핑거접합부의 수량 및 배치가 생태목조건축용 집성재의 휨강도에 미치는 영향
The Effects of Number and Location of Finger Joints on the Bending Strength of Glue Laminated Wood for Green Wood Building
2
조회
0
다운로드
2
인용
0
참고문헌
초록
Abstract
This experiment was carried out to investigate the effects of number and location of finger joints on the bending strength of glue-laminated lumbers. Urea resin adhesives were used in this experiment and the resin content was 70% for cold pressing. The lamina were edge-jointed and end-jointed. The specimen were composed of one or three layers.The obtained results are summarized as follows; The effects of finger joints on the decrease of bending strength of glue laminated woods were different according to the number and location of finger joints. The decrease of MOR was highest on the middle position of laminated woods. The effects of several arrangements of finger joints on the bending strength of glue laminated woods showed on Figure 7 and 8. The variance of thickness-laminating on the bending strength of glue laminated woods were larger than those of width-laminating.
참고문헌 (10)
- 신동소, "합판파티클보드집성재섬유판", pp.100~103 (1999), (주)금영에드킴
- 한국산업규격 KSF 2208, "목재의 휨시험방법" (2004), 한국산업규격 KSF 2208
- 한국산업규격 KSM 3701, "요소수지 목재접착제" (2002), 한국산업규격 KSM 3701
- 한국산업규격 KSF 3023, "핑거조인트 목재" (2004), 한국산업규격 KSF 3023
- A, "Mechanics of wood and wood composites", pp.87~126 (1982), Van Nostrand Reinhold Company
- Clark, "Measurement of 'speed of set' of room temperature setting wood adhesives", pp.52~53 (1968)
- Gillespie, "Adhesives in building construction", pp.73~83 (1978)
- Park, "Effects of adhesion conditions on bonding strength of pitch pine woods for glued-laminated wood", pp.48~53 (1988)
- So, "Gluing characteristics of urea and phenol-resorcinol resin adhesives on the pitch pine lumber Theses Collection of Chonnam University", pp.85~91 (1988)
- "スロ-プトフィンガジョイント材の曲げおよび引張り强度性能に及ぼすスロ-プ比および接着劑の影響", pp.462~46 467 (1991)