유도가열 기술을 이용한 탄소섬유-열가소성 복합재의 접합 공정에 관한 연구
A Study on the Bonding Process of Carbon Fiber-Thermoplastic Composite Using Induction Heating Technology
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
본 연구에서는 동일한 열가소성 수지(PEEK)와 각기 다른 탄소섬유(Type A, Type B) UD 테이프를 이용하여 열가소성 복합재를 제작하고 제작된 각각 2개의 복합재를 유도가열 용접방식에 따라 접합 특성 및 기계적 특성에 대하여 고찰하였다. 복합재의 접합 특성과 기계적 특성은 비파괴검사인 C-Scan, B-Scan과 전단 강도(Single lap shear)를 각각 측정하였고, 열화상 카메라를 이용하여 시편 표면의 온도를 모니터링 하였다.
Abstract
In this study, thermoplastic composites were manufactured using a thermoplastic resin (PEEK) with the same melting temperature and a highly heat-resistant carbon UD tapes with different carbon fibers (Type A, Type B). And the bonding characteristics and mechanical characteristics of each of the two produced thermoplastic composites by induction heating welding were examined. The bonding characteristics and mechanical characteristics of the thermoplastic composites were performed using C-Scan and B-Scan, which is a non-destructive inspection, and the single lap shear test, respectively. The temperature of the carbon composites surface was monitored using a thermal image camera.
참고문헌 (12)
- 김정국, "비파괴검사 기술을 이용한 고분자 복합재료의 파괴모드 특성분석", 비파괴검사학회지, 38(6), pp.388~393 (2018), 한국비파괴검사학회[DOI]
- 엄찬혁, "Carbonfiber-Polymer Film 복합소재의 계면강도에 관한 연구", 한국자동차공학회 논문집, 27(6), pp.455~461 (2019), 한국자동차공학회[DOI]
- 최민식, "폴리페닐렌설파이드(PPS) 복합소재 제조 및 응용", Composites Research, 33(3), pp.91~100 (2020), 한국복합재료학회[DOI]
- 박동철, "열가소성 방향족 폴리머의 결정화 특성에 대한 연구", Composites Research, 31(2), pp.63~68 (2018), 한국복합재료학회
- Carpier, P., "About the Tensile Mechanical Behaviour of Carbon Fibers Fabrics Reinforced Thermoplastic Composites under Very High Temperature Conditions", Composite Part B : Engineering, 181, pp.107586~ (2020)
- 성정원, "자동 섬유 적층(AFP)을 활용한 열가소성 복합재의 공정 변수에 따른 기계적 물성 평가", Composites Research, 32(5), pp.229~236 (2019), 한국복합재료학회[DOI]
- Lionetto, F., "Finite Element Modeling of Continuous Induction Welding of Thermoplastic Matrix Composites", Materials and Design, 120, pp.212~221 (2017)
- Duhovic, M., "Advances in Simulating the Processing of composite Materials by Electromagnetic Induction", Proceedings of the 9th European LS-DYNA Conference (2013)
- Wan, Y., "Advanced Measurement, Characterization and Simulation of Thermoplastic Composite Induction Welding", KMUTNB International Journal of Applied Science and Technology, 7(4), pp.1~12 (2014)
- Ahmed, T. J., "Induction Welding of Thermoplastic Composites—an Overview", Composites Part A : Applied Science and Manufacturing, 37, pp.1638~1651 (2006)
- Grouve, W. J. B., "Simulating the Induction Heating of Cross-ply C", PEKK Laminates – Sensitivity and Effect of Material Variability, 2020, pp.30, 409~430
- Worrall, C. M., "Novel Induction Heating Technique for Joining of Carbon Fibre Composites", Proceedings of the ECCM16-16th European Conference on Composite Materials (2014)