방사선 그라프트 PFA-폴리스티렌 멤브레인으로 제조한 직접메탄올 연료전지용 MEA의 성능과 특성
Characterization and Performance of MEA for Direct Methanol Fuel Cell Prepared with PFA Grafted Polystyrene Membranes via Radiation-Grafting Method
0
조회
0
다운로드
5
인용
0
참고문헌
초록
DMFC (Direct Methanol Fuel Cell)용의 새로운 고분자 전해질 멤브레인을 개발하기 위하여 스티 렌 단량체를 poly(tetrafluoroethylene perfluoropropyl vinyl ether) (PFA) 필름에 그라프트 중 합 반응시킨 후에 술폰화 반응을 진행하였다. γ-ray를 이용하여 방사선 그라프트 중합 반응시킨 방사선 그라프트 필름의 술폰화 반응은 chlorosulfonic acid/dichloroethane (5 v/v%) 혼합 용액 에서 진행하였다. PFA 그라프트 폴리스티렌 멤브레인 (PFA-g-PSSA)의 화학적, 물리적, 전기화 학적 및 형태의 특성은 푸리에 변환 적외선 분광기 (FTIR), 이온전도도 측정기 및 주사전자현미 경 (SEM)으로 분석하고 함수율과 메탄올 투과도도 측정하였다. PFA-g-PSSA 멤브레인으로 제작 한 MEA의 단위전지 성능을 평가하였고, 전지의 셀 저항은 임피던스 분석 장치를 이용하여 측 정하였다. PFA-g-PSSA 멤브레인으로 제조한 MEA는 Nafion 112로 제조한 MEA보다 우수한 DMFC 성능을 나타내었다.
Abstract
In order to develop a novel polymer electrolyte membrane for direct methanol fuel cell (DMFC), styrene monomer was graft-polymerized into poly(tetrafluoroethylene perfluoropropyl vinyl ether) (PFA) film followed by a sulfonation reaction. The graft polymerization was prepared by the γ-ray radiation-grafting method. Subsequently, sulfonation of the radiation-grafted film was carried out in a chlorosulfonic acid/1,2-dichloroethane (2 v/v%) solution. The chemical, physical, electrochemical and morphological properties of the radiation-grafted membranes (PFA-g-PSSA) were characterized by fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). The water uptake, ionic conductivity, and methanol permeability of the PFA-g-PSSA membrane were also measured. The cell performances of MEA prepared with the PFA-g-PSSA membranes were evaluated and the cell resistances were measured by an impedance analyzer. The MEA using PFA-g-PSSA membranes showed superior performance for DMFCs in comparison with the commercial Nafion 112 membrane.
참고문헌 (17)
- C. K. Dyer, "Fuel cells for portable applications", J. Power Sources, 106, pp.31~ (2002)
- X. Ren, "Methanol Transport Through Nation Membranes.Electro-osmotic Drag Effects on Potential Step Measurements", J. Electrochem. Soc, 147, pp.466~ (2000)
- T. Kallio, "Relationship between methanol permeability and structure of different radiation-grafted membranes", Fuel cells, 4, pp.328~ (2004)
- V. Neburchilov, "A review of polymer electrolyte membranes for direct methanol fuel cells", J. Power Sources, 169, pp.221~ (2007)
- D. H. Jung, "Performance evaluation of a Nafion", silicon oxide hybrid membrane for direct methanol fuel cell, 2002, pp.106, 173~
- R. Zeng, "Modification of a Nafion ion exchange membrane by a plasma polymerization process", J. Electroanal. Chem, 490, pp.102~ (2000)
- K. Miyatake, "Novel sulfonated poly(arylene ether): a proton conductive polymer electrolyte designed for fuel cells", Macromolecules, 36, pp.9691~ (2003)
- R. K. Nagarale, "Organic-inorganic hybrid membrane: thermally stable cation-exchange membrane prepared by the sol-gel method", Macromolecules, 37, pp.10023~ (2004)
- K. R. Park, "Preparation of PFA-g-polystyrene sulfonic acid membranes by the-radiation grafting of styrene onto PFA films", Reactive & Functional Polymers, 65, pp.47~ (2005)
- J. Chen, "Chemical and radiation crosslinked polymer electrolyte membranes prepared from radiation-grafted ETFE films for DMFC applications", J. Power Sources, 158, pp.69~ (2006)
- J. H. Choi, "Preparation and Characterization of Poly(styrenesulfonic acid)-grafted Fluoropolymer Membrane for Direct Methanol Fuel Cell", Korean Membrane J, 9, pp.52~ (2007)
- 원종웅, "불소고분자의 최근 개발 동향", 고분자 과학과 기술, 13, pp.724~ (2002)
- 강세구, "Bar-Coating 방법으로 제조한 직접메탄올 연료전지 MEA의 성능", 전기화학회지, 11(1), pp.16~21 (2008), 한국전기화학회
- M. M. Nasef, "PSSA pore-filled PVDF membranes by simultaneous electron beam irradiation: Preparation and transport characteristics of protons and methanol", J.Membr. Sci, 268, pp.96~ (2006)
- R. Jiang, "Composite silica", Nafion membranes prepared by tetraethylothosilicate solgel reaction and solution casting for direct methanol fuel cells, 2005, pp.272, 116~
- C. A. Schiller, "Relaxation impedance as a model for the deactivation mechanism of fuel cells due to carbon monoxide poisoning", Phys. Chem. Chem. Phys, 3, pp.2113~ (2001)
- R. P. O'hayre, "Fuel cell fundamentals" (2006), John Wiley & Sons