데이터 마이닝을 이용한 시멘트 소성공정 질소산화물(NOx)배출 관리 방법에 관한 연구
A Study on NOx Emission Control Methods in the Cement Firing Process Using Data Mining Techniques
1
조회
0
다운로드
6
인용
0
참고문헌
키워드
초록
Purpose: The purpose of this study was to investigate the relationship between kiln processing parameters and NOx emissions that occur in the sintering and calcination steps of the cement manufacturing process and to derive the main factors responsible for producing emissions outside emission limit criteria, as determined by category models and classification rules, using data mining techniques. The results from this study are expected to be useful as guidelines for NOx emission control standards. Methods: Data were collected from Precalciner Kiln No.3 used in one of the domestic cement plants in Korea. Thirty-four independent variables affecting NOx generation and dependent variables that exceeded or were below the NOx emiision limit (>1 and <0, respectively) were examined during kiln processing. These data were used to construct a detection model of NOx emission, in which emissions exceeded or were below the set limits. The model was validated using SPSS MODELER 18.0, artificial neural network, decision treee (C5.0), and logistic regression analysis data mining techniques. Results: The decision tree (C5.0) algorithm best represented NOx emission behavior and was used to identify 10 processing variables that resulted in NOx emissions outside limit criteria. Conclusion: The results of this study indicate that the decision tree (C5.0) can be applied for real-time monitoring and management of NOx emissions during the cement firing process to satisfy NOx emission control standards and to provide for a more eco-friendly cement product.
Abstract
Purpose: The purpose of this study was to investigate the relationship between kiln processing parameters and NOx emissions that occur in the sintering and calcination steps of the cement manufacturing process and to derive the main factors responsible for producing emissions outside emission limit criteria, as determined by category models and classification rules, using data mining techniques. The results from this study are expected to be useful as guidelines for NOx emission control standards. Methods: Data were collected from Precalciner Kiln No.3 used in one of the domestic cement plants in Korea. Thirty-four independent variables affecting NOx generation and dependent variables that exceeded or were below the NOx emiision limit (>1 and <0, respectively) were examined during kiln processing. These data were used to construct a detection model of NOx emission, in which emissions exceeded or were below the set limits. The model was validated using SPSS MODELER 18.0, artificial neural network, decision treee (C5.0), and logistic regression analysis data mining techniques. Results: The decision tree (C5.0) algorithm best represented NOx emission behavior and was used to identify 10 processing variables that resulted in NOx emissions outside limit criteria. Conclusion: The results of this study indicate that the decision tree (C5.0) can be applied for real-time monitoring and management of NOx emissions during the cement firing process to satisfy NOx emission control standards and to provide for a more eco-friendly cement product.
참고문헌 (13)
- Ham, S. W., "Application of SNCR Process for NOx Removal from Limestone Calcining Process", Research Review Kyungil University, 16(6), pp.995~1002 (2007)
- The Global Cement Reort 9th Edition, "International Cement Review Magazine", International Cement Review, ~ (2011)
- 강상구, "진동연소기의 NOx 저감 효과 연구", 한국연소학회지, 12(4), pp.22~30 (2007), 한국연소학회
- 김재경, "철강 연주공정에서 데이터마이닝을 이용한 품질제어 방법에 관한 연구", 한국IT서비스학회지, 10(3), pp.113~126 (2011), 한국IT서비스학회
- Kim, Y. S., "PA17) A pilot study of NOx concentration emitted from cement industry", Proceeding of the 35th Meeting of KOSAE, pp.235~236 (2003)
- 이현우, "TFT-LCD 산업에서의 품질마이닝 시스템", 품질경영학회지, 34(1), pp.13~19 (2006), 한국품질경영학회
- Lee, J. H., "Design of Intelligent Material Quality Control System based on Pattern Analysis using Artificial Neural Network", Journal of the Korean Society for Quality Management, 29(4), pp.38~53 (2001)
- Lim, K. K., "Process Analysis for DeNOx in Cement Calcination Process", Proceeding of the Meeting of KOSAE, pp.146~147 (1998)
- Liu, H. B., "NOx reduction review on fuel alternative in cement kiln", Advanced Materials Research, 864, pp.1626~1629 (2014)
- Lv, D., "Effects of co-processing sewage sludge in cement kiln on NOx, NH3 and PAHs emissions", Chemosphere, 159, pp.595~601 (2016)[DOI]
- Ohno, M., "Establishment of a cement quality predictive system-Analyses of the relationships between characteristics ana properities of cement-", Cement Science and Concrete Technology, 66(1), pp.87~94 (2012)[DOI]
- 송서일, "데이터 마이닝과 통계적 기법을 통합한 최적화 기법", 품질경영학회지, 34(4), pp.33~39 (2006), 한국품질경영학회
- Zhang, Y., "ANN-GA approach for predictive modelling and optimization of NOx emissions in a cement precalcining kiln", International Journal of Environmental Studies, 74(2), pp.253~261 (2017)[DOI]