구조물 안전 모니터링용 파장 스위핑 레이저를 위한 스위핑 자동 선형화
Sweeping Automatic Linearization for Wavelength Swept Laser Used in Structure Safety Monitoring
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In this study, a novel method for sweeping automatic linearization of wavelength swept laser is proposed. Through the test performed on the implemented laser, the linear sweeping is held up well with a 97% decrease in nonlinearity, and 60 nm sweeping range, 1 kHz sweeping frequency, and 8.8 mW average optical power were obtained. The proposed method uses fiber Bragg grating array, opticalelectronic conversion circuit, FPGA embedded module, and a LabVIEW program to generate new compensated wave patterns which were applied to the fiber Fabry-Perot tunable filter. Linear sweeping can reduce the cumbersome and time-consuming recalibration process required for nonlinear sweeping. Additionally, the proposed method provides more accurate measurement results for the structure safety monitoring system
Abstract
In this study, a novel method for sweeping automatic linearization of wavelength swept laser is proposed. Through the test performed on the implemented laser, the linear sweeping is held up well with a 97% decrease in nonlinearity, and 60 nm sweeping range, 1 kHz sweeping frequency, and 8.8 mW average optical power were obtained. The proposed method uses fiber Bragg grating array, opticalelectronic conversion circuit, FPGA embedded module, and a LabVIEW program to generate new compensated wave patterns which were applied to the fiber Fabry-Perot tunable filter. Linear sweeping can reduce the cumbersome and time-consuming recalibration process required for nonlinear sweeping. Additionally, the proposed method provides more accurate measurement results for the structure safety monitoring system
참고문헌 (10)
- K. O. Hill, "Fiber bragg grating fundamentals and overview", J. Lightwave Technol, 15(8), pp.1263~1276 (1997)
- A. D. Kersey, "Fiber grating sensors", J. Lightwave Technol, 15(8), pp.1442~1463 (1997)
- J. C. Suarez, "Optical fibre sensors for monitoring of welding residual stresses", J. Mater. Process. Technol, 143, pp.316~320 (2003)
- R. Huber, "Fourier domain mode locking (FDML): A new laser operating regime and applications for optical coherence tomography", Opt. Express, 14, pp.3225~3237 (2006)
- 엄진섭, "FDML 방식 스위핑 광원을 사용한 SS-OCT 구현", 센서학회지, 20(1), pp.46~52 (2011), 한국센서학회
- R. Huber, "Amplified, frequency swept lasers for frequency domain reflectometry and OCT imaging : design and scaling principles", Opt. Express, 13, pp.3513~3528 (2005)
- E. Hecht, "Optics" (1987), Addison-Wesley
- Y. Lig, "Temperature and strain sensing properties of the zinc coated", OPTIK, 127(16), pp.6463~6469 (2016)
- J. C. Palais, "Fiber Optic Communications" (2005), Prentice Hall
- 유욱재, "광섬유 pH 센서 개발을 위한 분광학적 연구", 센서학회지, 18(5), pp.365~371 (2009), 한국센서학회