리튬 이차전지의 흑연 음극에 형성된 표면피막의 열적 안정성
Thermal Stability of Surface Film Formed on a Graphite Negative Electrode in Lithium Secondary Batteries
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
투과형 전자 현미경과 전기화학 임피던스 분광법을 이용하여 리튬 이차전지의 흑연 음극에 생성되는 표면피막의 고온 안정성을 고찰하였다. 투과형 전자 현미경을 이용한 분석에 의해 60oC에서 저장되는 동안 표면피막의 일부가 전해질 용액 중에 용해되는 것이 확인되었으며, 이 과정에서 피막의 두께 감소 및 피막의 형상이 다공성 구조로 변하였다. 한편, 이 과정에서 피막의 조성 변화에 기인하는 것으로 추측되는 표면피막의 저항 증가가 전기화학 임피던스 분광법에 의하여 확인되었다. 표면피막의 고온 안정성은 vinylene carbonate, 1,3-propane sultone, etylene sulfite와 같은 첨가제에 의해 제한적으로 개선되었다.
Abstract
The stability at elevated temperatures of a surface film formed on a graphite electrode in lithium secondary batteries was investigated by transmission electron microscopy (TEM) and electrochemical AC impedance spectroscopy (EIS). TEM analysis revealed that the surface film partly dissolved in the electrolyte solution during storage at 60℃, resulting in a decrease in the thickness of the surface film and a change in its morphology to a porous structure. On the other hand, an increase in the impedance of the surface film which is attributable to a change in composition of the surface film was confirmed by EIS analysis during the storage at 60℃. It was also shown that the addition of vinylene carbonate or 1,3-propane sultone or etylene sulfite, even if limited, improves the stability of the surface film at elevated temperatures.
참고문헌 (23)
- J. R. Dahn, "Phase-diagram of LixC6’", Phys. Rev, 44, pp.9170~ (1991)
- T. Ohzuku, "Formaion oflithium-graphite intercalation compounds in nonaqueouselectrolytes and their application as a negative electrodefor lithium ion (shuttlecock) cell’", J. Electrochem. Soc, 140, pp.2490~ (1993)
- Z. Jiang, "Theelectrochemical intercalation of Li into graphite in Li", polymer electrolyte, J. Electrochem. Soc, pp.1995, 142[DOI]
- M. Inaba, "In situ Raman study on electrochemicalLi intercalation into graphite’", J. Electrochem. Soc, 142, pp.20~ (1995)
- R. Yazami, "Some aspects on theppeparation, structure and physical and electrochemicalproperties of LixC6’", J. Power Sources, 39, pp.43~44 (1993)
- E. Peled, "Handbook of Battery Materials" (1999), Wiley-VCH
- E. Peled, "The electrochemical behavior of alkali andalkaline earth metals in nonaqueous battery systems? Thesolid electrolyte interphase Model", J. Electrochem. Soc, 126, pp.2047~ (1979)
- Z. Ogumi, "Pyrolysis", gaschromatography, J. PowerSources, pp.2001, 156[DOI]
- D. Bar-Tow, "A study of highlyoriented pyrolytic graphite as a model for the graphiteanode in Li-ion batteries’", J. Electrochem. Soc, 146, pp.824~ (1999)
- E. Pled, "Composition, depth profiles and lateraldistribution of materials in the SEI built on HOPG-TOFSIMS and XPS studies", J. Power Sources, 52, pp.97~98 (2001)
- C. Menachem, "Characterization of modified NG7 graphite as an improvedanode for lithium-ion batteries", J. Power Sources, 68, pp.277~ (1997)
- E. Peled, "An advanced tool for the selection of electrolytecomponents for rechargeable lithium batteries", J.Electrochem. Soc, 145, pp.3482~ (1998)
- O. Chusid (Youngman), "Electrochemical and spectroscopic studiesof carbon electrodes in lithium battery electrolyte systems", J. Power Sources, 47, pp.43~44 (1993)
- Y. Ein-Eli, "The dependence of the performanceof Li-C intercalation amodes for Li-ion secondary batterieson the electrolyte solution composition’", Electrochim.Acta, 39, pp.2559~ (1994)
- D. Aurbach, "The correlation between thesurface chemistry and the performance of Li-carbonintercalation snodes for rechargeable rocking-chair typebatteries’", J. Electrochem. Soc, 141, pp.603~ (1994)
- D. Aurbach, "The study of electrolytesolutions based on ethylene and diethyl carbonates forrechargeable Li batteries", J. Electrochem. Soc, 142, pp.2882~ (1995)
- M. Inaba, "Surface film formation on graphitenegative electrode at elevated temperatures", Electrochemistry, 71, pp.1132~ (2003)
- M. Inaba, "Atomic force microscopy study on the stabilityof a surface film formed on a graphite negative electrodeat elevated temperatures", Langmuir, 20, pp.1348~ (2004)
- A. Funabiki, "AC impedanceanalysis of electrochemical lithium intercalation into highlyoriented pyrolytic graphite", J. Power Sources, 68, pp.227~ (1997)
- M. Itagaki, "Electrochemical impedance ofelectrolyte", electrode interfaces of lithium-ion rechargeablebatteries: Effects of additives to the electrolyte on negativeelectrode, 2006, pp.51, 1629~
- G. H. Grodnigg, "Propylene sulfite as film-forming electrolyteadditive in lithium ion batteries’", J. Power Sources, 592, pp.97~98 (2001)
- M. Xu, "Effect of propane sultoneon elevated temperature performance of anode and cathodematerials in lithium-ion batteries’", J. Power Sources, 193, pp.804~ (2009)
- B. T. Yu, "A studyon sulfites for lithium-ion battery electrolytes’", J. PowerSources, 158, pp.1373~ (2006)