Green Adhesives Using Tannin and Cashew Nut Shell Liquid for Environment-friendly Furniture Materials
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Sick building syndrome symptoms that are experienced by building occupants may be caused by toxic substances such as formaldehyde and VOCs, which are known to be emitted from building materials and wood composite products such as wood-based panel, furniture, engineered flooring and construction adhesive. In Korea, the use of wood composite products for indoor environments has increased over the last decade. Recently, wood composite products have been installed in approximately 95% of newly constructed residential buildings. The use of these products has resulted in problems related to human health, and consequently a realization about the importance of indoor air quality. In addition, consumer demand is increasing for natural materials because conventional building materials and wood composite products are made by adding urea-formaldehyde resin or they contain formaldehyde-based resin. More recently, many efforts have been made to reduce formaldehyde emission from building materials that laid in the indoor environment. Especially, if conventional formaldehyde-based adhesives are replaced with green adhesives for residential spaces, it is possible to reduce most of the emission amounts of formaldehyde in indoor environments. In line with this expectation, many researches are being conducted using natural materials such as tannin and cashew nut shell liquid (CNSL). This study discussed the affects and possibilities of green adhesives to reduce formaldehyde emission in indoor environments.
Abstract
Sick building syndrome symptoms that are experienced by building occupants may be caused by toxic substances such as formaldehyde and VOCs, which are known to be emitted from building materials and wood composite products such as wood-based panel, furniture, engineered flooring and construction adhesive. In Korea, the use of wood composite products for indoor environments has increased over the last decade. Recently, wood composite products have been installed in approximately 95% of newly constructed residential buildings. The use of these products has resulted in problems related to human health, and consequently a realization about the importance of indoor air quality. In addition, consumer demand is increasing for natural materials because conventional building materials and wood composite products are made by adding urea-formaldehyde resin or they contain formaldehyde-based resin. More recently, many efforts have been made to reduce formaldehyde emission from building materials that laid in the indoor environment. Especially, if conventional formaldehyde-based adhesives are replaced with green adhesives for residential spaces, it is possible to reduce most of the emission amounts of formaldehyde in indoor environments. In line with this expectation, many researches are being conducted using natural materials such as tannin and cashew nut shell liquid (CNSL). This study discussed the affects and possibilities of green adhesives to reduce formaldehyde emission in indoor environments.
참고문헌 (31)
- Moubarika, A, "Cornstarch and tannin in phenol– formaldehyde resins for plywood production", Industrial Crops and Products, 30, pp.188~193 (2009)
- Biswas, B. K., "Preparation and characterization of CNSL modified phenol formaldehyde resin", J. Polym. Mater, 28, pp.7~15 (2009)
- Batubenga, D. B., "Isocyanate", phenolics wood adhesives by catalytic acceleration of copolymerization, 1995, pp.49, 84~86
- Bisanda E. T. N, "Properties of sisal-CNSL composites", J Mater Sci, 27, pp.1690~1700 (1992)
- Papadopoulou, E, "Thermal study of phenol - formaldehyde resin modified with cashew nut shell liquid", Thermochimica Acta, 512, pp.105~109 (2011)
- Bisanda, E. T. N., "Characterisation of tannin resin blends for particle board applications", Cement & Concrete Composites, 25, pp.593~598 (2003)
- Ciannamea, E. M., "Medium-density particleboards from modified rice husks and soybean protein concentrate- based adhesives", Bioresource Technology, 101, pp.818~825 (2010)
- Bhunia, H. P., "Synthesis and characterization of polymers from cashewnut shell liquid (CNSL)", European Polymer Journal, 35, pp.1381~1391 (1999)
- Bhunia, H. P., "Synthesis of polyurethane from cashew nut shell liquid (CNSL), a renewable resource", J. Polym. Sci. Polym. Chem, 36, pp.391~400 (1998)
- Hodgson, M, "Indoor environmental exposures and symptoms", Environ. Health Perspect, 110, pp.663~667 (2002)
- Kelly, T. J., "Emission rates of formaldehyde from materials and consumer products found in California homes", Environmental Science & Technology, 33, pp.81~88 (1999)
- Mwaikambo, L. Y, "Hemp fibre reinforced cashew nut shell liquid composites", Composites Science and Technology, 63, pp.1297~1305 (2003)
- Ping, L., "Condensed tannins extraction from grape pomace: Characterization and utilization as wood adhesives for wood particleboard", Industrial Crops and Products, 34, pp.907~914 (2011)
- Lee, S.-W., "Subacute toxicity evaluation in rats exposed to concrete and hwangto building environments", Environ. Toxicol, 22, pp.264~274 (2007)
- Lubi, C, "Studies on Metalto- Metal Adhesives Based on CNSL Resins", Polymer- Plastics Technology and Engineering, 45 (2006)
- Menzies, D, "Building related illnesses", New Eng. J. Med, 337, pp.1524~1531 (1997)
- Otson, R, "Characterization and cycling, in Gaseous pollutants", pp.335~421 (1992), John Wiley and Sons
- Mahanwar, P. A, "Effect of cashew nut shell liquid (CNSL) on properties of phenolic resins", Journal of Applied Polymer Science, 61, pp.2107~2111 (1996)
- Pickrell, J. A., "Formaldehyde release rate coefficients from selected consumer products, in Symposium series, formaldehyde release from wood products", American Chemical Society Symposium Series, 385, pp.40~51 (1986)
- Pizzi, A., "Wood adhesives-chemistry and technology" (1983), Marcel Dekker Inc
- Pizzi, A, "Recent developments in eco-efficient bio-based adhesives for wood bonding: opportunities and issues", J. Adhesion Sci. Technol, 20, pp.829~846 (2006)
- Ikeda, R., "A new crosslinkable polyphenol from a renewable resource", Macromol. Rapid Commun, 21, pp.496~499 (2000)
- Park, S. Y., "Polymer synthesis by enzyme catalysis", Polym. Sci. Technol, 16, pp.342~353 (2005)
- equipment & IAQ health impacts, prevention & mitigation. Indoor Air Quality Update, "Office furnishings", pp.1992, Schmidt-Etkin, D
- Kim, S, "Environment-friendly adhesives for surface bonding of wood-based flooring using natural tannin to reduce formaldehyde and TVOC emission", Bioresource Technology, 100, pp.744~748 (2009)
- Kim, S, "The reduction of formaldehyde and VOCs emission from wood-based flooring by green adhesive using cashew nut shell liquid (CNSL)", Journal of Hazardous Materials, 182, pp.919~922 (2010)
- Tabarsa, T., "Mechanical and physical properties of wheat straw boards bonded with a tannin modified phenol– formaldehyde adhesive", Composites: Part B, 42, pp.176~180 (2011)
- Vazquez, G., "Effect of veneer side wettability on bonding quality of Eucalyptus globules plywoods prepared using a tannin - phenol - formaldehyde adhesive", Bioresour. Technol, 87, pp.349~353 (2003)
- Wen, J. L, "Properties of resorcinol - tannin - formaldehyde copolymer resins prepared from the bark extracts of Taiwan acacia and china fir", Biores. Technol, 97, pp.257~264 (2006)
- Kim, Y. H., "Enzymatic epoxidation and polymerization of cardanol obtained from a renewable resource and curing of epoxide-containing polycardanol", J. Mol. Catal. B: Enzym, 45, pp.39~44 (2007)
- Yu, C, "A review of the emission of VOCs from polymeric materials used in buildings", Building and Environment, 33, pp.357~374 (1998)