하니컴 샌드위치 복합재를 적용한 저상버스의 충돌 및 전복 특성 연구
A study on Crashworthiness and Rollover Characteristics of Low-Floor Bus made of Honeycomb Sandwich Composites
1
조회
0
다운로드
4
인용
0
참고문헌
키워드
초록
This paper presents the evaluation of crashworthiness and rollover characteristics of low-floor bus vehicles made of aluminum honeycomb sandwich composites with glass-fabric epoxy laminate facesheets. Crashworthiness and rollover analysis of low-floor bus was carried out using explicit finite element analysis code LS-DYNA3D with the lapse of time. Material testing was conducted to determine the input parameters for the composite laminate facesheet model, and the effective equivalent damage model for the orthotropic honeycomb core material. The crash conditions of low-floor bus were frontal accident with speed of 60km/h. Rollover analysis were conducted according to the safety rules of European standard (ECE-R66). The results showed that the survival space for driver and passengers was secured against frontal crashworthiness and rollover of low-floor bus. Also, The modified Chang-Chang failure criterion is recommended to predict the failure mode of composite structures for crashworthiness and rollover analysis.
Abstract
This paper presents the evaluation of crashworthiness and rollover characteristics of low-floor bus vehicles made of aluminum honeycomb sandwich composites with glass-fabric epoxy laminate facesheets. Crashworthiness and rollover analysis of low-floor bus was carried out using explicit finite element analysis code LS-DYNA3D with the lapse of time. Material testing was conducted to determine the input parameters for the composite laminate facesheet model, and the effective equivalent damage model for the orthotropic honeycomb core material. The crash conditions of low-floor bus were frontal accident with speed of 60km/h. Rollover analysis were conducted according to the safety rules of European standard (ECE-R66). The results showed that the survival space for driver and passengers was secured against frontal crashworthiness and rollover of low-floor bus. Also, The modified Chang-Chang failure criterion is recommended to predict the failure mode of composite structures for crashworthiness and rollover analysis.
참고문헌 (13)
- "Limited Prevost Car, Intercity Bus Weight Reduction Profram Phase I, 2000", ~ (2000)
- Lee, J. Y, "A Study on Failure Evaluation if Korean Floor Bus Structure made of Hybrid Sandwich Composite", Korean Society of Automotive Engineers, 15(6) (2007)
- Y. Sukegawa, "Heavy Duty Vehicle Crash Test Method in Japan", JAMA, pp.892~898 (1998)
- Pankaj S. Deshmukh, "Rollover and Roof Crush Analysis of Low-Floor Mass Transit Bus" (2002), Ambedkar Marathwada University
- Evaluation of Occupant Protection in Buses, in:Australian Design Rule 59, "00-Omnibus Rollover Strength", 2002, Report RK02-06
- Choi, H, Y, "A Model for Predicting Damage in Graphite Epoxy Laminated Composite Resulting from Low Velocity Point Impact", Journal of Composite Material, 26, pp.2134~2169 (1992)
- Lee, J. Y, "Simulation of Low Velocity Impact of Honeycomb Sandwich Composite Panels for the BIMODAL Tram Application", Korean Society for Composite Materials, 20(4), pp.42~50 (2007)
- Azzi, V. D, "Anisotropic Strength of Composites", Experimental Mechanics, 5, pp.283~288 (1965)
- Tsai, S. W, "A General Theory of Strength for Anisotropic Materials", Journal of Composite Materials, 5, pp.58~80 (1971)
- Matzenmiller, A, "A Constitutive Model for Anisotropic Damage in Fiber-composite", Journal of Mechanical of Materials, 21, pp.125~152 (1995)
- LS-DYNA, "Keyword User's Manual, Version 971" (2006), Livermore Software Technology Corporation
- Lee, J. Y, "Simulation of Low Velocity Impact of Sandwich Panels Applied to Korean Low Floor Bus Using LS-DYNA", International Conference on Composite Materials, pp.1348~1349 (2007)
- "United Nations, Addendum 65：Regulation No. 66, Uniform Provisions Concerning the Approval of large Passenger Vehicles with Regard to the Strength of their Superstructure", ~ (1986)