노이즈 필터 도면 표준화 방안에 관한 연구
A study on the standardization of Noise Filter drawings
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Purpose: The purpose of this study was to propose a standard form of noise filter drawing, which is widely used in the field of weapon systems, to define the essential specification which is not standardized at the existing drawings and to employ the reference for manufacturing and qualification test. Methods: To do that, it identifies the improvements to analyze 19 noise filter drawings, studies the principle of noise filtering to find the essential part of the spec. and reviews the MIL-STD-220C and KS IEC 60939, which is the widely used as a formal spec. pertaining to the noise filter. Throughout the study, a standard form is developed to standardize the attenuation characteristics and find eight crucial metrics to specify the noise filter. Results: The results of this study are as follows; The standardized drawings can be used as the qualification test of the item and the manufacturing and engineering documents to make the noise filter, which are also applicable to the reference document to review KDS(Korea Defense Standard) drawings.
Abstract
Purpose: The purpose of this study was to propose a standard form of noise filter drawing, which is widely used in the field of weapon systems, to define the essential specification which is not standardized at the existing drawings and to employ the reference for manufacturing and qualification test. Methods: To do that, it identifies the improvements to analyze 19 noise filter drawings, studies the principle of noise filtering to find the essential part of the spec. and reviews the MIL-STD-220C and KS IEC 60939, which is the widely used as a formal spec. pertaining to the noise filter. Throughout the study, a standard form is developed to standardize the attenuation characteristics and find eight crucial metrics to specify the noise filter. Results: The results of this study are as follows; The standardized drawings can be used as the qualification test of the item and the manufacturing and engineering documents to make the noise filter, which are also applicable to the reference document to review KDS(Korea Defense Standard) drawings.
참고문헌 (24)
- B. S. Kim, "The modeling and optimization of EMI Filter using S-parameter", pp.2014
- B. S. Shin, "Noise Reduction Technique for Electronic Medical Device", pp.2014
- C. David K., "Field and wave electromagnetics" (1989), Addision-Wesley
- Department of Defense(DoD), "Electromagnetic Emission and Susceptibility Requirements For the control of Electromagnetic Interference, MIL-STD-461C", ~ (1986)
- Department of Defense(DoD), "Electromagnetic Interference characteristics requirement for equipment, MIL-STD-461F", ~ (2007)
- Department of Defense(DoD), "TEST METHOD STANDARD METHOD OF INSERTION LOSS MEASUREMENT, MIL-STD-220B", ~ (2000)
- Department of Defense(DoD), "TEST METHOD STANDARD METHOD OF INSERTION LOSS MEASUREMENT, MIL-STD-220C", ~ (2009)
- Federal Communication Commission(FCC), "Radio Frequency Device, Code of Federal Regulation, Titel 47, Part 15(47 CFR 15)", ~ (2015)
- J. H. Lee, "A study on the standardization of Noise Filter, DTaQ-18-5683-R", ~ (2018)
- Korean Agency for Technology and Standards, "Complete filter units for radio interference suppression- Part 1: Generic specification, KS C IEC 60939-1", ~ (2003)
- M. S.Zainal, "Reduction of conducted emission noise using various power supply filters, In Applied Electromanetics", APACE 2003. Asia-Pacific Conference on, pp.100~103 (2003), IEEE
- Verband Deutscher Elektrotechnicker, "Radio interference suppression of radio frequency equipment. DIN VDE 0871", ~ (1991)
- Wllamowski, "Power electronics and motor drives" (2011), CRC Press
- Y. J. Son, "Improvement of FFX Batch-I Military satellite-ES EMI interference, DTaQ-16-4676-R", ~ (2016)