본문 바로가기
KERD
논문KCI 등재

2차원 수리해석에 의한 하천 제방 위험도 평가분석

Hazard Evaluation of Levee by Two-Dimensional Hydraulic Analysis

2

조회

0

다운로드

2

인용

0

참고문헌

키워드

주제분류기타자연과학

초록

실무에서 사용되고 있는 제방의 안전도 평가는 여러 가지 붕괴원인 중 하나의 요인에 대해서만 평가를 하거나 주로 제방의 물리적인 특성을 이용한 1차원 수리분석을 통한 평가에 국한되어 왔다. 하지만 이러한 평가기법들은 제방의 다양한 붕괴원인을 동시에 고려할 수 없으며, 정확한 지형정보를 필요로 하는 곳에서 신뢰도가 떨어지는 문제점을 안고 있다. 따라서 본 논문에서는 정확한 지형정보를 반영한 2차원 수리해석을 결과를 이용하여 제방의 다양한 붕괴원인인 월류, 침투, 침식위험도를 동시에 고려한 제방 위험도 지수를 제안하였다. 낙동강 유역의 주요 합류부에 대해 하천준설사업 전·후의 지형 변화를 고려하여 2차원 수리모형을 이용한 수리해석을 실시하고 그 결과를 통해 제방 위험도를 평가하였다. 본 연구는 정확한 하천의 형상을 반영한 수리해석 결과를 이용한 객관적이고 신뢰도 높은 제방위험도 평가에기여할 수 있을 것으로 기대된다.

Abstract

Levee safety is being evaluated using one of the several failure causes including overtopping, infiltration and erosion or 1D hydraulic analysis considering physical characteristics of levee in practical engineering works. However, mentioned evaluation methods are not able to consider various failure causes of levee at the same time and to get reliable results where requires the accurate topographic information. This study proposed the flood hazard index which is able to consider several hazard factors involving overtopping, infiltration and erosion risk simultaneously. The index was generated from results of 2D hydraulic analysis reflecting accurate topographic information. The study areas are the confluences of the Nakdong River and two streams(Gamcheon and Hoecheon). Levee safety was evaluated using results based on 2D hydraulic analysis considering riverbed changes of before and after dredging work in the study area. This study will contribute to estimate the reliable safety evaluation of levee where may have hazards during extreme flood events.

참고문헌 (21)

  1. 안기홍, "신뢰도 지수를 적용한 하천제방의 위험도 평가", 한국수자원학회 논문집, 42(7), pp.547~558 (2009), 한국수자원학회
  2. Bogadi, I, "Effects of stochastic model choice hydraulic design", Proc. 2nd IAHR Int. Symp. on Stochastic Hydraulics (1976)
  3. Brizendine, AL, "Risk-based analysis of levees", Ph.D, pp.1997
  4. Calle, EOF., "Probabilistic analysis of piping underneath water retaining structures", Proc. 12th Int. Conference on Soil Mechanics and Foundation Engineering, 2, pp.819~822 (1989)
  5. Hicks, FE, "Comparison of finite element methods for the St.Venant equations", International J. for Numerical Methods in Fluids, 20(230), pp.99~113 (1995)
  6. 강태운, "제방형상과 홍수파형에 의한 제방의 파이핑 안정성 평가", 한국수자원학회 논문집, 47(4), pp.307~319 (2014), 한국수자원학회
  7. Lee, SJ, "Comparison of safety evaluation techniques for levees", The Conference of Korea Society of Civil Engineers, pp.612~615 (2002)
  8. Lee, SJ, "Application of safety assessment techniques for levees", The Conference of Korea Society of Civil Engineers, pp.2606~2611 (2003)
  9. Meer, MT, "Comparison of the dutch and american levee safety approach", 2009ASFPM Conference Orlando USA, pp.59~68 (2009)
  10. Nardo M, "Tools for composite indicators building, European Commission", EUR 21682 EN, pp.44~52 (2005), Joint Research Centre
  11. 박재홍, "수치모형을 이용한 하천제방 설계인자 검토", 한국방재학회논문집, 11(6), pp.259~268 (2011), 한국방재학회
  12. Peter, p, "Canal and River Levees" (1982), Elsevier Scientific Publishing Company
  13. Shim, JW, "A study on overtopping risk of levee by using 2-D numerical model", Master, pp.2008
  14. 송주일, "도시하천의 복원과 관리를 위한 하천평가기법 개발", 대한토목학회 논문집B, 28(3B), pp.283~296 (2008), 대한토목학회
  15. Steenbergen, HMGM, "Reliability analysis of flood defence system", HERON, 49(1), pp.51~73 (2004)
  16. Termaat, R.J., "Short term acceptable risk of slope failure of levees", Proc. of the 13th Int. Conference on Soil Mechanics and Foundation Engineering (1994)
  17. Optimal Risk-Based Design of Water Resource Engineering Projects, "Tung, Y.K.", Center for Research in Water Resources, University of Texas, ~, pp.Tech. Report CRWR-171 (1980)
  18. Tung, Y.K., "Optimal risk-based hydraulic design of flood levee systems", Water Resources Research, AGU, 17(4), pp.843~852 (1981)
  19. Tung, Y. K., "Effects of uncertainties on optimal risk-based design of hydraulic structures", J. of Water Resources Planning and Management Division, 113(5), pp.709~722 (1987), ASCE
  20. Wang, SSY, "Finite Element in Fluids 8", pp.457~478 (1992), Hemisphere Publishing Corp
  21. Yoon, KS, "Levee failure type analysis and design methods", J. of Korea Water Resources Association, 37(5), pp.50~60 (2004)

관련 논문AI추천

이 간행물의 다른 논문 (12건)