Gypsum-Wood의 제조와 성질
Manufacture and Properties of Gypsum-Wood
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
Gypsum-wood composites were made by introducing inorganic substances into wood using calcium chloride, first treating solution, and sodium sulfate, secondary treating solution, by double diffusion process under atmospheric pressure at room temperature. The process conducted as follows: water saturated specimens were soaked in calcium chloride solutions at several concentration. Then the specimens were soaked further in saturated sodium sulfate solution, and they were leached in flowing tap water for 24h. To attain sufficient weight percent gain (WPG) values, the suitable concentration of calcium chloride and soaking time in saturated sodium sulfate solution were 20% and 48h, respectively. Inorganic substances were produced mainly in the lumina of tracheides. It was made sure that these substances were dihydrate gypsum(CaSO4 2H2O) by X-ray microanalysis (SEM-EDX). The composites had good fire resistance due to low heat transfer rate of gypsum formed in wood. However, the composites had little decay resistances, because they showed high weight losses by test fungi attacks.
Abstract
Gypsum-wood composites were made by introducing inorganic substances into wood using calcium chloride, first treating solution, and sodium sulfate, secondary treating solution, by double diffusion process under atmospheric pressure at room temperature. The process conducted as follows: water saturated specimens were soaked in calcium chloride solutions at several concentration. Then the specimens were soaked further in saturated sodium sulfate solution, and they were leached in flowing tap water for 24h. To attain sufficient weight percent gain (WPG) values, the suitable concentration of calcium chloride and soaking time in saturated sodium sulfate solution were 20% and 48h, respectively. Inorganic substances were produced mainly in the lumina of tracheides. It was made sure that these substances were dihydrate gypsum(CaSO4 2H2O) by X-ray microanalysis (SEM-EDX). The composites had good fire resistance due to low heat transfer rate of gypsum formed in wood. However, the composites had little decay resistances, because they showed high weight losses by test fungi attacks.
참고문헌 (7)
- 윤선미, "탄산칼륨과 염화칼슘을 이용한 무기질 복합화 목재 중에 있어서 무기염의 생성과 방부효력", 목재공학, 29(2), pp.126~132 (2001)
- Furuno T, "Combinations of wood and silicate II. Wood-mineral composites using water glass and reactants of barium chloride, boric acid, and their properties", Mokuzai Gakkaishi, 38(5), pp.448~457 (1992)
- Furuno T, "Combinations of wood and silicate I. Impregnation by water glass and applications of aluminum sulfate and calcium chloride as reactants", Mokuzai Gakkaishi, 37(5), pp.462~472 (1991)
- Yamaguchi H, "Preparation and physical properties of wood fixed with silicic acid compounds", Mokuzai Gakkaishi, 40(8), pp.838~845 (1994)
- 長倉三郞, "佐藤文隆, 久保亮五", pp.170~ (1998), 岩波 理化學辭典
- 村山敏博, "Plastic Age", 24(12), pp.115~ (1978)
- 角田邦夫, "無機質複合化による新機能性木材の開發（5）:處理條件と生物劣化抵抗性", pp.357~ (1990), ４０會日本木材學會大會硏究發表要旨集