건식제련용 동 함유 슬러지 펠렛 제조 및 물리적 특성평가
Analyses of Physical Properties of Copper-contained Sludge Pelletized for Applied Pyro-metallurgical Process
1
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
인쇄회로기판(PCB) 제조 공정 중 발생된 슬러지로부터 구리성분을 건식제련방법으로 회수하기 위해서 슬러지를 원료로 한 펠렛화 연구를 진행하였다. 슬러지 펠렛화를 위해 건조, 해쇄, 입도분급의 전처리 실시하였고, 혼합 및 압축장치를 포함한 펠렛화 기기를 개발하였다. 제조된 펠렛의 물리적 특성평가는, 슬러지 입도, 펠렛화 압축 횟수를 변화시키면서 비파괴 낙하횟수, 압축강도를 측정하였다. #140 mesh over의 입자를 제거한 경우, 펠렛의 특성은 0.6 MPa, 9.3회로 향상되었으며, 여기에 #325 under 입자를 한번더 제거한 경우 0.82 MPa, 19.0회로 더욱 더 향상되었다. 이는 조립자의 경우, 충진밀도를 감소시키고, 미립자의 경우 성형에 요구되는 점결제의 투입량을 증가시키기 때문에 나타난 결과로 판단된다.
Abstract
The pelletizing of printed circuit board (PCB) sludge was researched for copper recovery in pyrometallurgical process. This pelletizing was carried out by using self-manufactured compression-type apparatus after pre-treatments (drying, water scrubbing, size classification) were proceeded. The physical properties (compression strength and drop-breakage test) were tested with a change of sludge sizing and the number of compression. In the case of using the undersized sludge of #140, its properties were improved to 0.6 MPa and 9.3 times. Moreover, they increased to 0.82 MPa and 19.0 times by using the #140 ~ 325 sludge. These imply that the packing density increases due to the elimination of large-sized sludge (#140), and also the weight of required binder decreases by the removal of fine-sized sludge (#325).
참고문헌 (28)
- Gòmez, F., "Copper recycling and scrap availability", Resources Policy, 32, pp.183~190 (2007)
- "KOMIS"[URL]
- Elaine, Y. L. S., "The recovery of metals from electronic scrap", JOM, 43(4), pp.53~61 (1991)
- Allardycy, G. R., "Process for Multiplayer Printed Circuit Board Manufacture", US Patent 5, 106, 454, ~ (1992)
- 이진연, "저품위 동(Cu) 함유 슬러지로부터 동 전해정련에 관한 연구", 자원리싸이클링, 26(6), pp.84~90 (2017), 한국자원리싸이클링학회[DOI]
- 김병수, "廢銅슬래그를 活用한 廢電氣電子 스크랩으로부터 有價金屬 高溫鎔融抽出 工程 開發", 자원리싸이클링, 16(3), pp.27~33 (2007), 한국자원리싸이클링학회
- Huang, Z., "Ultrasonic recovery of copper and iron through the simultaneous utilization of Printed Circuit Boards (PCB) spent acid etching solution and PCB waste sludge", Journal of Hazardous Materials, 185, pp.155~161 (2011)
- Leclerc, N., "Hydrometallurgical recovery of zinc and lead from electric arc furnace dust using mononitrilotriacetate anion and hexahydrated ferric chloride", Journal of Hazardous Materials, 91(1-3), pp.257~270 (2001)
- Katou, K., "Melting municipal solid waste incineration residue by plasma melting furnace with a graphite electrode", Thin Solid Films, 386(2), pp.183~188 (2001)
- Chang, C. J., "Feasibility of copper leaching from an industrial sludge using ammonia solutions", Journal of Hazardous Materials, 58(1-3), pp.121~132 (1998)
- 潘奉贊, "貴金屬 含有 廢棄物로부터 아크로를 利用한 有價金屬 回收", 자원리싸이클링, 11(6), pp.3~11 (2002), 한국자원리싸이클링학회
- Petkoca, E. N., "Mechanisms of floating slime formation and its removal with the help of sulphur dioxide during the electrorefining of anode copper", Hydrometallurgy, 46(3), pp.277~286 (1997)
- Chen, Y. L., "Hydration and leaching characteristics of cement pastes made from electroplating sludge", Waste Management, 31(6), pp.1357~1363 (2011)
- Tang, Y., "Copper sludge from printed circuit board production", recycling for ceramic materials. A quantitative analysis of copper transformation and immobilization, 2013, pp.47, 8609~8615
- 한철웅, "인쇄회로기판 제조공정 중 발생한 슬러지 내 건식환원 처리를 통한 구리 회수를 위한 슬러지 분석 및 열역학적 계산", 자원리싸이클링, 26(5), pp.85~96 (2017), 한국자원리싸이클링학회[DOI]
- Jarupisitthorn, C., "Investigation of kinetics of zinc leaching from electric arc furnace dust by sodium hydroxide", Materials Chemistry and Physics, 77(2), pp.531~535 (2003)
- Lu, C. W., "Flicker characteristic estimation of an AC electric arc furnace", Electric Power Systems Research, 54(2), pp.121~130 (2000)
- Best available techniques (BAT) reference document for the non-ferrous metals industries, "Miguel, R. G.", Joint Research Centre, 68~69 (2017)
- Sivrikaya, O., "Pelletization of magnetite ore with colemanite added organic binders", Powder Technology, 210(1), pp.23~28 (2011)
- Makoto, G., "Korea, 930001333B1", ~ (1993)
- Higashi, K., "WO 2011136273A1", ~ (2013)
- Go, J. R., "Korea, 101444893B1", ~ (2012)
- Kim, B. H., "Korea, 1019970015766", ~ (1998)
- Sivrikaya, O., "Alternative binders to bentonite for iron ore pelletizing. Part I. Effects on physical and mechanical properties", HOLOS, 3, pp.94~103 (2014)
- Sivrikaya, O., "bonding", strengthening mechanism of colemanite added organic binders in iron ore pelletization, 2012, pp.110, 90~100
- Satyananda, P., "The effect of particle size on green pellet properties of iron ore fines", Journal of Mining and Metallurgy A. Mining, 53(1), pp.31~41 (2017)
- Xu, D., "Mechanical strength and rewetting stability of nickel laterite pellets", Advanced Powder Technology, 24(4), pp.743~749 (2013)
- Kawatra, S. K., "Pelletizing steel mill desulfurization slag", International Journal of Mineral Processing, 65(3-4), pp.165~175 (2002)