본문 바로가기
KERD
논문KCI 등재

염화철 에칭 용액 재생을 위한 산화공정에 대한 연구

A Study on the Oxidation Process for Regeneration of Ferric Chloride Etching Solution

1

조회

0

다운로드

3

인용

0

참고문헌

키워드

주제분류자원공학

초록

FeCl 3 용액은 금속의 에칭용액으로 사용되며, 사용 후 발생하는 FeCl 3 에칭폐액은 환경적, 경제적으로 문제를 지니기 때문에 에칭액을 재사용할 필요가 있다. 본 연구에서는 FeCl 2 용액에 HCl을 첨가 한 후, 산화제로 H 2 O 2 를 첨가하여 용액 내 Fe 2+ 를 산화시켰으며, 산화과정에서 산화-환원전위(ORP)와 산화율 간의 관계를 조사하였다. ORP는 HCl과 H 2 O 2 의 농도가 증가함에 따라 증가하였으며, 산화가 진행되면서 점차 감소하여 Nernst 식과 일치하는 결과를 보였다. 또한 충분한 양의 HCl과 H 2 O 2 를 첨가하였을 경우, 약 99% 이상 산화가 이루어짐을 알 수 있었다.

Abstract

The FeCl 3 solution has been used as an etchant for etching of metal. It is necessary to reuse the etching solution because waste FeCl 3 etchant generated after use has provided environmental and economic problems. In this study, HCl was mixed with the FeCl 2 solution and then H 2 O 2 was added into the mixed solution to oxidize the Fe 2+ . During the oxidation process, oxidationreduction potential (ORP) was measured and the relationship between ORP and oxidation ratio was investigated. As a result, this study found that the ORP was increased with increasing the concentration of HCl and H 2 O 2 , while the ORP is decreased with oxidation progress. Such a behavior was in good agreement with Nernst’s equation. Also, the oxidation efficiency reached about 99% when a sufficient amount of HCl and H 2 O 2 were added.

참고문헌 (7)

  1. 이형민, "염화제이철 수용액에 의한 스테인레스 강판의 식각에 관한 연구", Korean Chemical Engineering Research(HWAHAK KONGHAK), 50(2), pp.211~216 (2012), 한국화학공학회
  2. D. Yoon, "Studies on the Ferric Chloride Etching of Shadow Masks", Hwahak Konghak, 38(3), pp.393~397 (2000)
  3. D. M. Allen, "Increasing utilisation efficiency of ferric chloride etchant in industrial photochemical machining", J. Environ. Monit., 1, pp.103~108 (1999)
  4. 이호연, "HCl과 H2O2를 이용한 폐 FeCl3 에칭액의 재생", 공업화학, 24(1), pp.67~71 (2013), 한국공업화학회
  5. D. M. Allen, "Characterisation of aquous ferric chloride etchants used in industrial photochemical machining", J. Materials Processing Technology, 149, pp.238~245 (2004)
  6. 유경근, "Fe-Ni 合金 스크랩의 黃酸 浸出液으로부터 Ni와 Fe의 分離", 자원리싸이클링, 17(1), pp.80~87 (2008), 한국자원리싸이클링학회
  7. 윤제용, "펜톤 화학 반응의 이론적 이해", 공업화학, 16(1), pp.9~14 (2005), 한국공업화학회

관련 논문AI추천

이 간행물의 다른 논문 (10건)