USN응용과 범용목적에 적용가능한 센서 신호처리기
Sensor signal processing device for USN application and general purpose
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In sensor signal conditioning and processing, offset and drift characteristics of an operational amplifier are an important factor when the amplifier is used for a precise sensor signal amplifier. In order to use it in high accuracy, an expensive trimming or a complex compensation circuit is required. This paper presents the improved sensor signal conditioning and processing device for ubiquitous sensor network(USN) application or general purpose by developing a hardware of the circuit for reducing the offset voltage and drift characteristics, and a software for its control and sensor signal processing. We realize better offset voltage and drift characteristics of the signal conditioning circuit using low cost operational amplifiers. The experimental results show that this technique is effective in improving the performance of the sensor signal processing device.
Abstract
In sensor signal conditioning and processing, offset and drift characteristics of an operational amplifier are an important factor when the amplifier is used for a precise sensor signal amplifier. In order to use it in high accuracy, an expensive trimming or a complex compensation circuit is required. This paper presents the improved sensor signal conditioning and processing device for ubiquitous sensor network(USN) application or general purpose by developing a hardware of the circuit for reducing the offset voltage and drift characteristics, and a software for its control and sensor signal processing. We realize better offset voltage and drift characteristics of the signal conditioning circuit using low cost operational amplifiers. The experimental results show that this technique is effective in improving the performance of the sensor signal processing device.
참고문헌 (13)
- A. Mainwaring, "Wireless sensor networks for habitat monitoring", Proc. of the 1st Int. Workshop. on Wireless Sensor Networks and Applications (2002)
- S. Kim, "Health monitoring of civil infrastructures using wireless sensor networks", Proc. of the 6th Int. Conf. on Information Processing in Sensor Networks (2007)
- 하상민, "센서 신호 처리를 위한 온도 보상 기능을 가진 2단 CMOS 연산 증폭기", 센서학회지, 18(4), pp.280~285 (2009), 한국센서학회
- Walter G. Jung, "Op Amp applications handbook- Analog Device Inc", pp.46~48 (2005)
- "IC Preamplifier challenges choppers on drift', National semiconductor application note 79"[URL]
- Analog Devices, "Chopper Stabilized(Auto -Zero) Precision OP Amps", ~ (2008)
- Walt Kester, "Practical design techniques for sensor signal conditioning -bridge circuits, ch.2-ch3", ~ (1999)
- Creed Huddlestone, "Intelligent Sensor Design, Pressure and load sensor, ch.7", pp.209~218 (2007), Newnes
- 박찬원, "능동 회로에 의해 온도 보상된 이중 빔 로드 셀의 개발", 대한전기학회 논문지, 44(8), pp.1057~1062 (1995)
- 박찬원, "센서신호처리를 위한 다중채널 데이터획득", 로깅 시스템, 2007, pp.16(3), 187~191[DOI]
- Philips, Kathleen, "A", D Conversion for Signal Conditioning Series, The Springer International Series, 2006, pp.874, ~
- IEEE, "Standard for a smart transducer interface for sensors and actuators", ~ (2007)
- 산업자원부 기술표준원, "환경시험방법-항온항습조", ~ (2003)