고온 오븐 접합을 적용한 PEEK, PEI 기반 CF/PEKK 복합재의 접착 강도 및 계면 특성 평가
Adhesive Strength and Interface Characterization of CF/PEKK Composites with PEEK, PEI Adhesives Using High Temperature oven Welding Process
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
본 연구에서는 접착제를 구성하는 분자 결합 구조의 차이가 열가소성 복합재의 계면 특성에 미치는 영향을 판단하기 위해 진행되었다. 고온 오븐 접합 공정을 이용하여 carbonfiber/polyetherketoneketone(CF/PEKK) 열가소성 복합재료를 융합 접합, polyetheretherketone(PEEK), polyetherimide(PEI) 접착제 접착제 접합하였다. 그리고 lap 전단 강도 시험과 디지털 광학 현미경과 주사 전자 현미경을 이용한 파단면 분석, FTIR 분석을 수행하였다. 그 결과, 접착제 접합은 CF/PEKK와 접착제를 구성하는 주요 결합기인 에테르기, 케톤기, 이미드기의 결합이 증가한 인터페이즈를 형성하여 접착 강도를 강화시켰다. 그리고, 에테르기와 케톤기를 더 많이 함유한 PEEK를 사용하는 것이 더 강한 결합력을 갖는 인터페이즈를 형성하여, 복합재의 접착 강도를 향상시켰다.
Abstract
This study was conducted to determine the effect of molecular formation of adhesive on interface characterization of thermoplastic composites. Carbonfiber/polyetherketoneketone (CF/PEKK) thermoplastic composites were fusion bonded and PEEK, PEI adhesive bonded using a high-temperature oven welding process. In addition, lap shear strength test and fracture surface analysis using a digital optical microscope and a scanning electron microscope (SEM), and Fourier transform infrared spectroscopy (FTIR) were performed. As a result, the adhesive bonding method improved adhesion strength with interphase having increased molecular formation of ether groups, ketone groups, and imide groups which mainly constitutes the CF/PEKK and adhesives. Furthermore, it was found that the use of PEEK containing more ether groups and ketone groups forms a more strongly bonded interphase and enhances the adhesive force of the CF/PEKK composites.
참고문헌 (29)
- Peeters, D., "Concurrent Design and Manufacture of a Thermoplastic Composite Stiffener", Composite Structures, 212, pp.271~280 (2019)
- 권동준, "조선해양 파이프 단열재 커버 적용을 위한 내화", 난연 성능을 갖는 친환경 바잘트섬유 강화 퓨란계 복합재료 개발 연구, 2021, pp.34(1), 57~62[DOI]
- 배경민, "LNGC 경량화를 위한 파이프 지지용 클램프의 복합소재 적용 연구", Composites Research, 34(1), pp.08~15 (2021), 한국복합재료학회[DOI]
- Kappenthuler, S., "Assessing the Long-term Potential of Fiber Reinforced Polymer Composites for Sustainable Marine Construction", Journal of Ocean Engineering and Marine Energy, 7(2), pp.129~144 (2021)
- Selvaraju, S., "Applications of Composites in Marine Industry", Journal of Engineering Research and Studies, 2(2), pp.89~91 (2011)
- 강창수, "유도가열 기술을 이용한 탄소섬유-열가소성 복합재의 접합 공정에 관한 연구", Composites Research, 34(6), pp.421~425 (2021), 한국복합재료학회[DOI]
- 박동철, "열가소성 방향족 폴리머의 결정화 특성에 대한 연구", Composites Research, 31(2), pp.63~68 (2018), 한국복합재료학회
- Kassapoglou, C., "Design and Analysis of Composite Structures:with Applications to Aerospace Structures" (2013), John Wiley &Sons
- August, Z., "Recent Developments in Automated Fiber Placement of Thermoplastic Composites", SAMPE Journal, 50(2), pp.30~37 (2014)
- 이경인, "고속 열 성형 유한요소해석을 활용한 CF", PEKK 열가소성 복합재 구조물 제작 공정 예측 및 검증, 2021, pp.34(5), 296~304[DOI]
- Jogur, G., "Impact Properties of Thermoplastic Composites", Textile Progress, 50(3), pp.109~183 (2018)
- Machado, C. M., "A New Approach to Assess Delamination in Drilling Carbon Fibre-reinforced Epoxy Composite Materials", The International Journal of Advanced Manufacturing Technology, 112(11), pp.3389~3398 (2021)
- Cheung, C. H., "Numerical Analysis of Fastener Delamination", disbond Arrest Mechanism in Aircraft Composite Structures, 2012, pp.49(2), 630~635
- Park, H. J., "Effects of Stacking Sequence and Clamping Force on the Bearing Strengths of Mechanically Fastened Joints in Composite Laminates", Composite Structures, 53(2), pp.213~221 (2001)
- Farahani, R. D., "Conductive Films of Silver Nanoparticles as Novel Susceptors for Induction Welding of Thermoplastic Composites", Nanotechnology, 29(12), pp.125701~ (2018)
- Ahmad Sobri, S., "Augmentation of the Delamination Factor in Drilling of Carbon Fibre-reinforced Polymer Composites(CFRP)", Polymers, 12(11), pp.2461~ (2020)
- Babu, J., "Assessment of Delamination in Composite Materials : A Review", Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 230(11), pp.1990~2003 (2016)
- Zhao, T., "Mechanical Behaviour of Thermoplastic Composites Spot-welded and Mechanically Fastened Joints : A preliminary comparison", Composites Part B : Engineering, 112, pp.224~234 (2017)
- Yousefpour, A., "Fusion Bonding", welding of Thermoplastic Composites, 2005, pp.17(4), 303~341
- Costa, A. P. D., "A Review of Welding Technologies for Thermoplastic Composites in Aerospace Applications", Journal of Aerospace Technology and Management, 4(3), pp.255~265 (2012)
- Lionetto, F., "On the Delamination and Debond Suppression in Structural Joints by Z-fibre Pinning", Composites Part A : Applied Science and Manufacturing, 38(4), pp.1107~1115 (2007)
- Lionetto, F., "Ultrasonic Spot Welding of Carbon Fiber Reinforced Epoxy Composites to Aluminum : Mechanical and Electrochemical Characterization", Composites Part B : Engineering, 144, pp.134~142 (2018)
- Gkikas, G., "Corrosion and Environmental Degradation of Bonded Composite Repair", International Journal of Structural Integrity, 4(1), pp.67~77 (2013)
- David, A. D., "Advances in Structural Adhesive Bonding" (2010), Woodhead Publishing
- Hu, X., "Implantable PEKK", tantalum Microparticles Composite with Improved Surface Performances for Regulating Cell Behaviors, Promoting Bone Formation and Osseointegration, 2021, pp.6(4), 928~940
- Thull, D., "Investigation of Fluorinebased Release Agents for Structural Adhesive Bonding of Carbon Fibre Reinforced Plastics", Applied Adhesion Science, 7(1), pp.1~19 (2019)
- Norman, J.J., "Toughened Composites: Symposium on Toughened Composites", ASTM International, ~ (1987)
- Todo, M., "Mode II Interlaminar Fracture Behavior of Fiber Reinforced Polyamide Composites under Static and Dynamic Loading Conditions", Journal of Reinforced Plastics and Composites, 18(15), pp.1415~1427 (1999)
- Park, S. J., "The Adhesion Properties of CF", PEKK Composites with PEI and PEEK Adhesive Film in Oven Welding Process, Korea Maritime and Ocean University, 2022