자동차 전장품의 환경시험규격에 관한 연구
Environmental Test Specifications for Automotive Electrical Units
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
Purpose: Using international specifications, this study classified international standards and automobile manufacturers’ test items based on the kind of test used and determined the test order for ISO 16750. Methods: The effects of international standards’ environmental factors were examined, based on the major impacts of the product and the results of product failure. Automobile manufacturers’ test items were compared with the test item in the ISO 16750. A generic algorithm was then used to determine the test sequence for ISO 16750. Results: International standards and automobile manufacturers’ common test items were classified. The test sequence of ISO 16750 was determined for five cases. Conclusion: Although mechanical and environmental tests share many common features, there are differences in the details of the tests. There is a common sequence of tests, but weights are allocated tests differently.
Abstract
Purpose: Using international specifications, this study classified international standards and automobile manufacturers’ test items based on the kind of test used and determined the test order for ISO 16750. Methods: The effects of international standards’ environmental factors were examined, based on the major impacts of the product and the results of product failure. Automobile manufacturers’ test items were compared with the test item in the ISO 16750. A generic algorithm was then used to determine the test sequence for ISO 16750. Results: International standards and automobile manufacturers’ common test items were classified. The test sequence of ISO 16750 was determined for five cases. Conclusion: Although mechanical and environmental tests share many common features, there are differences in the details of the tests. There is a common sequence of tests, but weights are allocated tests differently.
참고문헌 (17)
- Ford, "WDS EA-D11. Environmental requirements-(non-EMC) vehicle electrical and electronic systems", ~ (1999)
- GM, "GMW3172. General specification for electrical", electronic components-environmental, pp.2012, ~
- IEC, "IEC 60068-1. Environmental testing- part 1: general and guidance", ~ (2013)
- ISO, "ISO 16750-3. Road vehicles-environmental conditions and testing for electrical and electronic equipment-part3: mechanical loads", ~ (2012)
- ISO, "ISO 16450-4. Road vehicles-environmental conditions and testing for electrical and electronic equipment-part4: climatic loads", ~ (2010)
- ISO, "ISO 16450-5. Road vehicles-environmental conditions and testing for electrical and electronic equipment-part5: chemical loads", ~ (2010)
- Kim, J. -G., "Highly Accelerated Life Tests for Auto-Connector in Use-Environment", Korea Safety Management & Science Conference, pp.229~235 (2004)
- Kim, D., "Evaluation of Contaminant Characteristics for Environmental Durability Test of Automotive Joints and Seals", The Korean Society Of Automotive Engineers Conference, pp.1265~1270 (2008)
- Kim, M. H., "Thermal Environment Test of T-50 Aircraft utilizing the Environmental Test Facility", Journal of The Korean Society for Aeronautical & Space Sciences, pp.1298~1301 (2010)
- 이동호, "대기 중 모래 먼지 유입이 소형 가스터빈엔진에 미치는 영향에 대한 연구", 대한기계학회논문집 B, 36(8), pp.791~796 (2012), 대한기계학회[DOI]
- Lee, "A Study on the Temperature Stabilization Time during Temperature Environmental Test of the Battery System for Green Cars", IEEE Vehicle Power and Propulsion Conference, pp.1548~1551 (2012)
- Saarinen, K., "Reliability of UHF RFID Tags in Humid Environments", Electronics Packaging Technology Conference, pp.180~184 (2012)
- Sohn, E. -H., "Space Environment Test Center Operation in Russia", Current Industrial and Technological Trends in Aerospace, 13(1), pp.71~78 (2015)
- Volkswagen, "VW 80000. Electric and electronic components in motor vehicles up to 3.5t-general component requirements, test conditions and tests", ~ (2010)
- Yang, J. H., "A Study of the Optimal Environmental Test Sequence for Electrical Units" (2014)
- 양정호, "항공기 전장품의 환경시험순서에 관한 연구", 신뢰성 응용연구, 14(2), pp.114~121 (2014), 한국신뢰성학회
- Yang, J. Y., "Vibration Test for the Aircraft Landing Gear", Journal of The Korean Society for Aeronautical & Space Sciences, pp.1534~1538 (2012)