중적외선 영역의 무반사 코팅된 ZnS 기판의 설계와 광학 특성
Design and Analysis of Optical Properties of Anti-reflection Coated ZnS Substrates in the Mid-infrared Region
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In this study, we fabricated ZnS substrates with excellent transmittance in the mid-infrared region (3–5 µm) using hot pressing instead of conventional chemical vapor deposition (CVD). Diamond-like carbon (DLC) was coated on either one or both sides of the ZnS substrates to improve their mechanical properties and transmittance efficiency. To reduce the reflectance and further improve transmittance in the mid-infrared region, anti-reflection (AR) coating was designed for DLC/ZnS /AR and AR/ ZnS /AR structures. The coating structure, microstructure, and optical properties of the AR-coated ZnS substrates were subsequently investigated by employing energy dispersive X-ray spectroscopy, scanning electron microscopy, and Fourier-transform infrared (FTIR) spectroscopy. The FTIR spectroscopy results demonstrated that, in the mid-infrared region, the average transmittance of the samples with AR coating on one and both sides increased by approximately 18% and 27%, respectively. Thus, AR coating improved the transmittance of the ZnS substrates.
Abstract
In this study, we fabricated ZnS substrates with excellent transmittance in the mid-infrared region (3–5 µm) using hot pressing instead of conventional chemical vapor deposition (CVD). Diamond-like carbon (DLC) was coated on either one or both sides of the ZnS substrates to improve their mechanical properties and transmittance efficiency. To reduce the reflectance and further improve transmittance in the mid-infrared region, anti-reflection (AR) coating was designed for DLC/ZnS /AR and AR/ ZnS /AR structures. The coating structure, microstructure, and optical properties of the AR-coated ZnS substrates were subsequently investigated by employing energy dispersive X-ray spectroscopy, scanning electron microscopy, and Fourier-transform infrared (FTIR) spectroscopy. The FTIR spectroscopy results demonstrated that, in the mid-infrared region, the average transmittance of the samples with AR coating on one and both sides increased by approximately 18% and 27%, respectively. Thus, AR coating improved the transmittance of the ZnS substrates.
참고문헌 (16)
- Y. Li, "Transparent and Luminescent ZnS Ceramic consolidated by Vacuum Hot Pressing Method", J. Am. Ceram. Soc, 98(10), pp.2872~2975 (2015)
- 여서영, "수열합성 공정 변화에 따른 ZnS 나노분말의 구조 특성과 소결체의 광학적 특성", 전기전자재료학회논문지, 31(6), pp.392~397 (2018), 한국전기전자재료학회[DOI]
- X. Fang, "ZnS nanostructures : From synthesis to applications", Prog. Mater. Sci, 56(2), pp.175~287 (2011)
- S. Y. Yeo, "Sintering and optical properties of transparent ZnS ceramics by preheating treatment temperature", J. Electroceram, 41(1), pp.1~8 (2018)
- 권태형, "중적외선 영역의 DLC 코팅 된 ZnS 기판의 광학 특성", 센서학회지, 28(2), pp.101~105 (2019), 한국센서학회
- G. F. Zhang, "Optical transmittance of antireflective diamond-like coatings on ZnS substrates", Sur. Coat. Technol, 82(1-2), pp.110~113 (1996)
- Q. He, "Deposition of HfO2 thin films on ZnS substrates", Thin solid Films, 516(15), pp.4695~4699 (2008)
- C. Hu, "Effects of the chemical bonding on the optical and mechanical properties for germanium carbide films used as antireflection and protection coating of ZnS windows", Condens. Matter, 8(17), pp.4231~4241 (2006)
- C. R. Lin, "Optical Propeties of Diamond-like Carbon Films for Antireflection Coating by RF Magnetron Sputtering Method", Phys. Procedia, 18, pp.46~50 (2011)
- G. F. Zhang, "Studies on diamond like carbon films for antireflection coatings of infrared optical materials", J. Appl. Phys, 76(2), pp.705~707 (1994)
- P. Manivel, "Graphene nanosheets by low-temperature thermal reduction of graphene oxide using RF-CVD", J. Exp. Nanosci, 8(3), pp.1~9 (2012)
- E. Dervishi, "Low-temperature(150o C)carbon nanotube growth on a catalytically active iron oxidegraphene nano-structural system", J. Catal, 299, pp.307~315 (2013)
- 여서영, "S", Zn의 몰비에 따른 중적외선 투과용 ZnS 세라믹스의 소결과 광학적 특성, 2019, pp.28(4), 256~261[DOI]
- M. Gilo, "Low Reflectance DLC Coatings on Various IR substrates", Proc. of SPIE, 8353(835320), pp.20~28 (2012)
- R. Z. Moghadam, "Design and fabrication of multi-layers infrared antirlection coating coasisting of ZnS and Ge on ZnS substrate", Infrared Phy. Technol, 75, pp.18~21 (2016)
- J. J. Moes, "Application of process analytical technology in tablet process development using NIR spectroscopy : Blend uniformity, cotent uniformity and coating thickness measurements", Int. J. Pharm, 357(1-2), pp.108~118 (2008)