Indium-Tin-Oxide 나노입자 인쇄박막의 pH sensor 응용에 대한 연구
pH Sensor Application of Printed Indium-Tin-Oxide Nanoparticle Films
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
We investigated a pH sensor using an Indium tin oxide (ITO) nanoparticle (NP) film printed on a flexible substrate. First, the printing precision and mechanical stability of the ITO-printed film were investigated. In particular, the factors that influence the crystallinity of ITO films were studied using X-ray diffraction pattern analysis. The response of the ITO pH sensor was calibrated using a series of standard pH solutions (pH 3-11). The pH values of various specimens were measured using an ITO pH sensor, and the results were compared with those of various pH measurement methods. As a result of the experiment, the maximum error was approximately ± 0.04 pH (0.4 %) at pH 9, which indicated that the ITO pH sensor is highly suitable for pH measurement. Finally, we used the ITO pH sensor to the measure of general specimens such as solvents and beverages and compared the results in comparison with those obtained from several conventional methods.
Abstract
We investigated a pH sensor using an Indium tin oxide (ITO) nanoparticle (NP) film printed on a flexible substrate. First, the printing precision and mechanical stability of the ITO-printed film were investigated. In particular, the factors that influence the crystallinity of ITO films were studied using X-ray diffraction pattern analysis. The response of the ITO pH sensor was calibrated using a series of standard pH solutions (pH 3-11). The pH values of various specimens were measured using an ITO pH sensor, and the results were compared with those of various pH measurement methods. As a result of the experiment, the maximum error was approximately ± 0.04 pH (0.4 %) at pH 9, which indicated that the ITO pH sensor is highly suitable for pH measurement. Finally, we used the ITO pH sensor to the measure of general specimens such as solvents and beverages and compared the results in comparison with those obtained from several conventional methods.
참고문헌 (20)
- S. Kim, "Dvelopment of the miniaturized four-sensor conductivity probe and the signal processing scheme", Int. J. Heat mass transf, 43, pp.4101~4118 (2000)
- J. Gallardo-Gonzalez, "A fully integrated passive microfluidic Lab-on-a-Chip for real-time electrochemical detection of ammonium : Sewage applications", Sci. Total Environ, 653, pp.1123~1230 (2019)
- G. F. Kirkbright, "Fibre-optic pH probe based on the use of an immobilised colorimetric indicator", Analyst, 109, pp.1025~1028 (1984)
- K. D. Belfield, "Fluorene-Based Metal-Ion Sensing probe with high sensitivity to Zn2+ and efficient Two-photon absorption", J. Phys. Chem. B, 114, pp.9313~9321 (2010)
- J. Hur, "Prediction of BOD, COD, and total nitrogen concentrations in a typical urban river using a fluorescence excitation-emission matrix with PARAFAC and UV absorption indices", Sensors, 12, pp.972~986 (2012)
- C. Wu, "Empirical estimation of total phosphorus concentration in the mainstream of the Qiantang River in China using Landsat TM data", Int. J. Remote Sens, 31(9), pp.2309~2324 (2010)
- D. G. Jung, "Lab-on-a-chip based total-phosphorus analysis device utilizing a photocatalytic reaction", Solid State Electron, 140, pp.100~108 (2018)
- E. Pungor, "Ion-selective membrane electrodes. A review", Analyst, 95(1132), pp.625~648 (1970)
- 이덕동, "화학 센서 기술", 센서학회지, 18(1), pp.1~21 (2009), 한국센서학회
- E. W. Moore, "Determination of pH by the glass electrode : pH meter calibration for gastric analysis", Gastroenterology, 54(4), pp.501~507 (1968)
- W. H. Choi, "pH measurement using isosbestic point of indicator", J. Korean Chem. Soc, 33(2), pp.203~207 (1989)
- B. S. Oh, "Development pH-meter using ISFET", Trans. Korean Inst. Electr, pp.301~304 (1988)
- 유욱재, "광섬유 pH 센서 개발을 위한 분광학적 연구", 센서학회지, 18(5), pp.365~371 (2009), 한국센서학회
- Y. Wang, "Study of the glass transition temperature and the mechanical properties of PET", modified silica nanocomposite by molecular dynamics simulation, 2016, pp.75, 36~45
- T. C. Li, "Fatigue life study of ITO", PET specimens in cyclic bending tests, 2015, pp.26, 250~261
- K. Utsumi, "Low resistivity ITO film prepared using the ultra high density Ito target", Thin Solid Films, 334, pp.30~34 (1998)
- M. S. Hwang, "Inkjet-printing of indium tin oxide(ITO)films for transparent conducting electrodes", Mater. Sci. Eng. B, 176, pp.1128~1131 (2011)
- J. Ederth, "Indium tin oxide films made from nanoparticles : models for the optical and electrical properties", Thin Solid Films, 445, pp.199~206 (2003)
- D. Y. Choi, "A study on pH of several beverages in korea", J. Korean Acad Oral, 20(3), pp.399~410 (1996)
- D. Li, "Solubility behavior of ethyl cellulose in supercritical fluid solvents", J. Supercrit Fluids, 28, pp.225~231 (2004)