노트북 인쇄회로기판 전자부품으로부터 탄탈럼의 분리
Separation of Tantalum from Electronic Components on Laptop Printed Circuit Board Assembly
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
노트북 실장인쇄회로기판(Printed Circuit Board Assembly, PCBA)으로부터 탄탈럼을 회수하기 위한 선별실험을 실시하였다. 우선노트북 실장인쇄회로기판에 실장된 전자부품(Electronic Components, ECs)을 자체개발한 실험장치를 이용하여 기판으로부터 분리하였다. 분리된 전자부품을 체분리하여.6.35+2.80 mm구간에서 전체 탄탈럼 캐퍼시터의 약 93.2 wt.%를 회수할 수 있었다. 회수된탄탈럼 캐퍼시터를 해머밀로 분쇄 후, 자력선별기를 통해 자력세기 300 가우스에서 분쇄물 중의 전극을 제거하였다. 전극이 제거된자력선별 산물을 대상으로 넬슨 선별기(Knelson concentrator)를 이용한 선별 실험 결과 Bowl의 회전수 200 rpm, 유동층수 유량 7 L/min에서 76.9%의 최대 선별효율을 보였으며, 이때 품위 및 회수율은 각각 약 81.1%, 약 78.8%를 나타내었다.
Abstract
The study to obtain tantalum concentration from electronic components (ECs) on Printed circuit board assembly (PCBA) of laptop was conducted. Electronic components on laptop PCBA were detached from boards by using self-developed experimental apparatus. The detached electronic components were sieved and 93.2 wt.% of tantalum capacitors were concentrated from the size interval from 2.80 mm to 6.35 mm. The tantalum capacitors were pulverized by hammer mill and electrodes (anode and cathode) were removed from the grinding products by using magnetic separators under the magnetic force of 300 Gauss. Finally, tantalum concentrate was concentrated from the magnetic separator products by using Knelson concentrator, and the maximum efficiency of 76.9% was achieved under the operating condition of bowl rotating speed of 200 rpm, and fluidizing water flowrate of 7 L/min. The grade and recovery of Ta concentrate under the condition were 81.1% and 78.8%, respectively.
참고문헌 (14)
- Zeng, X., "Current status and future perspective of waste printed circuit boards recycling", Procedia Environmental Sciences, 16, pp.590~597 (2012)
- Zhou, Y., "A new technology for recycling materials from waste printed circuit boards", Journal of Hazardous Materials, 175(1), pp.823~828 (2010)
- 정진기, "폐휴대폰 내의 인쇄회로기판에 함유된 금속 성분의 변화", 자원리싸이클링, 24(3), pp.76~80 (2015), 한국자원리싸이클링학회[DOI]
- Duan, H., "Systematic characterization of generation and management of e-waste in China", Environmental Science and Pollution Research, pp.1~15 (2015)
- Cui, J., "Metallurgical recovery of metals from electronic waste: A review", Journal of hazardous materials, 158(2), pp.228~256 (2008)
- Kabangu, M., "Separation of niobium and tantalum from Mozambican tantalite by ammonium bifluoride digestion and octanol solvent extraction", Hydrometallurgy, 129, pp.151~155 (2012)
- Lee, J.H., "The Apdong Nb-Ta ore deposit" (2005), Springer
- Spitczok von Brisinski, L., "Recovery of Metals from Tantalum Capacitors with Ionic Liquids", Chemie Ingenieur Technik, 86(1-2), pp.196~199 (2014)
- Choi, G.-S., "Production and Applications of Niobium and Tantalum", Korea Institute of Metals and Materials, 21(5), pp.8~ (2008)
- Park, S., "Apparatus for electronic component disassembly from printed circuit board assembly in ewastes", International Journal of Mineral Processing, 144, pp.11~15 (2015)
- Wills, B.A., "Wills' mineral processing technology:an introduction to the practical aspects of ore treatment and mineral recovery" (2011), Butterworth-Heinemann
- Coulter, T., "A mechanistic approach to modelling Knelson concentrators", Minerals Engineering, 18(1), pp.9~17 (2005)
- 고병헌, "넬슨선별기를 이용한 퇴적토 중 중금속 성분의 분리", 한국자원공학회지, 52(6), pp.587~591 (2015), 한국자원공학회
- Aravamudhan, S., "Separation based on shape Part II: Newton's separation efficiency", Powder technology, 39(1), pp.93~98 (1984)