3차원으로 직조된 복합재 보강 패널의 기계적 특성 연구
Mechanical Characteristics of 3-dimensional Woven Composite Stiffened Panel
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
본 연구에서는 층간분리의 위험이 없는 3차원 직조방식으로 복합재 보강패널을 제작하고 좌굴하중과 고유진동수 등의 기계적 특성을 연구하였다. 보강패널의 스트링거와 외피는 일체형으로 제작하였고 T800급 탄소섬유로 만들어진 프리폼에 수지(EP2400)를 충진시키는 방식을 적용하였다. 제작된 보강판에 대하여 압축시험과 고유진동수 측정 시험을 수행하였고 유한요소해석 결과와 비교하였다. 또한 3차원 직조 구조물의 성능을 상대적으로 비교하기 위해 일방향 프리프레그와 2차원 평직(fabric)으로 동일한 치수의 보강패널을 제작하여 시험과 해석을 수행하였다. 시험값을 기준으로 일방향 프리프레그와 2차원 평직으로 제작된 보강패널의 좌굴하중은 3차원 직조 패널의 좌굴하중 대비 각각 20%, -3%의 차이를 보였다. 본 연구로부터 3차원 직조방식으로 제작된 일체형 보강패널의 좌굴하중은 일방향 프리프레그 적층 보강판의 좌굴하중보다는 낮지만 2차원 평직 보강판넬보다는 미세하게 높은 수준의 값을 보임을 확인하였다.
Abstract
In this paper, a composite stiffened panel was fabricated using a three-dimensional weaving method that can reduce the risk of delamination, and mechanical properties such as buckling load and natural frequency were investigated. The preform of the stringer and skin of the stiffened panel were fabricated in one piece using T800 grade carbon fiber and then, resin (EP2400) was injected into the preform. The compression test and natural frequency measurement were performed for the stiffened panel, and the results were compared with the finite element analyses. In order to compare the performance of 3D weaving structures, the stiffened panels with the same configuration were fabricated using UD and 2D plain weave (fabric) prepregs. Compared to the tested buckling load of the 3D woven panel, the buckling loads of the stiffened panels of UD prepreg and 2D plain weave exhibited +20% and -3% differences, respectively. From this study, it was confirmed that the buckling load of the stiffened panel manufactured+I9 by 3D weaving method was lower than that of the UD prepreg panel, but showed a slightly higher value than that of the 2D plain weave panel.
참고문헌 (28)
- SudhirSastry, Y. B., "Buckling Analysis of Thin Wall Stiffened Composite Panels", Computational Materials Science, 96, pp.459~471 (2015)
- Ghavami, K., "Numerical and Experimental Investigations on the Compression Behaviour of Stiffened Plates", Journal of Constructional Steel Research, 62(11), pp.1087~1100 (2006)
- Henning, F., "Fast Processing and Continuous Simulation of Automotive Structural Composite Components", Composites Science and Technology, 171, pp.261~279 (2019)
- Jung-Min Lee, "Design of Prepreg Compression Molding for Manufacturing of CFRTP B-pillar Reinforcement with Equivalent Mechanical Properties to Existing Steel Part", International Journal of Precision Engineering and Manufacturing, 21(3), pp.545~556 (2020), 한국정밀공학회[DOI]
- Vieille, B., "About the Influence of Stamping on Thermoplastic-Based Composites for Aeronautical Applications", Composites Part B : Engineering, 45(1), pp.821~834 (2013)
- Suemasu, H., "On Deformation of Woven Fabric-Reinforced Thermoplastic Composites during Stamp-Forming", Composites Manufacturing, 5(1), pp.31~39 (1994)
- Trudel-Boucher, D., "Experimental Investigation of Stamp Forming of Unconsolidated Ccommingled E-glass", polypropylene Fabrics, 2006, pp.66, 555~570
- Lebrun, G., "Thermoforming-Stamping of Continuous Glass Fiber", Polypropylene Composites : Interlaminar and Tool-Laminate Shear Properties, 2004, pp.17(2), 137~165
- Ning, H., "Design, Manufacture and Analysis of a Thermoplastic Composite Frame Structure for Mass Transit", Composite Structures, 80(1), pp.105~116 (2007)
- 노지섭, "Buckling Characteristics of Skin-Stringer Composite Stiffened Panel", 항공우주시스템공학회지, 14(6), pp.68~73 (2020), 항공우주시스템공학회[DOI]
- Ucsnik, S., "Experimental Investigation of a Novel Hybrid Metal-Composite Joining Technology", Composites Part A : Applied Science and Manufacruring, 41(3), pp.369~374 (2010)
- Park, S. M., "Strength and Failure Modes of Surface Treated CFRP Secondary Bonded Single-Lap Joints in Static and Fatigue Tensile Loading Rregimes", Composites Part A: Applied Science and Manufacruring, 134, pp.105897~ (2020)
- Hivet, G, "Consistent 3D Geometrical Model of Fabric Elementary Cell. Application to a Meshing Preprocessor for 3D Finite Element Analysis", Finite Elements in Analysis and Design, 42, pp.25~49 (2005)
- Fukuta, K., "Three-dimensional Fabric, and Method and Loom Construction for the Production Thereof", US Patent No. 3834424, ~ (1974)
- Soden, J. A., "Conventional Weaving of Shaped Preforms for Engineering Composites", Composites Part A : Applied Science and Manufacturing, 29(7), pp.757~762 (1998)
- Thomson, R. S., "The Bending Properties of Integrally Woven and Unidirectional Prepreg T-Sections", Composite Sturctures, 47, pp.781~787 (1999)
- Fu, X., "Minimum-Weight Design for Three Dimensional Woven Composite Stiffened Panels Using Neural Networks and Genetic Algorithms", Composite Structures, 134, pp.708~715 (2015)
- Mountasir, A., "Development of Multilayered Woven Panels with Integrated Stiffeners in the Transverse and Longitudinal Directions for Thermoplastic Lightweight Applications", Textile Research Journal, 83(14), pp.1532~1540 (2013)
- Perret, A., "Global behaviour of a Composite Stiffened Panel in Buckling. Part 2 : Experimental Investigation", Composite Structures, 94(2), pp.376~385 (2012)
- Yan, S., "Geometric Modeling of 3D Woven Preforms in Composite T-joints", Textile Research Journal, 88(16), pp.1862~1875 (2018)
- Song, W., "Flexural Fatigue Properties and Failure Propagation of 3D Stitched Composites under 3-Point Bending Loading", International Journal of Fatigue, 153, pp.106507~ (2021)
- Lionetto, F., "Experimental and Numerical Study of Vacuum Resin Infusion of Stiffened Carbon Fiber Reinforced Panels", Materials, 13, pp.4800~ (2020)
- Mountasir, A., "Performance of Multi-Layered Woven Panels with Integrated Stiffeners for Lightweight Engineering", 13th AUTEX world Textile Conference, pp.1~6 (2013)
- Ma, Z., "Review on the Fatigue Properties of 3D Woven Fiber", Epoxy Composites : Testing and Modelling Strategies, 2020, pp.51, 7755S~7795S
- McClain, M., "Rapid Assembly of Fiber Preforms Using 3D Woven Components", SAMPE Journal, 49, pp.24~28 (2013)
- Zhou, G., "Compressive Behavior of 3D Woven Composite Stiffened Panels : Experimental and Numerical Study", Applied Composite Materials, 24, pp.771~785 (2017)
- Field, E.I, "NASTRAN user's guide (Level 17.5) (No. NASA-CR-3146)", NASA, ~ (1979)
- Jones, R. M., "Mechanics of Composite Materials" (1999), McGraw-Hill