PVDF/ZnO Nanopillar 복합재료를 이용한 압전필름 스피커의 성능향상
Enhanced Performance of PVDF Piezoelectric Speaker Using PVDF/ZnO Nanopillar Composites
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In this study, we fabricated and evaluated the performance of film speaker using PVDF / ZnO NP composite structure. PVDF piezoelectric films were fabricated and characterized by XRD and SEM. ZnO nanopillars were prepared by hydrothermal synthesis on prepared PVDF piezoelectric films. We analyzed and tested the acoustic signal characteristics of the piezoelectric film. In order to fabricate an acoustic structure with a wide frequency range from low to high frequency, we have fabricated various types of film speakers and investigated the frequency characteristics. As a result, the fundamental piezoelectric properties of PVDF show that the piezoelectric constant due to ZnO NP increases. And the overall acoustic signal level is also increased by 10% or more. We investigated frequency generation from 500 Hz to 10 KHz using different sizes with PVDF / ZnO NP composite film speaker
Abstract
In this study, we fabricated and evaluated the performance of film speaker using PVDF / ZnO NP composite structure. PVDF piezoelectric films were fabricated and characterized by XRD and SEM. ZnO nanopillars were prepared by hydrothermal synthesis on prepared PVDF piezoelectric films. We analyzed and tested the acoustic signal characteristics of the piezoelectric film. In order to fabricate an acoustic structure with a wide frequency range from low to high frequency, we have fabricated various types of film speakers and investigated the frequency characteristics. As a result, the fundamental piezoelectric properties of PVDF show that the piezoelectric constant due to ZnO NP increases. And the overall acoustic signal level is also increased by 10% or more. We investigated frequency generation from 500 Hz to 10 KHz using different sizes with PVDF / ZnO NP composite film speaker
참고문헌 (12)
- 공보현, "합성절차에 따른 1차원 ZnO 나노구조의 형태조절과 특성평가", 전기전자재료학회논문지, 19(1), pp.13~17 (2006), 한국전기전자재료학회
- 변홍정, "스피커 제작기술의 국내외 동향", 전자공학회지, 13(6), pp.513~520 (1986)
- J. Eargle, "Historical Perspectives and Technology Overview of Loudspeakers for Sound Reinforcemen", Journal of the Audio Engineering Society, 52(4), pp.412~432 (2004)
- K. E. Stahl, "Synthesis of loudspeaker mechanical parameters by electrical means : A new method for controlling low frequency loudspeaker behavior", J. Audio Eng. Soc, 29(9), pp.587~596 (1981)
- L. J. Putnick, "Secondary states of vibrating plates", J. Acoustics. Soc. Am., 69(6), pp.1682~1687 (1981)
- Abram R. A, "The theory of a piezoelectric plastic film transducer for earphones", J. Phys. D : Appl. Phys., 13, pp.201~ (1980)
- A. Safari, "Development of piezoelectric composites for transducers for transducer", J. Phys. III France, 4, pp.1129~ (1994)
- P. Indra Devi, "Dielectric studies on hybridised PVDF–ZnO Nanocomposites", J. Experimental Nanoscience, 6(3), pp.281~293 (2011)
- A. Bottino, "Preparation and characterization of novel porous PVDF-ZrO2 composite membranes", Desalination, 146, pp.35~40 (2002)
- E. Venkatragavaraj, "Piezoelectric properties of ferroelectric PZT-polymer composities", J phys. D: Appl. Phys., 34, pp.487~ (2001)
- Behzad Mohammadi, "Effect of tensile strain rate and elongation on crystalline structure and piezoelectric properties of PVDF thin films", Polymer Testing, 26(1), pp.42~50 (2007)
- Muhamad Nasir, "Formation of β-Phase Crystalline Structure of PVDF Nanofiber by Electrospray Deposition: Additive Effect of Ionic Fluorinated Surfactant", Polymer Journal, 39, pp.670~674 (2007)