공진회피를 위한 전조등조립체의 고유진동수 해석 및 신뢰성 개선 연구
Study on Natural Frequency Analysis to Avoid Resonance and the Improvement of the Headlight System Reliability
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Purpose: This article provides a cause of breakage and a method for improving reliability of the headlight system installed in the main battle tank K2. Method: The natural frequency of the headlight system is estimated by using the finite element method. In addition, the allowable stress level under the severe conditions is provided through vibration test of a single item and a system level. Results: Based on the finite element analysis and the vibration test in the frequency domain, the lamp of the left headlight system fails by the resonance effect. Conclusion: For improving the reliability of the headlight system, the thickness of protector frame is increased to avoid the resonance effect.
Abstract
Purpose: This article provides a cause of breakage and a method for improving reliability of the headlight system installed in the main battle tank K2. Method: The natural frequency of the headlight system is estimated by using the finite element method. In addition, the allowable stress level under the severe conditions is provided through vibration test of a single item and a system level. Results: Based on the finite element analysis and the vibration test in the frequency domain, the lamp of the left headlight system fails by the resonance effect. Conclusion: For improving the reliability of the headlight system, the thickness of protector frame is increased to avoid the resonance effect.
참고문헌 (11)
- Kim, H. H., "Vibration Characteristic and Fatigue Analysis of Engine Mount Bracket", Proceedings of the Korean Society of Automotive Engineers Spring Meeting, pp.1226~1232 (2003)
- Lee, B. U., "An Experiment Study on Resonance Frequency Change by Forced Vibration Level", Proceedings of the Korean Society for Noise and Vibration Engineering, pp.227~229 (2015)
- 허윤석, "입력가진 조건에 따른 선형 시스템의 피로손상도 비교 평가", 한국소음진동공학회논문집, 24(6), pp.437~443 (2014), 한국소음진동공학회[DOI]
- Saran, A., "Real time power system simulation using RTDS and NI PXI", Power Symposium, NAPS '08. 40th North American (2009)
- 최재승, "다중 켑스트럼 추출 및 RMS 진폭 방식을 적용한 음성합성 알고리즘", 한국정보기술학회논문지, 11(6), pp.157~162 (2013), 한국정보기술학회
- 홍도관, "공진회피를 위한 철도차량의 고유진동수 해석 및 측정에 관한 연구", 한국소음진동공학회논문집, 22(8), pp.713~719 (2012), 한국소음진동공학회[DOI]
- 최호일, "왕복운동에서의 고유주파수 변화에 따른 마찰소음 특성 연구", 한국소음진동공학회논문집, 24(4), pp.332~338 (2014), 한국소음진동공학회[DOI]
- 김세희, "그래프 분석과 호감도 함수를 이용한 헬리콥터 개발형상의 진동저감 사례", 품질경영학회지, 43(3), pp.341~358 (2015), 한국품질경영학회
- 임현규, "회전익 항공기 장축 조종로드 분할 형상의 품질 신뢰성에 관한 실증적 연구", 품질경영학회지, 45(3), pp.365~378 (2017), 한국품질경영학회[DOI]
- 김석현, "국부 공진을 고려한 주름강판의 차음 설계", 한국소음진동공학회논문집, 20(7), pp.672~676 (2010), 한국소음진동공학회
- 이혁순, "발전기교체로 인한 축계의 비틀림 고유주파수 영향 및 측정결과 고찰", 한국소음진동공학회논문집, 23(3), pp.267~273 (2013), 한국소음진동공학회[DOI]