역설계 기반 제조기술 설계를 통한 방탄용 부가장갑킷트 개발에 관한 연구
A Research on Development of Applique Armor Kit for Design of Manufacturing Technology based on the everse Engineering
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Purpose: The study focused on localization of the enhanced applique armor kit (EAAK), which are applied to Korea Assault Amphibious Vehicle (KAAV). Methods: For this propose, we developed the manufacturing technology by analyzing the original products. Considering the conditions used in the military, we made the test evaluation criteria. Results: In results, The EAAK developed through this research performs equivalent performance compared to Rafael, Co. Thus, It is possible not only stably supply a parts of EAAK for maintenance, but also to reduce costs due to import substitution effect. Conclusion: It is expected that the manufacturing technology and test evaluation criteria accumulated through this study can be used in the localization of similar parts.
Abstract
Purpose: The study focused on localization of the enhanced applique armor kit (EAAK), which are applied to Korea Assault Amphibious Vehicle (KAAV). Methods: For this propose, we developed the manufacturing technology by analyzing the original products. Considering the conditions used in the military, we made the test evaluation criteria. Results: In results, The EAAK developed through this research performs equivalent performance compared to Rafael, Co. Thus, It is possible not only stably supply a parts of EAAK for maintenance, but also to reduce costs due to import substitution effect. Conclusion: It is expected that the manufacturing technology and test evaluation criteria accumulated through this study can be used in the localization of similar parts.
참고문헌 (15)
- Andreas Klavzar, "Ballistic Limit Thickness and Failure of Steel Targets with Different Strengths under EFP Impact", Procedia Engineering, 197, pp.270~277 (2017)
- 최창현, "군수품의 고품질 확보를 위한 개발 품질보증 적용사례 연구", 품질경영학회지, 47(1), pp.151~162 (2019), 한국품질경영학회[DOI]
- Crouch, Ian G., "The Science of Armour Materials" (2017), Woodhead Publishing
- David Fecko, "Composite Armor Solutions for Stanag 4569 Ballistics Protection Levels" (2005), AGT
- Dwight D. showalter, "Ballistic Testing of SSAB Ultra-High_hardness Steel for Armor Applications" (2008), ARMY RESEARCH LABORATORY
- Development and Ballistic Testing of a New Class of Auto-Tempered High-Hard Steels Under Military Specification MIL-DTL-46100E, "Dwught Showalter", Army Research Laboratory, ~ (2009)
- Hazell, Paul J., "Armour - Materials, Theory and Design" (2015), CRC Press
- 장봉기, "QFD 및 Stage-gate 모델을 활용한 국방분야 개발단계 품질관리 방안 연구", 품질경영학회지, 42(3), pp.279~290 (2014), 한국품질경영학회[DOI]
- Kim Hee Jae, "Bulletproof engineering" (2004), Cheong Moon Gak Publishing Co
- Lee Dae Jil, "Composite Materials" (2007), Hongreung Publishing Co
- 박영민, "군용장갑차 및 자주포용 송풍기의 내구수명 향상에 대한 연구", 품질경영학회지, 47(3), pp.453~465 (2019), 한국품질경영학회[DOI]
- Paul J Hogg, "Composites for Ballistic Applications" (2003), Department of Materials Queen Mary, University of London
- Pawel Zochowski, "Add-on Passive Armour for Light Armoured Vehicles Protection" (2017), Military Institute of Armament Technology
- Petr Pechoucek, "Fragment Simulating Projectile Penetration into Layered Targets", Engineering Mechanics, 18(5, pp.6) (2011), 353~361
- S Ryan, "Ballistic evaluation of an Australian ultra-high hardness steel" (2016), Faculty of Engineering and Information Sciences