1. The behavior of negative-temperature-coefficient (NTC) is observed in the temperature range 750-900 K. In addition, ignition delay time of iso-octane is measured, which is one of the surrogate components for jet aviation fuel. The experimental data are compared and validated with the previous results from the literatures. A surrogate fuel for the present Jet A-1 consists of 45.2% n-dodecane, 32.1% iso-octane, and 22.7% 1,3,5-trimethylbenzene. The predicted ignition delay time for the surrogate agrees well with the measured one for Jet A-1.
참고문헌 (22)
- "Coordinating Support of Fuels and Lubricant Research and Development (R&D) 2", Coordinating Research Council Inc., 1~144 (2004)
- S.R. Turns, "An introduction to combustion", pp.1~676 (2000), McGraw-Hill
- B.P. Mullins, "Development of a combustion test rig for measuring the ignition delay of fuels", Fuel, 32, pp.234~352 (1953)
- V.L. Zimont, "Ignition lag of hydrocarbon fuels at high temperatures", Combust. Explo. Shock Waves, 3, pp.51~56 (1967)
- F. Ducourneau, "Spontaneous combustion of rich air-kerosene mixtures", Entropie, 10, pp.11~18 (1974)
- L.J. Spadaccini, "Autoignition characteristics of aircraft-type fuels", Combust. Flame, 46, pp.282~300 (1982)
- C.P. Wood, "Development and application of a surrogate distillate fuel", J. Propul. Power, 5, pp.399~405 (1989)
- A.J. Dean, "Autoignition of surrogate fuels at elevated temperatures and pressures", Proc. Combust. Inst, 31, pp.2481~2488 (2007)
- S.S. Vasu, "Jet fuel ignition delay times: Shock tube experiments over wide conditions and surrogate model predictions", Combust. Flame, 152, pp.125~143 (2008)
- S. Dooley, "A jet fuel surrogate formulated by real fuel properties", Combust. Flame, 157, pp.2333~2339 (2010)
- H. Wang, "Autoignition studies of conventional and Fischer-Tropsch jet fuels", Fuel, 98, pp.249~258 (2012)
- S. Dooley, "The experimental evaluation of a methodology for surrogate fuel formulation to emulate gas phase combustion kinetic phenomena", Combust. Flame, 159, pp.1444~1466 (2012)
- H-P.S. Shen, "A shock tube study of iso-octane ignition at elevated pressures: The influence of diluent gases", Combust. Flame, 155, pp.739~355 (2008)
- D.F. Davidson, "Shock tube ignition measurements of iso-octane", air and toluene, Proc. Combust. Inst, pp.2005, 30[DOI]
- K. Fieweger, "Shocktube investigations on the self-ignition of hydrocarbon-air mixtures at high pressures", The 25th Combustion Institute Symposium, 25, pp.1579~1585 (1994)
- 한희선, "충격파관을 이용한 메탄", 산소 혼합기의 점화지연시간 측정, 2017, pp.22(1), 8~13[DOI]
- P. Dievart, "The combustion properties of 1,3,5-trimethylbenzene and a kinetic model", Fuel, 109, pp.125~136 (2013)
- S.S. Vasu, "n-Dodecane oxidation at high-pressures:Measurements of ignition delay times and OH concentration time-histories", Proc. Combust. Inst., 32, pp.173~180 (2009)
- H-P.S. Shen, "A Shock Tube Study of the Ignition of n-Heptane, n-Decane, n-Dodecane, and n-Tetradecane at Elevated Pressures", Energy Fuels, 23, pp.2482~2489 (2009)
- E.L. Petersen, "A facility for gas-and condensed-phase measurements behind shock waves", Meas. Sci. Technol., 16, pp.1716~1729 (2005)
- S. Downes, "Uncertainty Estimation of Shock Tube Pressure Steps", Proc. 21st IMEKO World Congress on Measurement in Research and Industy, pp.1~4 (2015)
- J.T. Herbon, "Shock Tube Measurements of CH3+O2 Kinetics and the Heat of Formation of the OH Radical", Ph.D., pp.2004