Solid Electrochemical Method of Measuring Hydrogen Concentration with O2-/H+ Hetero-Ionic Junction
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
A novel method for measuring hydrogen concentration is introduced, along with its working principle and a novel detection algorithm. This configuration requires no additional reference compartment for potentiometric electrochemical measurements; therefore, it is the most suitable for measuring dissolved hydrogen in the liquid phase. The sensor’s electromotive force saturates at a certain point, depending on the hydrogen concentration during the heating process of the sensor operation. This dynamic temperature scanning method provides higher sensitivity than the constant temperature measurement method.
Abstract
A novel method for measuring hydrogen concentration is introduced, along with its working principle and a novel detection algorithm. This configuration requires no additional reference compartment for potentiometric electrochemical measurements; therefore, it is the most suitable for measuring dissolved hydrogen in the liquid phase. The sensor’s electromotive force saturates at a certain point, depending on the hydrogen concentration during the heating process of the sensor operation. This dynamic temperature scanning method provides higher sensitivity than the constant temperature measurement method.
참고문헌 (20)
- T. Hubert, "Hydrogen Sensors-A Review", Sens. Actuators B Chem., 157(2), pp.329~352 (2011)
- M. Anand, "Study of tin oxide for hydrogen gas sensor applications", M. S., pp.2005
- N. S. Baik, "Hydro-thermally treated sol solution of tin oxide for thin-film gas sensor", Sens. Actuators B Chem., 63(1-2), pp.74~79 (2000)
- N. Yamazoe, "Surface chemistry of neat tin oxide sensor for response to hydrogen gas in air", Sens. Actuators B Chem., 227, pp.403~410 (2016)
- Y. Chao, "Amperometric sensor for selective and stable hydrogen measurement", Sens. Actuators B Chem., 106(2), pp.784~790 (2005)
- S. W. Jung, "Communication-Concentration cell type Nafion-based potentiometric hydrogen sensors", ECS J. Solid State Sci. Technol., 7(12), pp.Q239~Q241 (2018)
- I. Lundstrom, "A hydrogen-sensitive MOS field-effect transistor", Appl. Phys. Lett., 26(2), pp.55~57 (1975)
- F. A. Lewis, "The Palladium Hydrogen System", pp.21~36 (1967), Academic Press
- G. Lu, "High-temperature hydrogen sensor based on stabilized zirconia and a metal oxide electrode", Sens. Actuators B Chem., 35(1-3), pp.130~135 (1996)
- T. Yajima, "Iwahara, Application of hydrogen sensor using proton conductive ceramics as a solid electrolyte to aluminum casting industries", Solid State Ion., 79, pp.333~337 (1995)
- C. Schwandt, "Solid state electrochemical hydrogen sensor for aluminium and aluminium alloy melts", Sens. Actuators B Chem., 187, pp.227~233 (2013)
- 정병효, "알루미늄 용탕 내 용존수소 측정용 이종접합 고체전해질 전기화학식 수소센서에 관한 연구", 박사, 신소재공학과, pp.2013
- C. Schwandt, "Comment on the article ‘New solid-state electrochemical method of measuring dissolved hydrogen in Al melt’ by S.G. Kim, B.H. Jung, C.O.Park, R.A. Rapp", Sens. Actuators B Chem., 255(2), pp.2066~2068 (2018)
- S. G. Kim, "New solid-state electrochemical method of measuring dissolved hydrogen in Al melt", Sens. Actuators B Chem., 239, pp.374~382 (2017)
- Y. C. Yang, "Oxygen sensor for the low temperature-measurement using yttria stabilized zirconia(YSZ)electrolyte and Ag electrode", J. Sens. Sci. Technol., 15(2), pp.97~101 (2006)
- K. Young, "Determination of hydrogen in titanium metal by hot extraction", Anal. Chem., 28(3), pp.372~374 (1956)
- A. M. Samuel, "The reduced pressure test as a measuring", Metall. Trans. A, 24, pp.1857~1868 (1993)
- P. D. Waite, "Improved metallurgical understanding of the Alcan compact degasser after two years of industrial implementation in aluminum casting plants", Light Metals Warrendale, pp.791~796 (1998)
- F. Paray, "In Situ Hydrogen Measurements in Liquid Al-Si foundry Alloys." (1996), McGill University
- "JANAF Thermodynamic Table", ~