무게측정방식에 따른 Lever-linked Roberval Mechanism의 설계특성
Obtaining Design Characteristics of Lever-linked Roberval Mechanism through Weighing Method
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The deflection and null balance methods are used for precision force measurement in the precision industry. Since both methods arebased on deformation, the performance of the load cell mechanism is important. In this study, the design variables were obtained viathe free body diagram of a lever-linked Roberval mechanism (combined with a flexible hinge link and a Roberval mechanism), andthe design characteristics were analyzed according to the weight method. Based on the design characteristics, the optimal design wasconducted according to the weight method and FEM was used to verify its reliability.
Abstract
The deflection and null balance methods are used for precision force measurement in the precision industry. Since both methods arebased on deformation, the performance of the load cell mechanism is important. In this study, the design variables were obtained viathe free body diagram of a lever-linked Roberval mechanism (combined with a flexible hinge link and a Roberval mechanism), andthe design characteristics were analyzed according to the weight method. Based on the design characteristics, the optimal design wasconducted according to the weight method and FEM was used to verify its reliability.
참고문헌 (8)
- I. Choi, "The modelling and design of a mechanism for micro-force measurement", Meas. Sci. Technol, 12(8), pp.1270~1278 (2001)
- P. A. Jassoy, "Automatic Force Balance Check Weigher By", Radio Electron. Eng, 25(5), pp.428~431 (1963)
- Y. Yamakawa, "Reduction of the effect of floor vibrations in a checkweigher using an electromagnetic force balance system", ACTA IMEKO, 6(2), pp.65~69 (2017)
- Y. Yamakawa, "Mathematical model of checkweigher with electromagnetic force balance system", ACTA IMEKO, 3(2), pp.9~13 (2014)
- Y. K. Yong, "Review of circular flexure hinge design equations and derivation of empirical formulations", Precis. Eng, 32(2), pp.63~70 (2008)
- J. M. Paros, "How to design flexure hinges", Mach. Des, 37, pp.151~156 (1965)
- I. Choi, "Parallelism error analysis and compensation for micro-force", Meas. Sci. Technol, 15, pp.237~243 (2004)
- I. Choi, "Double force compensation method to enhance the performance of a null balance force sensor", Jpn. J. Appl. Phys, 41(6), pp.3987~3993 (2002)