초임계유체 조건에서 제조된 그래핀의 구조분석과 그래핀/에폭시 수지조성물의 열전도 특성
Structural Characteristics of Graphene Prepared in Supercritical Fluids and Thermal Conductivity of Graphene/Epoxy Composites
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
초임계유체 조건은 별도의 환원제와 높은 열처리 공정조건 없이 산화그래핀으로부터 그래핀을 제조할 수 있다. 본 연구에서는 메탄올과 에탄올 용매의 초임계유체 조건에서 산화그래핀을 그래핀으로 변환시키는 공정을 연구하였다. 제조된 그래핀의 구조를 FE-SEM과 XRD를 사용하여 분석하였을 때, 초임계 조건에서 산화그래핀의 환원반응은 다른 변수(농도, 반응시간)보다는 용매의 변화에 더 크게 영향을 받았다. 에탄올 용매의 사용이 메탄올을 사용했을 때보다 환원반응에 더욱 좋은 결과를 보여주었다. 본 연구에서 준비된 그래핀을 20 wt%까지 에폭시수지와 혼합하여 복합수지 조성물을 제조하여, 이 조성물의 열전도특성을 분석하였다. 복합수지조성물의 열전도도는 그래핀의 함량에 비례하여 상승하였고, 에탄올 초임계 용액조건에서 제조된 그래핀이 복합수지조성물의 열전도도에 더 효과적이었다.
Abstract
Graphene oxide can be reduced to graphene under supercritical fluid condition even without using a specific reducing agent or applying a high thermal process. In this study, a process for converting graphene oxide into graphene was studied under supercritical fluid conditions in methanol and ethanol solvents. When the structure of asprepared graphene was analyzed by using FE-SEM and XRD, the reduction of graphene oxide in supercritical fluid condition was more affected by the change of solvent than other variables such as concentration of graphene oxide and reaction time. The use of ethanol showed better results for the reduction than the use of methanol. The graphene prepared in this study was mixed with epoxy resin up to 20 wt.% to make composites, and the thermal conductivity of the composites were analyzed. Thermal conductivity of the composite increased proportionally with graphene loadings. The graphene prepared in supercritical ethanol condition was more effective on the thermal conductivity of the composite.
참고문헌 (23)
- Zhou, W., "Thermal, Dielectric, and Mechanical Properties of SiC Particles Filled Linear Low-density Polyethylene Composites", Journal of Applied Polymer Science, 112, pp.1695~1703 (2009)
- Lee, G. W., "Structural Characterization of Carboxylated Multi-walled Carbon Nanotubes", Thin Solid Films, 516, pp.5781~5784 (2008)
- Stankovich, S., "Synthesis of Graphene-based Nanosheets via Chemical Reduction of Exfoliated Graphite Oxide", Carbon, 45, pp.1558~1565 (2007)
- Vogel, F. L., "The Electrical Conductivity of Graphite Intercalated with Superacid Fluorides : Experiments with Antimony Pentafluoride", Journal of Materials Science, 12, pp.982~986 (1977)
- Hummers, W. S., "Preparation of Graphitic Oxide", Journal of American Chemical Society, 80, pp.1339~1340 (1958)
- Lerf, A., "Structure of Graphite Oxide Revisited", Journal of Physical Chemistry B, 102, pp.4477~4482 (1998)
- Stankovich, S., "Stable Aqueous Dispersions of Graphitic Nanoplatelets via the Reduction of Exfoliated Graphite Oxide in the Presence of Poly(sodium 4-styrenesulfonate)", Journal of Materials Chemistry, 16, pp.155~158 (2006)
- Schniepp, H. C., "Functionalized Single Graphene Sheets Derived from Splitting Graphite Oxide", Journal of Physical Chemistry B, 110, pp.8535~8539 (2006)
- Eda, G., "Large-area Ultrathin Films of Reduced Graphene Oxide as a Transparent and Flexible Electronic Material", Nature Nanotechnology, 3, pp.270~274 (2008)
- Fan, X., "Deoxygenation of Exfoliated Graphite Oxide under Alkaline Conditions : A Green Route to Graphene Preparation", Advanced Materials, 20, pp.4490~4493 (2008)
- 안기호, "초임계 메탄올을 이용한 표면개질된 세리아 나노입자의 합성", Korean Chemical Engineering Research(HWAHAK KONGHAK), 50(4), pp.678~683 (2012), 한국화학공학회[DOI]
- Adschiri, T., "Hydrothermal Synthesis of Metal Oxide Nanoparticles at Supercritical Conditions", Journal of Nanoparticle Research, 3, pp.227~235 (2001)
- Lee, Y. W., "Power Generation Technology Using Supercritical Fluid", The Korean Society of Mechanical Engineers, 55, pp.46~50 (2015)
- Rangappa, D., "Rapid and Direct Conversion of Graphite Crystals into High-Yielding, Good-Quality Graphene by Supercritical Fluid Exfoliation", Chemistry A European Journal, 16, pp.6488~6494 (2010)
- Kong, C. Y., "Supercritical Fluid Conversion of Graphene Oxides", The Journal of Supercritical Fluids, 61, pp.206~211 (2012)
- Fan-Long Jin, "Synthesis and application of epoxy resins: A review", Journal of Industrial and Engineering Chemistry, 29, pp.1~11 (2015), 한국공업화학회[DOI]
- Park, C. H., "Preparation and Characterization of Dual Curable Adhesives Containing Epoxy and Acrylate Functionalities", Reactive and Functional Polymers, 73, pp.641~646 (2013)
- Liu, Y., "Mechanical Properties of Cryogenic Epoxy Adhesives : Effects of Mixed Curing Agent Content", International Journal of Adhesion and Adhesives, 41, pp.113~118 (2013)
- Koo, M., "Thermo-dependent Characteristics of Polyimide-graphene Composites", Colloid and Polymer Science, 289, pp.1503~1509 (2011)
- Park, S. -Y., "Anisotropic Thermal Characteristics of Graphene-embedded Polyimide Composite Sheets", Polymers & Polymer Composites, 24, pp.315~321 (2016)
- 오원태, "그래핀을 포함하는 폴리설폰 멤브레인의 구조 및 열 특성", 멤브레인, 28(1), pp.37~44 (2018), 한국막학회[DOI]
- 김대한, "Electrical Anisotropies of Carbon-nanotube-embedded Graphene Composite Films", Journal of the Korean Physical Society, 65(4), pp.429~435 (2014), 한국물리학회
- 김정수, "Characterization of Graphite Oxide Reduced by Thermal and", or Chemical Treatments, 2015, pp.16(5), 274~279[DOI]