탄소나노튜브의 열처리에 따른 고분자전해질연료전지용 촉매의 표면처리 및 담지특성 향상
Improvement of Catalyst Supporting Characteristic on MWCNTs with Different Thermal Treatment for PEMFC
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
본 연구에서는 탄소나노튜브를 담지체로 사용하여 연료전지용 백금(Pt) 촉매의 고분산, 고담지를목적으로 하였다. 탄소나노튜브의 표면처리는 열적산화방식으로 전처리하였다. 25, 50, 90 및110℃에서 열처리를 하였을 경우, 온도변화에 따른 작용기의 영향을 FT-IR, XPS를 통해 분석하였다. XPS를 통해 전처리의 온도가 증가할수록 작용기의 농도가 증가하는 것을 확인 하였으며,TGA와 TEM을 통해 Pt의 담지량과 분산도 또한 증가한 것을 확인하였다. 산화과정에서 열적거동은 고담지 Pt 촉매의 제조와 밀접한 관련이 있으며, 본 연구에서 제조된 촉매의 고분산, 고담지에 적절한 합성 온도는 90℃로 관찰되었으며 단위전지에서 가장 좋은 성능을 나타내었다.
Abstract
In this study, carbon nanotubes were used as supporter to get high dispersion and high loading of Pt for PEMFC. Thermal oxidation method was applied to carbon nanotubes surface treatment. FT-IR and XPS were used to measure the effect of temperature on functional group. The increased concentration of functional groups was confirmed by XPS analysis, and increased Pt loading and dispersion was also observed by TGA and TEM analysis with increased temperature. Thermal behavior of oxidation is closely related to the manufacture of highly dispersed Pt/MWCNTs. Pt/MWCNTs treatment temperature at 90℃, showed high dispersion and high loading of Pt, and also showed good cell performance.
참고문헌 (20)
- K. Kordesch, "Cells and theirApplications" (1996), Wiley
- C. M. Lai, "Contribution of Nafion loading to the activity ofcatalysts and the performance of PEMFC", Int. J. HydrogenEnergy, 33, pp.4132~ (2008)
- R. R. Passos, "Studiesof the performance of PEM fuel cell cathodes with thecatalyst layer directly applied on Nafion membranes", Electrochim. Acta, 51, pp.5239~ (2006)
- S. Gottesfeld, , New Trends Electrochem.Technol, 1, pp.487~ (2000)
- R. Hockaday, "Micro-Fuel CellsTM forportable electronics’", Fuel Cells Bull, 10, pp.9~ (1999)
- W. Li, "Homogeneous and controllable Pt particles depositedon multi-wall carbon nanotubes as cathode catalyst fordirect methanol fuel Cells’", Carbon, 42, pp.436~ (2004)
- W. Li, "Carbon nanotubes as support for cathodecatalyst of a direct methanol fuel cell", Carbon, 40, pp.787~ (2002)
- W. Li, "Preparation and characterization of MultiwalledCarbon Nanotube-Supported Platinum for Cathode Catalystsof Direct Methanol Fuel Cells", J. Phys. Chem. Bulletin, 107, pp.6292~ (2003)
- K. I. Han, "Studies on the anode catalysts of carbonnanotube for DMFC", Electrochim. Acta, 50, pp.791~ (2004)
- R. Yu, "Platinum Deposition on Carbon Nanotubes via ChemicalModication’", Chem. Mater, 10, pp.718~ (1998)
- V. Parry, "XPS investigations of the proton exchangemembrane fuel cell active layers aging: Characterizationof the mitigating role of an anodic CO contamination oncathode degradation", J. Power sources, 196, pp.2530~ (2011)
- R. V. Hull, "PtNanoparticle Binding on Functionalized MultiwalledCarbon Nanotubes’", Chem. Mater, 18, pp.1780~ (2006)
- R. Yudianti, "Thermal Behaviorof Purified Multi Walled Carbon Nanotube’", J. AppliedSciences, 10, pp.1978~ (2010)
- C. C. Chien, "Effective preparation ofcarbon nanotube-supported Pt-Ru electrocatalysts", MaterialsChemistry and Physics, 99, pp.80~ (2006)
- D. Q. Yang, "XPSDemonstration of π−π Interaction between BenzylMercaptan and Multiwalled Carbon Nanotubes and TheirUse in the Adhesion of Pt Nanoparticles’", Chem. Mater, 18, pp.5033~ (2006)
- H. S. Oh, "Effect ofchemical oxidation of CNFs on the electrochemical carboncorrosion in polymer electrolyte membrane fuel cells", Int.J. Hydrogen Energy, 33, pp.701~ (2010)
- M. S. A. Rahaman, "‘A reviewof heat treatment on polyacrylonitrile fiber’", Polym. Degrad.Stabil, 92, pp.1421~ (2007)
- S. Dalton, "Thermal stabilizationof polyacrylonitrile bres", Polymer, 40, pp.5531~ (1999)
- 임대순, "Sliding wear of silicon carbide modified by etching with chlorine at various temperatures", Wear, 266, pp.214~219, Elsevier
- N. Ikeo, "“Handbookof X-ray Photoelectron Spectroscopy" (1991), JEOL