카자흐스탄 구리제련소 슬래그 내 구리회수를 위한 선별 특성
Characteristic of Flotation for Recovery of Copper from Copper Slag in Kazakhstan
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
일반적으로 구리제련 슬래그내 구리함량은 0.5-3.7% 혹은 그 이상의 높은 비율로 포함되어 있며, 슬래그내 구리회수에 대한 대표적인 방법으로는 부유선별, 침출 그리고 배소가 있다. 본 연구에서는 부유선별법에 의한 구리 회수방법을 검토하였으며, 잔세이트포수제를 이용한 황화부선을 수행하였다. 산성과 알칼리 조건에서 부유선별 특성을 관찰하였으며, pH 4 에서 구리회수율 50%, pH 11 에서 구리회수율 67%로 나타났으며, 특히 pH 11에서는 100 µm 이상의 입자가 정광으로 부유되어 회수율이 상대적으로 높게 나타나는 경향을 보였다. 슬래그 입도를 200 mesh 이하로 분쇄하여 단체분리도를 향상시켜 pH조건별 부유선별 실험을 수행한결과, 회수율이 78 - 83%까지 향상되는 것을 확인할 수 있었다.
Abstract
Almost all copper slags contain a considerable amount of Cu (0.5 - 3.7%) close to or even higher than copper ores. A number of methods for metal recovery from copper slag were reported These methods can be classified into three categories, flotation, leaching and roasting. Sulfide flotation method for the recovery of copper from Kazahstan copper furnace slag is discussed in this investigation. 50% of copper from the slag was recovered by sulfide flotation at pH 4. meanwhile 67% of copper from the slag was recovered at pH 11. Higher copper recovery result at pH 11 rather than that at pH 4 was caused by the fact that copper sulfides were floated in particle size fraction over 100 µm in concentrates at pH 11. When the slag were ground below 74 µm by ball milling, the recovery of copper by floation in slag improved to 78 - 83% because of copper liberation effect.
참고문헌 (13)
- Mahn Kim, "Characteristics of the Copper Converter Slag-Recovery of Copper from the Copper Converter Slag(I)", Journal of the Korean Institute of Resources Recycling, 1(1), pp.15~22 (1992)
- Young-Chin Kim, "Characteristics and utilization of copper slag", Geoenvironmental engineering, 2(1), pp.37~47 (2001)
- H. Shen, "An overview of recovery of metals from slags", WasteManagement, 23(10), pp.933~949 (2003)
- A. Sarrafia, "Recovery of copper from reverberatory furnace slag by flotation", Minerals Engineering, 17(3), pp.457~459 (2004)
- D. M. Urosevic, "Recovery of copper from copper slag and copper slag floration tailings by oxidative leaching", Physicochemical Problems of mineral Processing, 51(1), pp.73~82 (2015)
- K. Lee, "Flotation of mixed copper oxide and sulphide minerals with xanthate and hydroxamate collectors", Minerals Engineering, 22(4), pp.395~401 (2009)
- Barnes, C. D., "Copper converter slag treatment at Mount Isa Mines Limited, Mount Isa, Qld", AusIMM Proceedings, 298(1), pp.31~ (1993)
- W.J Bruckard, "The recovery of copper, by flotation, from calcium-ferrite-based slags made in continuous pilot plant smelting trials", Minerals Engineering, 17(4), pp.495~504 (2003)
- Jae-Hyun Oh, "Recovery of copper from th copper converter slag(II)", Journal of the Korean Institute of Resources Recycling, 17(4), pp.33~41 (1993)
- Mukendi Kongolo, "The comparison between amine thioacetate and amyl xanthate collector performances for pyrite flotation and its application to tailings desulphurization", Minerals Engineering, 17(4), pp.505~515 (2004)
- Hongjun Huang, "Hydrophobic-surface of copper from converter slag in the flotation system", International Journal of Mining Science and Technology, 23(4), pp.613~617 (2013)
- Srdjan M. Bulatovic, "Handbook of Flotation Reagents-Chemistry, Theory and Practice : Flotation of Sulfide Ores", Elsevier Science & Technology books, 1 (2007)
- Barry A. Wills, "Wills’ Mineral Processing Technology-An Introduction to the Practical Aspects of Ore Treatment and Mineral Recovery" (2006), Elsevier