IMU 기반 자세 추정 칼만필터에서 공분산 모델링이 추정 정확도에 미치는 영향
Effects of Covariance Modeling on Estimation Accuracy in an IMU-based Attitude Estimation Kalman Filter
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
A well-known difficulty in attitude estimation based on inertial measurement unit (IMU) signals is the occurrence of external acceleration under dynamic motion conditions, as the acceleration significantly degrades the estimation accuracy. Lee et al. (2012) designed a Kalman filter (KF) that could effectively deal with the acceleration issue. Ahmed and Tahir (2017) modified this method by adjusting the acceleration-related covariance matrix because they considered covariance modeling as a pivotal factor in the estimation accuracy. This study investigates the effects of covariance modeling on estimation accuracy in an IMU-based attitude estimation KF. The method proposed by Ahmed and Tahir can be divided into two: one uses the covariance including only diagonal components and the other uses the covariance including both diagonal and off-diagonal components. This paper compares these three methods with respect to the motion condition and the window size, which is required for the methods by Ahmed and Tahir. Experimental results showed that the method proposed by Lee et al. performed the best among the three methods under relatively slow motion conditions, whereas the modified method using the diagonal covariance with a high window size performed the best under relatively fast motion conditions.
Abstract
A well-known difficulty in attitude estimation based on inertial measurement unit (IMU) signals is the occurrence of external acceleration under dynamic motion conditions, as the acceleration significantly degrades the estimation accuracy. Lee et al. (2012) designed a Kalman filter (KF) that could effectively deal with the acceleration issue. Ahmed and Tahir (2017) modified this method by adjusting the acceleration-related covariance matrix because they considered covariance modeling as a pivotal factor in the estimation accuracy. This study investigates the effects of covariance modeling on estimation accuracy in an IMU-based attitude estimation KF. The method proposed by Ahmed and Tahir can be divided into two: one uses the covariance including only diagonal components and the other uses the covariance including both diagonal and off-diagonal components. This paper compares these three methods with respect to the motion condition and the window size, which is required for the methods by Ahmed and Tahir. Experimental results showed that the method proposed by Lee et al. performed the best among the three methods under relatively slow motion conditions, whereas the modified method using the diagonal covariance with a high window size performed the best under relatively fast motion conditions.
참고문헌 (19)
- H. Zhou, "Inertial measurements of upper limb motion", Med. Biol. Eng. Comput, 44(6), pp.479~487 (2006)
- H. Zhou, "Use of multiple wearable inertial sensors in upper limb motion tracking", Med. Eng. Phys, 30(1), pp.123~133 (2008)
- Woo-Chang Jung, "Comparison of Drift Reduction Methods for Pedestrian Dead Reckoning Based on a Shoe-Mounted IMU", 센서학회지, 28(6), pp.345~354 (2019), 한국센서학회
- A. Atrsaei, "Human arm motion tracking by inertial", magnetic sensors using unscented Kalman filter and relative motion constraint, 2018, pp.90(1-2), 161~170
- B. Fasel, "Joint inertial sensor orientation drift reduction for highly dynamic movements", IEEE J. Biomed. Health Inform, 22(1), pp.77~86 (2018)
- Y. L. Hsu, "Gait and balance analysis for patients with Alzheimer's disease using an inertial-sensor-based wearable instrument", IEEE J. Biomed. Health Inform, 18(6), pp.1822~1830 (2014)
- 이정근, "서포트벡터머신을 이용한 충격전 낙상방향 판별", 센서학회지, 24(1), pp.47~53 (2015), 한국센서학회[DOI]
- G. Cooper, "Inertial sensor-based knee flexion", extension angle estimation, 2009, pp.42(16), 2678~2685
- J. B. Lee, "The use of a single inertial sensor to identify stride, step, and stance durations of running gait", J. Sci. Med. Sport, 13(2), pp.270~273 (2010)
- C. N. K. Nam, "Golf swing motion tracking using inertial sensors and a stereo camera", IEEE Trans. Instrum. Meas, 63(4), pp.943~952 (2013)
- M. Supej, "3D measurements of alpine skiing with an inertial sensor motion capture suit and GNSS RTK system", J. Sports Sci, 28(7), pp.759~769 (2010)
- A. M. Sabatini, "Quaternion-based extended Kalman filter for determining orientation by inertial and magnetic sensing", IEEE Trans. Biomed. Eng, 53(7), pp.1346~1356 (2006)
- G. Ligorio, "A novel Kalman filter for human motion tracking with an inertial-based dynamic inclinometer", IEEE Trans. Biomed. Eng, 62(8), pp.2033~2043 (2015)
- 윤득선, "GPS와 INS의 센서융합을 이용한 자율항법용 확장형 칼만필터 설계", 센서학회지, 16(4), pp.294~300 (2007), 한국센서학회
- J. K. Lee, "Robust inertial measurement unit-based attitude determination Kalman filter for kinematically constrained links", Sensors, 19(4), pp.768~ (2019)
- J. K. Lee, "Estimation of attitude and external acceleration using inertial sensor measurement during various dynamic conditions", IEEE Trans. Instrum. Meas, 61(8), pp.2262~2273 (2012)
- H. Ahmed, "Improving the accuracy of human body orientation estimation with wearable IMU sensors", IEEE Trans. Instrum. Meas, 66(3), pp.535~542 (2017)
- J. K. Lee, "Effect of strapdown integration order and sampling rate on IMU-based attitude estimation accuracy", Sensors, 18(9), pp.2775~ (2018)
- 이정근, "6 축 관성센서를 이용한 센서가속도 추정용 칼만필터", 대한기계학회논문집 A, 39(2), pp.179~185 (2015), 대한기계학회