본문 바로가기
KERD
논문KCI 등재

탄소재료의 적용 방법에 따른 파티클 보드의 연소 특성

Evaluation of Fire Characteristics for Particle-board with Exfoliated Graphite Nanoplatelets Added

조정민|황욱|이민철|서현정
한국연소학회 (The Korean Society Of Combustion)|2017.12|한국연소학회지 (Journal of The Korean Society of Combustion)|제22권 제4호|pp. 1-8|DOI https://doi.org/10.15231/jksc.2017.22.4.001

0

조회

0

다운로드

3

인용

0

참고문헌

키워드

Fire safetyCone calorimeterWood-based materialsCarbon materials

초록

This study was conducted to evaluate the fire retardant performance of exfoliated graphite nanoplatelets (xGnP) applied for particleboard. This work measured heat release rate(HRR), total heat release(THR) and smoke production rate(SPR) of xGnP added particleboard, using cone calorimeter to assess its fire characteristics according to the KS F ISO 5660-1 standard code. Heat release rates of all specimens treated by xGnP were less than the 200 kW/m2 for a total experiment period of five minutes. Heat release rates of the specimens coated with xGnP were lower than those of the specimens made by mixing wood particles with xGnP directly. Meanwhile, the total heat release rates of xGnP coated specimen maintained quite lower level than the uncoated so the xGnP coating were effective in improving the fire retardant performance of particleboard. However, the smoke emission peaking problem at the initial combustion period, which was caused by adding base coating materials, should be resolved for further satisfaction as a fire retardant materials.

Abstract

This study was conducted to evaluate the fire retardant performance of exfoliated graphite nanoplatelets (xGnP) applied for particleboard. This work measured heat release rate(HRR), total heat release(THR) and smoke production rate(SPR) of xGnP added particleboard, using cone calorimeter to assess its fire characteristics according to the KS F ISO 5660-1 standard code. Heat release rates of all specimens treated by xGnP were less than the 200 kW/m2 for a total experiment period of five minutes. Heat release rates of the specimens coated with xGnP were lower than those of the specimens made by mixing wood particles with xGnP directly. Meanwhile, the total heat release rates of xGnP coated specimen maintained quite lower level than the uncoated so the xGnP coating were effective in improving the fire retardant performance of particleboard. However, the smoke emission peaking problem at the initial combustion period, which was caused by adding base coating materials, should be resolved for further satisfaction as a fire retardant materials.

참고문헌 (40)

  1. S.J. Kang, "Application Handbook of carbon materials", pp.715~ (2008), Publisher Daeyoung
  2. B. Dittrich, "Flame retardancy through carbon nanomaterials: Carbon black, multiwall nanotubes, expanded graphite, multi-layer graphene and graphene in polypropylene", Polym. Degrad. Stabli., 98, pp.1~11 (2013)
  3. T. Kamae, "Carbon fiber", epoxy composite property enhancement through incorporation of carbon nanotubes at the fiber-matrix interphase - Part I: The development of carbon nanotube coated carbon fibers and the evaluation of their adhesion, 2012, pp.43(9), 1569~1577
  4. S. Stankovich, "Graphenebased composite materials", Nature, 442, pp.282~286 (2006)
  5. S. Virendra, "Graphene based materials: Past, present and future", Prog. Mater. Sci, 56, pp.1178~1271 (2011)
  6. V. Babrauskas, "Development of the Cone Calorimeter - A Bench-scale Heat Release Rate Apparatus Based on Oxygen Consumption", Fire and Materials, 8(2), pp.81~95 (1983)
  7. J. Rychlý, "The rate of oxygen consumption from a cone calorimeter as an original criterion of evaluation of the fire risk for the Resin Kit polymers", Eur. j. environ. saf. sci., 2(2), pp.23~27 (2014)
  8. H. Fukushima, "A carbon nanotube alternative: graphite nanoplatelets as reinforcements for polymers", ANTEC 2003 Conference Proceedings, pp.2230~2234 (2003)
  9. S. Kim, "High latent heat storage and high thermal conductive phase change materials using exfoliated graphite nanoplatelets", Sol, Energy, Mater, Sol, C., 93, pp.136~142 (2009)
  10. J.I. Kim, "Evaluation of flame retardant performance of retardant-treated wood by inorganic flame retardant", J, Kor, Wood, Sci, Technol., Spring Annual Conference, pp.56~57 (2012)
  11. S. Lee, "Realtime observation of the expansion behavior of intercalated graphite flake", J, Mater, Sci., 40, pp.231~234 (2005)
  12. J.J. Mack, "Graphite nanopletelet reinforcement of electrospun polyacrylonitrile nanofibers", Adv, Mater., 17, pp.77~80 (2005)
  13. Y.F. Zhao, "Preparation and properties of electrically conductive PPS", expanded graphite nanocomposites, 2007, pp.67, 2528~2534
  14. S. Ansari, "Functionalized graphene sheetpoly(vinylidene fluoride) conductive nanocomposites", J, Polym, Sci, B, Polym. Phys., 47, pp.888~897 (2009)
  15. T. Ramanathan, "Functionalized graphene sheets for polymer nanocomposites", Nat, Nanotechnol., 3, pp.327~331 (2008)
  16. 서현정, "탄소재료를 적용한 목질 건축재료의 난연 성능 평가", 한국생활환경학회지, 21(5), pp.855~861 (2014), 한국생활환경학회
  17. 서현정, "탄소나노소재의 건축재료 활용을 위한 난연 성능 향상방안 고찰", 한국생활환경학회지, 20(4), pp.514~526 (2013), 한국생활환경학회
  18. 박윤, "난방에너지 절감을 위한 개질 그라파이트 적용 강화마루용 목질보드의 열전도율 향상", 한국생활환경학회지, 18(6), pp.650~655 (2011), 한국생활환경학회
  19. S.W. Moon, "A Study on the fire prevention performance evaluation of the wood impregnated with flame retardant", J. Kor. Institute of Fire Sci. & Eng., Spring Annual Conference, pp.321~324 (2011)
  20. 박형주, "물유리와 이산화탄소로 가압함침한 가문비 나무의 연소특성", 한국화재소방학회 논문지, 26(4), pp.18~23 (2012), 한국화재소방학회[DOI]
  21. 최정민, "난연처리된 소나무와 잣나무의 연소특성 연구", 목재공학, 39(3), pp.244~251 (2011), 한국목재공학회
  22. 손동원, "난연처리 목재의 방미 및 방부성능", 목재공학, 41(6), pp.559~565 (2013), 한국목재공학회
  23. 김성찬, "목재 가연물의 두께에 따른 화염연소와 훈소상태에서의 화재특성", 한국화재소방학회 논문지, 29(4), pp.67~72 (2015), 한국화재소방학회[DOI]
  24. 정영진, "암모늄염 처리 베니어의 연소특성", 공업화학, 18(2), pp.194~198 (2007), 한국공업화학회
  25. J. Lindholm, "Influence of decreased sample size on cone calorimeter results", Fire Mater, 36, pp.63~73 (2012)
  26. 서현정, "난연처리 국산 침엽수재의 연소특성 분석", 한국연소학회지, 22(2), pp.9~18 (2017), 한국연소학회[DOI]
  27. L.A. Lowden, "Flammability behavior of wood and a review of the methods for its reduction", Fire. Sci. Rev., 2(4), pp.1~19 (2013)
  28. C. Branca, "Semi-global mechanisms for the oxidation of diammonium phosphate impregnated wood", J. Anal. Appl. Pyrolysis., 91(1), pp.97~104 (2011)
  29. W.F. Walter, "Characterization of commercial expandable graphite fire retardants", Thermochimica Acta, 584, pp.8~16 (2014)
  30. Z.X. Zhang, "Effect of flame retardants on mechanical properties, flammability and foamability of PP", wood-fiber composites, 2012, pp.43, 150~158
  31. H. Fukushima, "Thermal conductivity of exfoliated graphite nanocomposites", J. Therm. Anal. Calorim., 85, pp.235~238 (2006)
  32. B. Li, "Influence of polymer additives on thermal decomposition and smoke emission of poly(vinyl chloride)", Polym. Degrad. Stabil., 82(3), pp.467~476 (2003)
  33. B.H. Lee, "Evaluating the flammability of wood-based panels and gypsum particleboard using a cone calorimeter", Constr. Build. Mater., 25(7), pp.3044~3050 (2011)
  34. A.P. Mouritz, "Heat release of polymer composites in fire", Compos. Part A. Appl. Sci. Manuf., 37(7), pp.1040~1054 (2006)
  35. A.F. Bettencourta, "Biodegradation of acrylic based resins: A review", Dent. Mater., 26, pp.171~180 (2010)
  36. J.H. Lee, "Thermal Extractor Analysis of VOCs Emitted from Building Materials and Evaluation of the Reduction Performance of Exfoliated Graphite Nanoplatelets, Indoor", Built. Environ., 22(1), pp.68~76 (2014)
  37. H.J. Seo, "Development of thermally enhanced wood-based materials with high VOCs adsorption using exfoliated graphite nanoplatelets for use as building materials", Bioresources, 10(4), pp.7081~7091 (2015)
  38. C.E. Byrne, "Carbonization of wood for advanced materials applications", Carbon, 35(2), pp.259~266 (1997)
  39. 서현정, "실내 사용 목재의 연소 특성 분석 (Ⅱ)", 목재공학, 43(4), pp.478~485 (2015), 한국목재공학회
  40. 서현정, "국내 유용 해외 목재 수종의 연소특성 평가", 목재공학, 44(1), pp.19~29 (2016), 한국목재공학회

이 간행물의 다른 논문 (6건)

로터리킬른 화염 및 열전달 모형 - 연료에 따른 열 성능 분석 사례최상민, 최동환pp. 9-18가압 DTF를 이용한 석탄 촤-CO2 가스화 반응상수 도출라호원, 윤성민, 류창국, 손근, 예인수pp. 19-26석탄 보일러에서 회분 부착성향 예측 접근 방법에 대한 고찰김대희, 김정래, 최상민pp. 27-34석탄화력 탈황설비 Non-leakage Type Gas-Gas Heater(GGH) 운영 및 개선사례성기종, 이창식pp. 35-42Multi-environment PDF 모델을 이용한 MILD 연소과정 해석지형근, 김용모, 전상태pp. 43-50
원문 보기