유비쿼터스 기술을 위한 고속철도상 Pre-Stressed Concrete(PSC) 교량받침의 누적수평이동거리에 관한 수치해석
Numerical Analysis of Accumulated Sliding Distance of Pre-Stressed Concrete (PSC) Bridge Bearing for High-Speed Railway for Ubiquitous Technology
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Numerical analysis of PSC box bridge bearings for high speed KTX train vehicles has been carried out as a virtual simulation for Ubiquitous Technology. Improved numerical models of bridge, vehicle and interaction between bridge and train are considered, where bending and torsional modes are provided, whereas the exist UIC code is applied by the simplified HL loading. Dynamic and static analysed results are compared to get Dynamic Amplification Factors (D. A. F.) for maximum deflections and bending stresses up to running speed of 500 km/h. Equation from the regression analysis for the D. A. F. is presented. Sliding distance of the bearings for various KTX running speeds is compared with maximum and accumulated distances by the dynamic behaviors of PSC box bridge. Dynamic and static simulated sliding distances of the bearings according to the KTX running speed are proved as a major parameter in spite of the specifications of AASHTO and EN1337-2 focused on the distance by temperature variations.
Abstract
Numerical analysis of PSC box bridge bearings for high speed KTX train vehicles has been carried out as a virtual simulation for Ubiquitous Technology. Improved numerical models of bridge, vehicle and interaction between bridge and train are considered, where bending and torsional modes are provided, whereas the exist UIC code is applied by the simplified HL loading. Dynamic and static analysed results are compared to get Dynamic Amplification Factors (D. A. F.) for maximum deflections and bending stresses up to running speed of 500 km/h. Equation from the regression analysis for the D. A. F. is presented. Sliding distance of the bearings for various KTX running speeds is compared with maximum and accumulated distances by the dynamic behaviors of PSC box bridge. Dynamic and static simulated sliding distances of the bearings according to the KTX running speed are proved as a major parameter in spite of the specifications of AASHTO and EN1337-2 focused on the distance by temperature variations.
참고문헌 (7)
- 정세훈, "RFID", USN 기반의 유비쿼터스 제조실행시스템 설계 및 구현, 2010, pp.6(4), 21~31[DOI]
- 노영, "RFID를 활용한 유비쿼터스 컨벤션에 관한 연구", (사)디지털산업정보학회 논문지, 5(3), pp.175~184 (2009), (사)디지털산업정보학회
- 오순택, "고속철 속도변화에 대한 PSC박스 교량의 경간길이 별 동적해석", 한국구조물진단유지관리공학회 논문집, 15(4), pp.204~211 (2011), 한국구조물진단유지관리공학회
- 오순택, "고속철 PSC 박스거더 교량의 통과차량 윤하중 동적해석", 한국방재학회논문집, 11(4), pp.31~39 (2011), 한국방재학회
- 오순택, "개선된 38자유도 차량모델을 이용한 고속철 PSC교량의 동적거동해석", 콘크리트학회 논문집, 22(6), pp.797~803 (2010), 한국콘크리트학회
- Helmut E, "Structural Bearings" (2002), Ernst & Sohn Verlag fur Architektar
- Joh, C. B, "Accumulated Sliding Distance of the Sliding Element in the Bridge Bearing", Proceedings of Korean Society of Civil Engineering, pp.1319~1322