전사 인쇄에 의한 3D와 다층의 Pt 전극의 CO가스 흡착
CO Adsorption on Three-Dimensional and Multilayered Platinum Electrode Prepared through Transfer Printing
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Three-dimensional (3D) multilayered Pt electrodes were fabricated to develop a porous electrode using a pattern-transfer printing process. The Pt thin films were deposited using a transferred sputtering pattern having a 250 nm line width on the substrate, and the uniformline patterns were efficiently transferred using our proposed method. Temperature-programmed desorption (TPD) analyses were used to evaluate the porosity of the electrodes. It was possible to distinguish between two resolved maxima at 168 and 227oC, which could be described in terms of desorption reactions on the Pt (111) planes. The results of the TPD analysis of the 3D and multilayered Pt electrodes prepared through transfer printing were compared to those of an electrode fabricated through screen printing using a commercialPt-carbon paste commonly used as porous electrodes. It was confirmed that the 3D multilayered electrodes exhibited a desorption concentration approximately 100 times higher than that of the Pt-carbon composite electrode, and the desorption concentration increasedby approximately 0.02 mg/mol per layer. The 3D multilayered electrode effectively functions as a porous electrode and a catalyst.
Abstract
Three-dimensional (3D) multilayered Pt electrodes were fabricated to develop a porous electrode using a pattern-transfer printing process. The Pt thin films were deposited using a transferred sputtering pattern having a 250 nm line width on the substrate, and the uniformline patterns were efficiently transferred using our proposed method. Temperature-programmed desorption (TPD) analyses were used to evaluate the porosity of the electrodes. It was possible to distinguish between two resolved maxima at 168 and 227oC, which could be described in terms of desorption reactions on the Pt (111) planes. The results of the TPD analysis of the 3D and multilayered Pt electrodes prepared through transfer printing were compared to those of an electrode fabricated through screen printing using a commercialPt-carbon paste commonly used as porous electrodes. It was confirmed that the 3D multilayered electrodes exhibited a desorption concentration approximately 100 times higher than that of the Pt-carbon composite electrode, and the desorption concentration increasedby approximately 0.02 mg/mol per layer. The 3D multilayered electrode effectively functions as a porous electrode and a catalyst.
참고문헌 (19)
- H. Wan, "Miniaturized planar room temperature ionic liquid electrochemical gas sensor for rapid multiple gas pollutants monitoring", Sens. Actuators B, 255, pp.638~646 (2018)
- E. M. Hetrick, "Analytical chemistry of nitric oxide", Annu. Rev. Anal, 2, pp.4409~4433 (2009)
- Z. Wang, "Ionic liquids as electrolytes for the development of a robust amperometric oxygen sensor", Anal. Chem, pp.7066~7073 (2011)
- K. I. Tsceng, "Platinum electrodes modified by tin for electrochemical CO Sensors", J. Electrochem, 150(7), pp.H156~H160 (2003)
- Z. Yin, "Facile synthesis of hexagonal single-crystalline ZnCo2O4 nanosheet arrays assembled by mesoporous nanosheets as electrodes for high-performance electrochemical capacitors and gas sensors", Appl. Sci. Surf, 457, pp.1103~1109 (2018)
- H. K. Maleh, "Surface amplification of pencil graphite electrode with polypyrrole and reduced grapheme oxide for fabrication of a guanine", adenine DNA based electrochemical biosensors for determination of didanosine anticancer drug, 2018, pp.441, 55~60
- M. Bijad, "An electrochemical-amplifed-platform based on the nanostructure voltammetric sensor for the determination of carmoisine in the presence of tartrazine in dried fruit and soft drink samples", J. Food Meas. Charact, 12(41), pp.634~640 (2018)
- S. Cheraghi, "A sensitive amplified sensor based on improved carbon paste electrode with 1-methyl-3-octylimidazolium tetrafluoroborate and ZnO", CNTs nanocomposite for differential pulse voltammetric analysis of raloxifene, 2017, pp.420, 882~885
- D. J. Wales, "Gas sensing using porous materials for automotive applications", Chem. Soc, 44, pp.4290~4321 (2015)
- J. Lai, "3D porous carbonaceous electrodes for electrocatalytic applications", Joule, 2(1), pp.76~93 (2018)
- H. Fukuda, "Highly sensitive MISFET sensors with porous Pt–SnO2 gate electrode for CO gas sensing applications", Sens. Actuators B, 64(1-3), pp.163~168 (2000)
- H. Qian, "H2S and SO2 adsorption on Pt-MoS2 adsorbent for partial discharge elimination : A DFT study", Results Phys, 12, pp.107~112 (2019)
- W. Chen, "Atomic layer deposition assisted pattern transfer technology for ultra-thin block copolymer films", Thin Solid Films, 613(31), pp.32~37 (2016)
- D. Qin, "Soft lithography for micro-and nanoscale patterning", Nat. Protoc, 5(3), pp.491~502 (2010)
- L. Zu, "Effect of pore orientation on the catalytic performance of porous NiMo electrode for hydrogen evolution in alkaline solutions", Int. J. Hydrogen Energy, 44(10), pp.4650~4655 (2019)
- K. Foger, "Temperature programmed desorption of carbon monoxide adsorbed on supported platinum catalysts", Appl. Sci. Surf, 2(3), pp.335~351 (1979)
- W. L. Winterrottom, "Application of thermal desorption methods in studies of catalysis-I. Chemisorption of carbon monoxide on platinum", Sci. Surf, 37(1), pp.195~201 (1973)
- S. Dey, "Property and structure of various platinum catalysts for lowtemperature carbon monoxide oxidations", Mater. Today, 16, pp.100228(1)~100228(24) (2020)
- McCabe, "Binding states of CO on single crystal planes of Pt", Sci. Surf., 66(1), pp.101~124 (1977)