Color Degradation, Hardness and Abrasion Resistance of Coated Black Cherry Lumber
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In this study, the coating properties and surface performance of exotic cherry wood (Prunus serotina) were estimated, reviewing color difference, hardness and abrasion resistibility in order to evaluate probability as construction interior members such as wall and floor. The reduction effect of color difference was represented in the order of water soluble color stain, water soluble transparent stain, and non-coated lumber. However, the tendency of distinct difference according to wood grain pattern was not found. The wavy grain lumber showed better properties in hardness and resistance to abrasion than quarter grain. In conclusion, it was supposed that the application of wavy grain lumber in wall and floor as interior materials would be acceptable in practicality.
Abstract
In this study, the coating properties and surface performance of exotic cherry wood (Prunus serotina) were estimated, reviewing color difference, hardness and abrasion resistibility in order to evaluate probability as construction interior members such as wall and floor. The reduction effect of color difference was represented in the order of water soluble color stain, water soluble transparent stain, and non-coated lumber. However, the tendency of distinct difference according to wood grain pattern was not found. The wavy grain lumber showed better properties in hardness and resistance to abrasion than quarter grain. In conclusion, it was supposed that the application of wavy grain lumber in wall and floor as interior materials would be acceptable in practicality.
참고문헌 (7)
- "American Society for Testing and Materials D 785-93; Standard test methods for Rockwell hardness of plastics plastics and electrical insulating materials", ~
- "American Society for Testing and Materials D 4060-95; Standard test method for abrasion resistance of organic coatings by the Taber abraser", ~
- Carter, R. M, "Finishing Eastern Hardwoods", pp.241~ (1983), Forest Products Research Society
- Gang, H. Y, "Changes due to heat treatment of wood ash", Korea Furniture Society. Conference, pp.78~80 (2006)
- Kim, J. I., "Surface Properties of Wood-Based Floorings for Under Heating Systems (Ondol)", Korea Furniture Journal, 13(1), pp.27~37 (2002)
- Kim, H. M., "Effect of Gamma-ray Irradiation on Hardness Property of Ultra-HighMolecular Weight Polyethylene for the AdvancedWear Resistance of Artificial Joint", Society of Mechanical Engineers Symposium Proceedings, pp.301~305 (2008)
- Forest Service, "production use of forest products – 6. Wood coloring techniques", Forests and Forestry Technology IV, pp.141~155 (2000)