Suction based Wall Climbing Robot for Edge Movement
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The camera embedded wall climbing robot in this paper combines the suction and aerodynamic attraction toachieve good balance between strong adhesion force and high mobility and adopts embedded image processingtechnique to detect targets on the warehouse inspection. Experimental results showed that the robot can moveupward on the wall at the speed of 2.9m/min and carry 5kg payload in addition to 2.5kg self-weight, whichrecord the highest payload capacity among climbing robots of similar size. With two 11.1V lithium-polymerbattery, the robot can operate continuously for half hours. A wireless camera system, zigbee protocol module andseveral sensors was adopted for detecting target objects and dangerous situation on the wall and for sendingalarm signals to remote sensor node or manager.
Abstract
The camera embedded wall climbing robot in this paper combines the suction and aerodynamic attraction toachieve good balance between strong adhesion force and high mobility and adopts embedded image processingtechnique to detect targets on the warehouse inspection. Experimental results showed that the robot can moveupward on the wall at the speed of 2.9m/min and carry 5kg payload in addition to 2.5kg self-weight, whichrecord the highest payload capacity among climbing robots of similar size. With two 11.1V lithium-polymerbattery, the robot can operate continuously for half hours. A wireless camera system, zigbee protocol module andseveral sensors was adopted for detecting target objects and dangerous situation on the wall and for sendingalarm signals to remote sensor node or manager.
참고문헌 (12)
- Clark, J, "Komsuoglu, H, Full, R, Koditschek, D. “Design of a Bio-inspired Dynamical Vertical Climbing Robot", Proceedings of Robotics: Science and Systems 2007 (2007)
- Hirose, S., "Disk rover: "A wall-climbing robot using permanent magnet disks", Proceedings of the 1992 IEEE, 1992, 2074~2079
- Li Jun, "Adsorption Performance of Sliding Wall Climbing Robot", CHINESE JOURNAL OF MECHANICAL ENGINEERIN (2010)
- Tomotuki Yamaguchi, "SIEN: Telescopic-Arm Climbing-Support Robot" (2009), Department of Applied Physics, Waseda University
- Manuel F.Silva, "A Survey of Technologies and Applications for Climbing Robots Locomotion and Adhesion", Instituto Superior de Engenharia do Porto Portugal (2006)
- Jizhong Xiao, "City-Climber: A New Generation Wall-climbing Robots" (2008), The City College, City University of New York USA
- 송영국, "임펠러를 이용한 벽면이동로봇의 설계 및 제어에 관한 연구", 석사, 메카트로닉스, pp.2010
- 이상무, "이동로봇 기반의 지능적 움직임 감지 방법 연구", 한국컴퓨터게임학회논문지, (18), pp.11~17 (2009), (사)한국컴퓨터게임학회
- Sanghoon Kim, "Object Tracking using Moving Color and Active Contour Information", ITC-CSSS2006, Thailand (2006)
- 김상훈, "모바일 임베디드 기반의 물체검출 영상처리", 한국컴퓨터게임학회논문지, 26(1), pp.115~121 (2013), (사)한국컴퓨터게임학회
- Sang-Hoon Kim, "Mobile image sensors for object detection using color segmentation", Cluster Computing (2013)[DOI]
- 김상훈, "Intelligent Embedded robot for Warehouse Inspection", 한국컴퓨터게임학회논문지, 26(1), pp.131~135 (2013), (사)한국컴퓨터게임학회