적층복합재료 T-빔 기반의 3차원 직조 프리폼 π-빔 개발
Development of 3D Woven Preform π-beam based on T-beam Made of Laminated Composites
2
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
적층복합재료, 특히 탄소섬유 복합재료는 금속에 비해 가벼우며 상대적으로 비강도 및 비강성이 뛰어나기 때문에 항공 우주 산업 및 자동차 산업 등과같이 광범위한 분야에서 사용되고 있다. 그러나, 적층 복합재료는섬유의 배열이 모두 면내방향으로 배열되어있기 때문에 박리가 발생한다는 큰 단점이 있으며, 이는 적층복합재료의 응용분야를 제한한다. 본 연구에서는 먼저 π-빔과 평판이 결합된 형태의 적층복합재료 T-빔을 개발하고, 구조해석 및 기계적 물성평가를 통하여 설계변수를 최적화하였다. 이후 적층복합재료 T-빔의 설계변수를 3D 직조 프리폼에 동일하게 적용하여 T-빔을 개발하였으며, 적층구조에 비하여 향상된 기계적 강도를 달성할 수 있었다. 이러한 연구결과는 강도향상을 필요로 하는 기존의 적층복합재료 구조물에 적용 가능할 것으로 기대된다.
Abstract
Laminate composites, especially Carbon fiber-reinforced composites are wide used in various industry such as aerospace and automotive industry due to their high specific strength and specific stiffness. However, the laminate composites has a big disadvantage that delamination occurs because the arrangement of the fibers is all arranged in the in-plane direction, which limits the field of application of the laminate composites. In this study, we first developed a laminate composites T-beam in which π-beam and flat plate were combined and optimized the design parameters through structural analysis and mechanical tests. Afterwards, 3D weave preform T-beam was developed by applying the same design parameters of laminate composites T-beams, and improved mechanical strength was achieved compared to laminated structures. These findings are expected to be applicable to existing laminated composite structures that require increased strength.
참고문헌 (9)
- Kratz, J., "Resource-friendly Carbon Fibre Composites : Combining Production Waste with Virgin Feedstock", Polymer Composites Science, 3, pp.121~129 (2017)
- Pecas, P., "Natural Fibre Composites and Their Applications : A Review", Composite Science, 2, pp.66~67 (2018)
- Sridharan, S., "Woodhead Publishing Series in Composites Science and Engineering", pp.1~6 (1999)
- Chermoshentseva, A. S., "The Behavior of Delaminations in Composite Materials –Experimental Results", IOP Series : Materials Science and Engineering, 116, pp.1~8 (2016)
- Stig, F., "3D-woven Reinforcement in Composites", pp.2012
- Saboktakin, A., "3D Textile Preforms and Composites for Air-craft Structures : A REVIEW", International Journal of Aviation Aeronautics, 6, pp.1~20 (2019)
- Stig, F., "An Introduction to the Mechanics of 3D-Woven Fibre Reinforced Composite", Licentiate, pp.2009
- Owens, S.D, "Composite Structures: Theory and Practice", pp.398~409 (2000)
- Khokar, N., "3D Fabric-forming Processes : Distinguishing Between 2D-weaving, 3D-weaving and an Unspecified Noninterlacing Process", The Journal of The Textile Institute, 87, pp.97~106 (1996)