저속충격을 받는 적층복합재료 평판의 직접 수치모사
Direct Numerical Simulation of Composite laminates Under low velocity Impact
2
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
적층 복합재료에 가해지는 저속충격에 의한 동적 거동 및 손상의 예측은 복합재 구조물의 설계에 중요한 문제가 되고 있다. 특히 저속충격에 의한 손상을 기술하기 위하여 적층판 내의 면내응력 뿐만 아니라 층간응력이 중요한 역할을 하는데, 기존의 전통적인 접근 방법은 이들을 효과적으로 기술하지 못하는 단점이 있다. 본 논문에서는 이러한 동적거동 및 손상을 기술하기 위한 수치해석 모델로서 내부 미시구조를 고려한 직접수치모사(DNS)방법을 이용하여 DNS 모델을 구성하였다. 그리고 이를 저속충격 문제에 적용하여 저속충격에 의한 동적 거동 및 재료내의 층간응력 해석을 미시적으로 접근하였다. 이때 기존의 거시적인 접근 방법에 따른 균질모델의 결과와 비교 해석을 보였다. 한편 복합재료 적층판의 효율적인 저속충격해석을 위하여 DNS 개념을 적용한 멀티스케일 모델을 개발하여 기존의 균질화된 모델에서 보일 수 없었던 충격 부위의 국부적인 동적 거동을 효과적으로 기술하였다.
Abstract
Prediction of damage caused by low-velocity impact in laminated composite plate is an important problem faced by designers using composites. Not only the inplane stresses but also the interlaminar normal and shear stresses play a role in estimating the damage caused. But it is well known that the conventional approach based on the homogenization has the limit in description of damage. The work reported here is an effort in getting better predictions of dynamic behavior and damage in composite plate using DNS approach. In the DNS model, we discretize the composite plates through separate modeling of fiber and matrix for the local microscopic analysis. In the view of microscopic mechanics with DNS model, interlaminar stress behaviors in the inside of composite materials are investigated and compared with the results of the homogenized model which has been used in the conventional approach to impact analysis. Also the multiscale model based on DNS concept is developed in order to enhance the effectiveness of impact analysis, and we present the results of multiscale analysis considering micro and macro structures simultaneously.
참고문헌 (18)
- Abrate S, "Impact on Laminated Composite Supported materials", Applied Mechanics Review, 44, pp.155~190 (1991)
- Cantwell W.J, "The Impact Resistance of Composite Materials - a Review", Composites, 5, pp.347~362 (1991)
- Liu D, "Structural Degradation of Impacted Graphite", Epoxy Laminates, 1986, 51~60
- Madan R.C, "Influence of Low-Velocity Impact on Compoiste Structures", Composite Materials: Fatigue and Fracture, 3, pp.457~475 (1991)
- Cristescu N, "Failure Mechanics in Composite Plates Impacted by Blunt-Ended Penetrator", ASTM STP, 568, pp.159~172 (1975)
- Clark G, "Modeling of Impact Damage in Composite Laminates", Composites, 20, pp.209~214 (1989)
- D.Liu, "Impact-Induced Delamination - A view of Bending Stiffness Mismatching", Journal of Composite Materials, 22, pp.674~692 (1988)
- Chang F.K, "Study on Impact Damage in Laminated Composites", Mechanics of Materials, 10, pp.83~95 (1990)
- Aboudi J, "Mechanics of Composite Materials: A Unified Micro-Mechanical pproach,Elsevier, New York", ~ (1991)
- Sun C.T, "Prediction of Composite Properties from a Representative Volume Element", Composites Science and Technology, 56, pp.171~179 (1996)
- Kim S.J, "Direct Numerical Simulation of Composite Structures", Journal of Composite Materials, 36(24), pp.2765~2785 (2002)
- Pagano N.J, "Elastic Behavior of Multilayered Bidirectional Composites", AIAA Journal, 10, pp.931~933 (1972)
- Lajczok M.R, "New Approach in the Determination of Interlaminar Shear Stresses from the Results of MSC", NASTRAN, 1986, pp.24, 651~656
- Tolson S, "Finite Element Analysis of Progressive Failure in Laminated Composite Plates", Computers and Structures, 38, pp.361~376 (1991)
- Lo K.H, "Stress Solution Determination for Higher Order Plate Theory", IJSS, 14, pp.655~662 (1978)
- Redd J.N, "A Refined Nonlinear Theory of Plates with Transverse Shear Deformation", IJSS, 20, pp.881~896 (1984)
- LS-DYNA3D, "User's Manual ver.936", Livermore Software Technology Corporation, ~ (1995)
- Ji K.H, "Impact and Failure Analysis of Composite Plates by Multiscale modeling", 14th ICCM, ~ (2003)