전기방사를 이용한 TiO2/PVP/LiCl 나노섬유 습도 센서의 제작과 평가
Evaluation of Electrospun TiO2/PVP/LiCl Nanofiber Array for Humidity Sensing
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Recently, tremendous application utilizing electrospun nanofibers have been actively reported due to its several advantages, such as high surface to volume ratio, simple fabrication and high-throughput manufacturing. In this paper, we developed highly sensitive and consistent nanofiber humidity sensor by electrospinning. The humidity sensor was fabricated by rapid electrospinning (~2 sec) TiO2/ PVP/LiCl mixed solution on the micro-interdigitated electrode. In order to evaluate the humidity sensing performances, we measured current response using DC bias voltage under various relative humidity levels. The results show fast response / recovery time and marginal hysteresis as well as long-term stability. In addition, with the aid of micro-interdigitated electrode, we can reduce a total resistance of the sensor and increase the total reaction area of nanofibers across the electrodes resulting in high sensitivity and enhanced current level. Therefore, we expect that the electrospun nanofiber array for humidity sensor can be feasible and promising for diverse humidity sensing application.
Abstract
Recently, tremendous application utilizing electrospun nanofibers have been actively reported due to its several advantages, such as high surface to volume ratio, simple fabrication and high-throughput manufacturing. In this paper, we developed highly sensitive and consistent nanofiber humidity sensor by electrospinning. The humidity sensor was fabricated by rapid electrospinning (~2 sec) TiO2/ PVP/LiCl mixed solution on the micro-interdigitated electrode. In order to evaluate the humidity sensing performances, we measured current response using DC bias voltage under various relative humidity levels. The results show fast response / recovery time and marginal hysteresis as well as long-term stability. In addition, with the aid of micro-interdigitated electrode, we can reduce a total resistance of the sensor and increase the total reaction area of nanofibers across the electrodes resulting in high sensitivity and enhanced current level. Therefore, we expect that the electrospun nanofiber array for humidity sensor can be feasible and promising for diverse humidity sensing application.
참고문헌 (14)
- Z. Chen, "Humidity sensors: A review of materials and mechanisms", Sens. Lett., 3(4), pp.274~295 (2005)
- Z. M. Rittersma, "Recent achievements in miniaturised humidity sensors-a review of transduction techniques", Sens. Actuator A-Phys., 96(2), pp.196~210 (2002)
- U. Kang, "A high-speed capacitive humidity sensor with on-chip thermal reset", IEEE Trans. Electron Devices, 47(4), pp.702~710 (2000)
- P. G. Su, "In situ synthesized composite thin films of MWCNTs", PMMA doped with KOH as a resistive humidity sensor, 2007, pp.124(2), 303~308
- S. Muto, "A plastic optical fibre sensor for real-time humidity monitoring", Meas. Sci. Technol., 14(6), pp.746~ (2003)
- 유효봉, "부양형 탄소나노튜브 나노시트를 이용한 pH센서의 제작과 보정", 센서학회지, 22(3), pp.207~211 (2013), 한국센서학회[DOI]
- Q. Kuang, "High-aensitivity humidity sensor based on a single SnO2Nanowire", J. Am. Chem. Soc., 129(19), pp.6070~6071 (2007)
- Y. Zhang, "Detection of humidity based on quartz crystal microbalance coated with ZnO nanostructure films", Physica B, 368(1), pp.94~99 (2005)
- T. Zhang, "Analysis of dc and ac properties of humidity sensor based on polypyrrole materials", Sens. Actuator B-Chem., 131(2), pp.687~691 (2008)
- P. G. Su, "Electrical and sensing properties of a flexible humidity sensor made of polyamidoamine dendrimer-Au nanoparticles", Sens. Actuator B-Chem., 165(1), pp.151~156 (2012)
- B. Kim, "Optical switching patterns using electrospun nanofiber array", PHYSICA STATUS SOLIDI-RAPID RESEARCH LETTERS, 6, pp.409~411 (2012), Wiley-VCH Verlag
- Z. Li, "Highly sensitive and stable humidity nanosensors based on LiCl doped TiO2 electrospun nanofibers", J. Am. Chem. Soc., 130(15), pp.5036~5037 (2008)
- L. Wang, "DC humidity sensing properties of BaTiO3 nanofiber sensors with different electrode materials", Sens. Actuator B-Chem., 153(2), pp.460~464 (2011)
- Q. Qi, "Improved and excellent humidity sensitivities based on KCl-doped TiO2 electrospun nanofibers", Appl. Phys. Lett., 93(2), pp.023105~023105-3 (2008)