테이프 점착면 상 잠재지문의 현출 전 처리방법
Preprocessing Methods for Developing Latent Fingerprints on the Adhesive-sides of Tapes
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
접착 테이프 3종을 대상으로 테이프의 비점착면과 점착면에 잠재지문이 각각 유류되어 있는 경우, 점착면 테이프 분리 방법으로 ① 인위적인 방법, ② 현재의 박리제 사용방법 및 ③ 새로운 방법인 질소 건 사용방법 등 3가지 전처리 방법으로 점착면을 분리하여 잠재지문 현출효율을 각각 확인하였다. 테이프 3종의 비점착면에 3가지 방법을 이용하여 분리한 경우에는 모두 점착면 분리가 가능하였지만, ①인위적인 방법과, ② 현재 사용되고 있는 박리제 전처리 방법에 비교하여, ③ 새로운 방법인 질소 건을사용한 방법이 특징점 수가 약 2배 정도 뛰어난 것으로 확인되었다. 그러나, 점착면에 유류된 잠재지문을 분리 후 현출하는 경우, ② 박리제를 사용한 방법에서는 분리와 지문형태 식별은 가능하지만, ① 인위적인 방법과, ③ 질소 건을 사용한 방법은 테이프 점착면 분리가 불가능하였다.
Abstract
This study conformed the developing efficiency of preprocessing method for separation latentfingerprint from adhesive surface for three kinds of adhesive tapes, by means of ① pressure, ② remover (Undu),③ Liquid Nitrogen Spray as a new method. In case of separating latent finger print on the adhesive surfacefrom the non-adhesive surface for three kinds of tapes. All three methods were possible to separate the adhesivesurface from the non-adhesive surface. The minutia number of ③ Liquid Nitrogen spray as a new mothedwas twice as likely as ① pressure, ② remover (Un-du). But, In case of separating latent fingerprint on theadhesive surface from the adhesive surface for three kinds of tapes, the way of using ② remover (Un-du)was possible to separate the adhesive surface and identify the shape of fingerprint, and the other ways wereimpossible to separate the adhesive surface of tapes.
참고문헌 (9)
- 김만기, "잠재지문 현출효율 평가에 대한 연구", 분석과학, 22(2), pp.166~171 (2009), 한국분석과학회
- 최미정, "유지문 현출법에 관한 연구", 분석과학, 23(1), pp.89~96 (2010), 한국분석과학회
- James A Bailey, "Use of nitrogen cryogun for separating duct tape and recovery of latent fingerprints with a powder suspension method", Forensic Science International, 210, pp.170~173 (2011)
- JW Bergeron, "Use of liquid nitrogen to separate adhesive tapes", J Forensic Ident, 59(1), pp.7~25 (2009)
- B Campbell, "Separation of adhesive tapes", J Forensic Ident, 41(2), pp.102~106 (1991)
- 김동복, "아크릴산 함량 및 무기물 충전제가 UV 경화형 아크릴 점착테이프의 물성에 미치는 영향", 폴리머, 37(2), pp.184~195 (2013), 한국고분자학회[DOI]
- HJ Kim, "Korea Silicone Adhesive Tape", The Society of Adhesion And Interface, 3, pp.57~59 (2002)
- HJ Kang, "A study on development of latent fingerprint using cyano-acrylate fuming", Korean J Sci Criminal Invest, 3(2), pp.130~136 (2009)
- 한원흠, "접착 테이프 박리거동에 미치는 외부효과에 관한 연구", 접착 및 계면, 13(1), pp.9~16 (2012), 한국접착및계면학회
