코아-셀 구조를 가지는 전도성 폴리피롤 나노섬유를 이용한 메탄올 센서 제작
Fabrication of Methanol Sensors Using Conductive Polypyrrole Nanofibers with a Core-Shell Structure
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Electrically conductive polypyrrole-polyvinylpyrrolidone (PPy-PVP) nanofiber mats with a core-shell structure have been successfully fabricated by a two-step process: the formation of FeCl3-containing PVP nanofiber mat by electrospinning, and the vapor-phase polymerization (VPP) of pyrrole monomer on the mat in a sealed chamber at room temperature. Surface morphology and chemical composition of the PPy-PVP mat were characterized by SEM, EDX and FTIR analyses. The as-prepared nonwoven mat was composed of PPy-PVP nanofibers with an average diameter of 300 nm. The sheet conductivity of the nanofiber mat was measured to be approximately 0.01 S/cm by a four-point probe. We have also investigated gas-sensing properties of PPy-PVP nanofiber mat upon exposure to methanol vapor. The PPy-PVP nanofiber sensors were observed to have excellent methanol-sensing performance. The nanofiberbased core-shell nanostructure could give an opportunity to fabricate a highly sensitive and fast response sensor due to its high surfaceto-volume ratio.
Abstract
Electrically conductive polypyrrole-polyvinylpyrrolidone (PPy-PVP) nanofiber mats with a core-shell structure have been successfully fabricated by a two-step process: the formation of FeCl3-containing PVP nanofiber mat by electrospinning, and the vapor-phase polymerization (VPP) of pyrrole monomer on the mat in a sealed chamber at room temperature. Surface morphology and chemical composition of the PPy-PVP mat were characterized by SEM, EDX and FTIR analyses. The as-prepared nonwoven mat was composed of PPy-PVP nanofibers with an average diameter of 300 nm. The sheet conductivity of the nanofiber mat was measured to be approximately 0.01 S/cm by a four-point probe. We have also investigated gas-sensing properties of PPy-PVP nanofiber mat upon exposure to methanol vapor. The PPy-PVP nanofiber sensors were observed to have excellent methanol-sensing performance. The nanofiberbased core-shell nanostructure could give an opportunity to fabricate a highly sensitive and fast response sensor due to its high surfaceto-volume ratio.
참고문헌 (17)
- A. G. Macdiarmid, "Synthetic metals: Anovel role for organic polymers", Angew. Chem. Int. Ed., 40, pp.2581~2590 (2001)
- M. Ates, "Conducting polymers and their applications", Curr. Phys. Chem., 2, pp.224~240 (2012)
- U. Lange, "Conducting polymers in chemical sensors and arrays", Anal. Chem. Acta., 614(1), pp.1~26 (2008)
- T. V. Cemiskaya, "Polypyrrole: A conducting polymer; it’s synthesis, properties and applications", Russ. Chem. Rev., 66, pp.443~ (1997)
- X. Lu, "Onedimensional conducting polymer nanocomposites: synthesis, properties and applications", Prog. Polym. Sci., 36(5), pp.671~712 (2011)
- R. Ansari, "Polypyrrole conducting electroactive polymers:synthesis and stability studies", E.-J. Chem., 3(4), pp.186~201 (2006)
- K. Gurunathan, "Electrochemically synthtsised conducting polymeric materials gor applications towards technology in electronics, optoelectronics and energy storage devices", Mater. Chem. Phys., 61, pp.173~191 (1999)
- H. Goto, "Preparation of conducting polymers by electrochemical methods and demonstration of a polymer battery", J. Chem. Educ., 85(8), pp.1067~ (2008)
- K. P. Kamloth, "Chemical gas sensors based on organic semiconductor polypyyrrole", Crit. Rev. Anal. Chem., 32(2), pp.121~140 (2002)
- L. Guyard, "Redox chemistry of bipyrroles: Further insights into the oxidative polymerization mechanism of pyrrole and oligopyrroles", J. Phys. Chem. B, 101, pp.5698~5706 (1997)
- T. Lawal, "Vapour phase polymerization of conducting non-conducting polymers: A review", Talanta, 119, pp.133~143 (2014)
- J. Y. Kim, "Fabrication and characterization of conductive polypyrrole thin film prepared by in situ vapor-phase polymerization", Synth. Met., 32(3), pp.309~313 (2003)
- K. Kurachi, "Preparation of polypyrrole", polyethylene composite films by the vapor-phase oxidative polymerization of pyrrole, 1994, pp.26, 1325~1331
- S. Nair, "Fabrication of electrochemically conducting polypyrrole-poly (ethylene oxide)composite nanofibers", Macromol. Rapid Commun., 26, pp.1599~1603 (2005)
- A. Joshi, "Ammonia sensing properties of polypyrrole thin film at room temperature", Sens. Actuator B-Chem., 156, pp.938~942 (2011)
- L. A. Mashat, "Polypyrrole nanofiber surface acoustic wave gas sensors", Sens. Actuator B-Chem., 134, pp.826~831 (2008)
- L. Jiang, "Sensing characteristics of polypyrrole-poly (vinyl alchol) methanol sensors prepared by in situ vapor state polymerization", Sens. Actuator B-Chem., 105, pp.132~137 (2005)